diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md index bd8bef9f..b3fb8f7e 100644 --- a/converter/m0110_usb/README.md +++ b/converter/m0110_usb/README.md @@ -1,10 +1,12 @@ M0110/M0110A to USB keyboard converter ====================================== -This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB. -Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though, -you can use other board with USB AVR like `ATmega32U4` and `AT90USB`. +This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. + +Pics of **M0110 + M0120** and **M0110A**. + +![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg) +![M0110A](http://i.imgur.com/HuHOEoHm.jpg) -![M0110](https://raw.github.com/tmk/tmk_keyboard/master/converter/m0110_usb/doc/m0110.jpg) - M0110A support was contributed by [skagon@github](https://github.com/skagon). - M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys. @@ -13,49 +15,42 @@ you can use other board with USB AVR like `ATmega32U4` and `AT90USB`. Update ------ -- 2013/08 Change port for signals PF to PD +- 2013/08: Change port for signals `PF` to `PD` +- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. -Connection ----------- -You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard. -Teensy port `PD0` is assigned for `CLOCK` line and `PD1` for `DATA` by default, -you can change pin configuration with editing *config.h*. +Building Hardware +----------------- +You need **4P4C** cable and **ATMega32U4** board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. -You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection -while Macintosh keyboard cable is *straight*. +[![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg) -[![Conection](https://raw.github.com/tmk/tmk_keyboard/master/converter/m0110_usb/doc/teensy.jpg)] +### 4P4C phone handset cable +Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. -In this pic: + -1. `GND`(Black) -2. `CLOCK`(Red) -3. `DATA`(Green) -4. `+5V`(Yellow) +Close-up pic of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. +[![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1) -Note that wire colors may vary in your cable. +[Teensy]: http://www.pjrc.com/teensy/ -### Pinout +### Socket Pinout - -- ![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png) ### Pull-up Registor -You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular -when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose. -In some cases MCU can't read signal from keyboard correctly without pull-up resistors. +You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. Building Frimware ----------------- -To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows. -You can edit *Makefile* and *config.h* to change compile options and pin configuration. +To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. $ git clone git://github.com/tmk/tmk_keyboard.git (or download source) $ cd m0110_usb @@ -71,64 +66,69 @@ Keymap You can change keymaps by editing *keymap.c*. ### M0110 & M0120 -#### *Default* - ,---------------------------------------------------------. ,---------------. - | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| -|Lft|Rgt| - |---------------------------------------------------------| |---------------| - |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up| - |---------------------------------------------------------| |---------------| - |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| Dn| - |---------------------------------------------------------| |---------------| - |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | - `---------------------------------------------------------' |-----------|Ent| - |Ctl|Alt | Space |Gui |Ctl| | 0| .| | - `-----------------------------------------------' `---------------' -#### *HHKB/WASD Layer(WASD/IJKL)* - ,---------------------------------------------------------. ,---------------. - |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt| - |---------------------------------------------------------| |---------------| - |Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau|Ins| | 7| 8| 9| Up| - |---------------------------------------------------------| |---------------| - |Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| Dn| - |---------------------------------------------------------| |---------------| - |Shift |End| |PgD| | | |PgD| |End| |Shift | | 1| 2| 3| | - `---------------------------------------------------------' |-----------|Ent| - |Ctl|Alt | Space |Gui |Ctl| | 0| .| | - `-----------------------------------------------' `---------------' +#### *Default Layer* + ,---------------------------------------------------------. ,---------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -|Lft|Rgt| + |---------------------------------------------------------| |---------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up| + |---------------------------------------------------------| |---------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| Dn| + |---------------------------------------------------------| |---------------| + |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + `---------------------------------------------------------' |-----------|Ent| + |Ctl|Gui | Space |Alt |Ctl| | 0| .| | + `-----------------------------------------------' `---------------' + +- `Space` and `Enter` also work as `Fn` layer switch key when holding down. + +#### *Function Layer(WASD/HHKB)* + ,---------------------------------------------------------. ,---------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt| + |---------------------------------------------------------| |---------------| + |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \| | 7| 8| 9| Up| + |---------------------------------------------------------| |---------------| + |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| Dn| + |---------------------------------------------------------| |---------------| + |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | + `---------------------------------------------------------' |-----------|Ent| + |Ctl|Gui | Space |Alt |Ctl| | 0| .| | + `-----------------------------------------------' `---------------' + ### M0110A -#### *Default* +#### *Default Layer* ,---------------------------------------------------------. ,---------------. - | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| =| /| *| + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| |---------------------------------------------------------| |---------------| |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| |-----------------------------------------------------' | |---------------| - |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| |---------------------------------------------------------| |---------------| |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft| Up| | 1| 2| 3| | |---------------------------------------------------------| |-----------|Ent| - |Alt |Gui | Space | \|Lft|Rgt| Dn| | 0| .| | + |Ctrl |Gui | Space | \|Lft|Rgt|Dwn| | 0| .| | `---------------------------------------------------------' `---------------' -#### *Cursor Layer(WASD/IJKL)* + +- `Space` and `Enter` also work as `Fn` layer switch key when holding down. +- `Backslash(\)` also works as `Alt` when holding down. + +#### *Function Layer(WASD/HHKB)* ,---------------------------------------------------------. ,---------------. |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| |---------------------------------------------------------| |---------------| - |Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau| | | 7| 8| 9| -| + |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| |-----------------------------------------------------' | |---------------| - |Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| +| + |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +| |---------------------------------------------------------| |---------------| - |Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| | + |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| | |---------------------------------------------------------| |-----------|Ent| - |Alt |Gui | Space |Ins|Hom|End|PgD| | 0| .| | + |Ctrl |Gui | Space | \|Hom|End|PgD| | 0| .| | `---------------------------------------------------------' `---------------' Debug ----- -You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. +You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `+H` simultaneously to get help. -The converter has some functions for debug, press `+H` simultaneously to get help. -These function is totally undocumented, tentative, inconsistent and buggy. - -magickey: Shift+Option+Command(Shift+Alt+Gui or Shift+Alt+Control) +- Command: `Shift+Option+Command`(`Shift+Alt+Gui` or `Shift+Alt+Control`) diff --git a/converter/m0110_usb/doc/m0110.jpg b/converter/m0110_usb/doc/m0110.jpg deleted file mode 100644 index ef9a123a..00000000 Binary files a/converter/m0110_usb/doc/m0110.jpg and /dev/null differ diff --git a/converter/m0110_usb/doc/teensy.jpg b/converter/m0110_usb/doc/teensy.jpg deleted file mode 100644 index 96e93e7e..00000000 Binary files a/converter/m0110_usb/doc/teensy.jpg and /dev/null differ