1
0

Reduce code size of magic commands

This commit is contained in:
tmk 2015-05-13 15:29:30 +09:00
parent 192024124b
commit 67137a908a

Vedi File

@ -112,30 +112,33 @@ bool command_console_extra(uint8_t code)
***********************************************************/
static void command_common_help(void)
{
print("\n\n----- Command Help -----\n");
print("c: enter console mode\n");
print("d: toggle debug enable\n");
print("x: toggle matrix debug\n");
print("k: toggle keyboard debug\n");
print("m: toggle mouse debug\n");
#ifdef SLEEP_LED_ENABLE
print("z: toggle sleep LED test\n");
print("\n\t- Magic -\n"
"d: debug\n"
"x: debug matrix\n"
"k: debug keyboard\n"
"m: debug mouse\n"
"v: version\n"
"s: status\n"
"c: console mode\n"
"0-4: layer0-4(F10-F4)\n"
"Paus: bootloader\n"
#ifdef KEYBOARD_LOCK_ENABLE
"Caps: Lock\n"
#endif
print("v: print device version & info\n");
print("t: print timer count\n");
print("s: print status\n");
print("e: print eeprom config\n");
#ifdef BOOTMAGIC_ENABLE
"e: eeprom\n"
#endif
#ifdef NKRO_ENABLE
print("n: toggle NKRO\n");
"n: NKRO\n"
#endif
print("0/F10: switch to Layer0 \n");
print("1/F1: switch to Layer1 \n");
print("2/F2: switch to Layer2 \n");
print("3/F3: switch to Layer3 \n");
print("4/F4: switch to Layer4 \n");
print("PScr: power down/remote wake-up\n");
print("Caps: Lock Keyboard(Child Proof)\n");
print("Paus: jump to bootloader\n");
#ifdef SLEEP_LED_ENABLE
"z: sleep LED test\n"
#endif
);
}
#ifdef BOOTMAGIC_ENABLE
@ -191,6 +194,7 @@ static bool command_common(uint8_t code)
print_eeconfig();
break;
#endif
#ifdef KEYBOARD_LOCK_ENABLE
case KC_CAPSLOCK:
if (host_get_driver()) {
host_driver = host_get_driver();
@ -202,6 +206,7 @@ static bool command_common(uint8_t code)
print("Unlocked.\n");
}
break;
#endif
case KC_H:
case KC_SLASH: /* ? */
command_common_help();
@ -212,58 +217,56 @@ static bool command_common(uint8_t code)
debug_mouse = false;
debug_enable = false;
command_console_help();
print("\nEnter Console Mode\n");
print("C> ");
command_state = CONSOLE;
break;
case KC_PAUSE:
clear_keyboard();
print("\n\nJump to bootloader... ");
print("\n\nbootloader... ");
_delay_ms(1000);
bootloader_jump(); // not return
print("not supported.\n");
break;
case KC_D:
if (debug_enable) {
print("\nDEBUG: disabled.\n");
print("\ndebug: on\n");
debug_matrix = false;
debug_keyboard = false;
debug_mouse = false;
debug_enable = false;
} else {
print("\nDEBUG: enabled.\n");
print("\ndebug: off\n");
debug_enable = true;
}
break;
case KC_X: // debug matrix toggle
debug_matrix = !debug_matrix;
if (debug_matrix) {
print("\nDEBUG: matrix enabled.\n");
print("\nmatrix: on\n");
debug_enable = true;
} else {
print("\nDEBUG: matrix disabled.\n");
print("\nmatrix: off\n");
}
break;
case KC_K: // debug keyboard toggle
debug_keyboard = !debug_keyboard;
if (debug_keyboard) {
print("\nDEBUG: keyboard enabled.\n");
print("\nkeyboard: on\n");
debug_enable = true;
} else {
print("\nDEBUG: keyboard disabled.\n");
print("\nkeyboard: off\n");
}
break;
case KC_M: // debug mouse toggle
debug_mouse = !debug_mouse;
if (debug_mouse) {
print("\nDEBUG: mouse enabled.\n");
print("\nmouse: on\n");
debug_enable = true;
} else {
print("\nDEBUG: mouse disabled.\n");
print("\nmouse: off\n");
}
break;
case KC_V: // print version & information
print("\n\n----- Version -----\n");
print("\n\t- Version -\n");
print("DESC: " STR(DESCRIPTION) "\n");
print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
"PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
@ -307,14 +310,13 @@ static bool command_common(uint8_t code)
" AVR-LIBC: " __AVR_LIBC_VERSION_STRING__
" AVR_ARCH: avr" STR(__AVR_ARCH__) "\n");
break;
case KC_T: // print timer
print_val_hex32(timer_count);
break;
case KC_S:
print("\n\n----- Status -----\n");
print("\n\t- Status -\n");
print_val_hex8(host_keyboard_leds());
print_val_hex8(keyboard_protocol);
print_val_hex8(keyboard_idle);
print_val_hex32(timer_count);
#ifdef PROTOCOL_PJRC
print_val_hex8(UDCON);
print_val_hex8(UDIEN);
@ -334,39 +336,21 @@ static bool command_common(uint8_t code)
clear_keyboard(); //Prevents stuck keys.
keyboard_nkro = !keyboard_nkro;
if (keyboard_nkro)
print("NKRO: enabled\n");
print("NKRO: on\n");
else
print("NKRO: disabled\n");
break;
#endif
#ifdef EXTRAKEY_ENABLE
case KC_PSCREEN:
// TODO: Power key should take this feature? otherwise any key during suspend.
#ifdef PROTOCOL_PJRC
if (suspend && remote_wakeup) {
usb_remote_wakeup();
} else {
host_system_send(SYSTEM_POWER_DOWN);
host_system_send(0);
_delay_ms(500);
}
#else
host_system_send(SYSTEM_POWER_DOWN);
_delay_ms(100);
host_system_send(0);
_delay_ms(500);
#endif
print("NKRO: off\n");
break;
#endif
case KC_ESC:
case KC_GRV:
case KC_0:
case KC_F10:
switch_default_layer(0);
break;
case KC_1 ... KC_9:
switch_default_layer((code - KC_1) + 1);
break;
case KC_F1 ... KC_F12:
case KC_F1 ... KC_F9:
switch_default_layer((code - KC_F1) + 1);
break;
default:
@ -382,11 +366,12 @@ static bool command_common(uint8_t code)
***********************************************************/
static void command_console_help(void)
{
print("\n\n----- Console Help -----\n");
print("ESC/q: quit\n");
print("\n\t- Console -\n"
"ESC/q: quit\n"
#ifdef MOUSEKEY_ENABLE
print("m: mousekey\n");
"m: mousekey\n"
#endif
);
}
static bool command_console(uint8_t code)
@ -398,14 +383,12 @@ static bool command_console(uint8_t code)
break;
case KC_Q:
case KC_ESC:
print("\nQuit Console Mode\n");
command_state = ONESHOT;
return false;
#ifdef MOUSEKEY_ENABLE
case KC_M:
mousekey_console_help();
print("\nEnter Mousekey Console\n");
print("M0>");
print("M> ");
command_state = MOUSEKEY;
return true;
#endif
@ -426,16 +409,17 @@ static uint8_t mousekey_param = 0;
static void mousekey_param_print(void)
{
print("\n\n----- Mousekey Parameters -----\n");
print("1: mk_delay(*10ms): "); pdec(mk_delay); print("\n");
print("2: mk_interval(ms): "); pdec(mk_interval); print("\n");
print("3: mk_max_speed: "); pdec(mk_max_speed); print("\n");
print("4: mk_time_to_max: "); pdec(mk_time_to_max); print("\n");
print("5: mk_wheel_max_speed: "); pdec(mk_wheel_max_speed); print("\n");
print("6: mk_wheel_time_to_max: "); pdec(mk_wheel_time_to_max); print("\n");
print("\n\t- Values -\n");
print("1: delay(*10ms): "); pdec(mk_delay); print("\n");
print("2: interval(ms): "); pdec(mk_interval); print("\n");
print("3: max_speed: "); pdec(mk_max_speed); print("\n");
print("4: time_to_max: "); pdec(mk_time_to_max); print("\n");
print("5: wheel_max_speed: "); pdec(mk_wheel_max_speed); print("\n");
print("6: wheel_time_to_max: "); pdec(mk_wheel_time_to_max); print("\n");
}
#define PRINT_SET_VAL(v) print(#v " = "); print_dec(v); print("\n");
//#define PRINT_SET_VAL(v) print(#v " = "); print_dec(v); print("\n");
#define PRINT_SET_VAL(v) xprintf(#v " = %d\n", (v))
static void mousekey_param_inc(uint8_t param, uint8_t inc)
{
switch (param) {
@ -534,24 +518,25 @@ static void mousekey_param_dec(uint8_t param, uint8_t dec)
static void mousekey_console_help(void)
{
print("\n\n----- Mousekey Parameters Help -----\n");
print("ESC/q: quit\n");
print("1: select mk_delay(*10ms)\n");
print("2: select mk_interval(ms)\n");
print("3: select mk_max_speed\n");
print("4: select mk_time_to_max\n");
print("5: select mk_wheel_max_speed\n");
print("6: select mk_wheel_time_to_max\n");
print("p: print parameters\n");
print("d: set default values\n");
print("up: increase parameters(+1)\n");
print("down: decrease parameters(-1)\n");
print("pgup: increase parameters(+10)\n");
print("pgdown: decrease parameters(-10)\n");
print("\nspeed = delta * max_speed * (repeat / time_to_max)\n");
print("where delta: cursor="); pdec(MOUSEKEY_MOVE_DELTA);
print(", wheel="); pdec(MOUSEKEY_WHEEL_DELTA); print("\n");
print("See http://en.wikipedia.org/wiki/Mouse_keys\n");
print("\n\t- Mousekey -\n"
"ESC/q: quit\n"
"1: delay(*10ms)\n"
"2: interval(ms)\n"
"3: max_speed\n"
"4: time_to_max\n"
"5: wheel_max_speed\n"
"6: wheel_time_to_max\n"
"\n"
"p: print values\n"
"d: set defaults\n"
"up: +1\n"
"down: -1\n"
"pgup: +10\n"
"pgdown: -10\n"
"\n"
"speed = delta * max_speed * (repeat / time_to_max)\n");
xprintf("where delta: cursor=%d, wheel=%d\n"
"See http://en.wikipedia.org/wiki/Mouse_keys\n", MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA);
}
static bool mousekey_console(uint8_t code)
@ -563,11 +548,14 @@ static bool mousekey_console(uint8_t code)
break;
case KC_Q:
case KC_ESC:
mousekey_param = 0;
print("\nQuit Mousekey Console\n");
print("C> ");
command_state = CONSOLE;
return false;
if (mousekey_param) {
mousekey_param = 0;
} else {
print("C> ");
command_state = CONSOLE;
return false;
}
break;
case KC_P:
mousekey_param_print();
break;
@ -577,12 +565,7 @@ static bool mousekey_console(uint8_t code)
case KC_4:
case KC_5:
case KC_6:
case KC_7:
case KC_8:
case KC_9:
case KC_0:
mousekey_param = numkey2num(code);
print("selected parameter: "); pdec(mousekey_param); print("\n");
break;
case KC_UP:
mousekey_param_inc(mousekey_param, 1);
@ -603,13 +586,16 @@ static bool mousekey_console(uint8_t code)
mk_time_to_max = MOUSEKEY_TIME_TO_MAX;
mk_wheel_max_speed = MOUSEKEY_WHEEL_MAX_SPEED;
mk_wheel_time_to_max = MOUSEKEY_WHEEL_TIME_TO_MAX;
print("set default values.\n");
print("set default\n");
break;
default:
print("?");
return false;
}
print("M"); pdec(mousekey_param); print("> ");
if (mousekey_param)
xprintf("M%d> ", mousekey_param);
else
print("M>" );
return true;
}
#endif
@ -637,8 +623,7 @@ static uint8_t numkey2num(uint8_t code)
static void switch_default_layer(uint8_t layer)
{
print("switch_default_layer: "); print_dec(biton32(default_layer_state));
print(" to "); print_dec(layer); print("\n");
xprintf("L%d\n", layer);
default_layer_set(1UL<<layer);
clear_keyboard();
}