- change initialize of keyboard in matrix_scan() - keymap for 122 keys - Mafilefie and config.h for LUFA and PS/2 USARTtags/v1.9
@@ -0,0 +1,113 @@ | |||
# Target file name (without extension). | |||
TARGET = terminal_lufa | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap.c \ | |||
matrix.c \ | |||
led.c | |||
CONFIG_H = config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
#MCU = at90usb162 # Teensy 1.0 | |||
MCU = atmega32u4 # Teensy 2.0 | |||
#MCU = at90usb646 # Teensy++ 1.0 | |||
#MCU = at90usb1286 # Teensy++ 2.0 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in bytes | |||
# Teensy halfKay 512 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
# | |||
# PS/2 protocol implementations | |||
# USART is recommended if it is available, others are for reference purpose. | |||
# INT implementation will drop simultaneous key strokes. | |||
# | |||
PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |||
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code | |||
ifdef PS2_USE_USART | |||
SRC += protocol/ps2_usart.c | |||
OPT_DEFS += -DPS2_USE_USART | |||
endif | |||
ifdef PS2_USE_INT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_INT | |||
endif | |||
ifdef PS2_USE_BUSYWAIT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_BUSYWAIT | |||
endif | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/lufa.mk | |||
include $(TOP_DIR)/protocol.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -1,61 +0,0 @@ | |||
# | |||
# Makefile for PJRC Teensy | |||
# | |||
# Target file name (without extension). | |||
TARGET = terminal_usb_102_pjrc | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap_102.c \ | |||
matrix.c \ | |||
led.c \ | |||
ps2.c | |||
CONFIG_H = config_102_pjrc.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
#MCU = at90usb162 # Teensy 1.0 | |||
MCU = atmega32u4 # Teensy 2.0 | |||
#MCU = at90usb646 # Teensy++ 1.0 | |||
#MCU = at90usb1286 # Teensy++ 2.0 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# Build Options | |||
# *Comment out* to disable the options. | |||
# | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/pjrc.mk | |||
include $(TOP_DIR)/protocol.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -1,61 +0,0 @@ | |||
# | |||
# Makefile for PJRC Teensy | |||
# | |||
# Target file name (without extension). | |||
TARGET = terminal_usb_122_pjrc | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap_122.c \ | |||
matrix.c \ | |||
led.c \ | |||
ps2.c | |||
CONFIG_H = config_122_pjrc.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
#MCU = at90usb162 # Teensy 1.0 | |||
MCU = atmega32u4 # Teensy 2.0 | |||
#MCU = at90usb646 # Teensy++ 1.0 | |||
#MCU = at90usb1286 # Teensy++ 2.0 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# Build Options | |||
# *Comment out* to disable the options. | |||
# | |||
#MOUSEKEY_ENABLE = yes # Mouse keys | |||
#EXTRAKEY_ENABLE = yes # Audio control and System control | |||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/pjrc.mk | |||
include $(TOP_DIR)/protocol.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -0,0 +1,138 @@ | |||
/* | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6535 | |||
#define DEVICE_VER 0x0100 | |||
#define MANUFACTURER t.m.k. | |||
#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 122keys) | |||
#define DESCRIPTION USB converter for IBM Terminal Keyboard 122keys | |||
/* matrix size */ | |||
#define MATRIX_ROWS 17 // keycode bit: 3-0 | |||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||
/* legacy keymap support */ | |||
#define USE_LEGACY_KEYMAP | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \ | |||
(keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \ | |||
) | |||
/* | |||
* PS/2 USART configuration for ATMega32U4 | |||
*/ | |||
#ifdef PS2_USE_USART | |||
/* XCK for clock line */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 5 | |||
/* RXD for data line */ | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 2 | |||
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ | |||
/* set DDR of CLOCK as input to be slave */ | |||
#define PS2_USART_INIT() do { \ | |||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | |||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | |||
UCSR1C = ((1 << UMSEL10) | \ | |||
(3 << UPM10) | \ | |||
(0 << USBS1) | \ | |||
(3 << UCSZ10) | \ | |||
(0 << UCPOL1)); \ | |||
UCSR1A = 0; \ | |||
UBRR1H = 0; \ | |||
UBRR1L = 0; \ | |||
} while (0) | |||
#define PS2_USART_RX_INT_ON() do { \ | |||
UCSR1B = ((1 << RXCIE1) | \ | |||
(1 << RXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_POLL_ON() do { \ | |||
UCSR1B = (1 << RXEN1); \ | |||
} while (0) | |||
#define PS2_USART_OFF() do { \ | |||
UCSR1C = 0; \ | |||
UCSR1B &= ~((1 << RXEN1) | \ | |||
(1 << TXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) | |||
#define PS2_USART_RX_DATA UDR1 | |||
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) | |||
#define PS2_USART_RX_VECT USART1_RX_vect | |||
#endif | |||
/* | |||
* PS/2 Interrupt configuration | |||
*/ | |||
#ifdef PS2_USE_INT | |||
/* uses INT1 for clock line(ATMega32U4) */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 1 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#define PS2_INT_INIT() do { \ | |||
EICRA |= ((1<<ISC11) | \ | |||
(0<<ISC10)); \ | |||
} while (0) | |||
#define PS2_INT_ON() do { \ | |||
EIMSK |= (1<<INT1); \ | |||
} while (0) | |||
#define PS2_INT_OFF() do { \ | |||
EIMSK &= ~(1<<INT1); \ | |||
} while (0) | |||
#define PS2_INT_VECT INT1_vect | |||
#endif | |||
/* | |||
* PS/2 Busywait configuration | |||
*/ | |||
#ifdef PS2_USE_BUSYWAIT | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 1 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#endif | |||
#endif |
@@ -1,56 +0,0 @@ | |||
/* | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6531 | |||
#define MANUFACTURER t.m.k. | |||
#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 102keys) | |||
#define DESCRIPTION USB converter for IBM Terminal Keyboard 102keys | |||
/* matrix size */ | |||
#define MATRIX_ROWS 17 // keycode bit: 3-0 | |||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \ | |||
) | |||
/* mouse keys */ | |||
#ifdef MOUSEKEY_ENABLE | |||
# define MOUSEKEY_DELAY_TIME 255 | |||
#endif | |||
/* PS/2 lines */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 1 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#endif |
@@ -1,56 +0,0 @@ | |||
/* | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6532 | |||
#define MANUFACTURER t.m.k. | |||
#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 122keys) | |||
#define DESCRIPTION USB converter for IBM Terminal Keyboard 122keys | |||
/* matrix size */ | |||
#define MATRIX_ROWS 17 // keycode bit: 3-0 | |||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \ | |||
) | |||
/* mouse keys */ | |||
#ifdef MOUSEKEY_ENABLE | |||
# define MOUSEKEY_DELAY_TIME 255 | |||
#endif | |||
/* PS/2 lines */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 1 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#endif |
@@ -28,7 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
/* | |||
* IBM Terminal keyboard 1392595(102keys) | |||
* IBM Terminal keyboard 6110345(122keys)/1392595(102keys) | |||
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M | |||
* http://www.seasip.info/VintagePC/ibm_1391406.html | |||
* | |||
@@ -114,6 +114,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | | |||
* `----' `---------------------------------------' `----' `-----------' `---------------' | |||
*/ | |||
/* | |||
KEYMAP( | |||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, | |||
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, | |||
@@ -124,6 +125,18 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT, | |||
RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO | |||
), | |||
*/ | |||
// pseudo ANSI | |||
KEYMAP( | |||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, | |||
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, | |||
PSCR,ESC, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, NO, DEL, END, PGDN, P7, P8, P9, PPLS, | |||
PAUS,INT5, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, UP, P4, P5, P6, PCMM, | |||
APP, INT6, LSFT,LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, NO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT, | |||
RGUI,LGUI, LCTL, LALT, SPC, LGUI, GRV, DOWN, NO, P0, PDOT,NO | |||
), | |||
}; | |||
@@ -1,208 +0,0 @@ | |||
/* | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/pgmspace.h> | |||
#include "keycode.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "keymap.h" | |||
/* | |||
* IBM Terminal keyboard 1392595(102keys) | |||
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M | |||
* http://www.seasip.info/VintagePC/ibm_1391406.html | |||
* | |||
* Keymap array: | |||
* 8 bytes | |||
* +---------+ | |||
* 0| | | |||
* :| | 0x00-0x87 | |||
* ;| | | |||
* 17| | | |||
* +---------+ | |||
*/ | |||
#define KEYMAP( \ | |||
K08, K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, K57,K5F,K62, \ | |||
\ | |||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \ | |||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \ | |||
K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K6B,K73,K74,K7B, \ | |||
K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K63, K69,K72,K7A,K79, \ | |||
K11, K19, K29, K39, K58, K61,K60,K6A, K68,K70,K71,K78 \ | |||
) { \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K07 }, \ | |||
{ KC_##K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K0D, KC_##K0E, KC_##K0F }, \ | |||
{ KC_NO, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ | |||
{ KC_NO, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ | |||
{ KC_NO, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ | |||
{ KC_NO, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ | |||
{ KC_NO, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ | |||
{ KC_NO, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \ | |||
{ KC_NO, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ | |||
{ KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \ | |||
{ KC_NO, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ | |||
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \ | |||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ | |||
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \ | |||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ | |||
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_##K84, KC_NO, KC_NO, KC_NO, }, \ | |||
} | |||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. | |||
static const uint8_t PROGMEM fn_layer[] = { | |||
1, // Fn0 | |||
2, // Fn1 | |||
3, // Fn2 | |||
0, // Fn3 | |||
0, // Fn4 | |||
0, // Fn5 | |||
0, // Fn6 | |||
0 // Fn7 | |||
}; | |||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. | |||
// See layer.c for details. | |||
static const uint8_t PROGMEM fn_keycode[] = { | |||
KC_SCLN, // Fn0 | |||
KC_SLSH, // Fn1 | |||
KC_ESC, // Fn2 | |||
KC_NO, // Fn3 | |||
KC_NO, // Fn4 | |||
KC_NO, // Fn5 | |||
KC_NO, // Fn6 | |||
KC_NO // Fn7 | |||
}; | |||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* 0: default | |||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. | |||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| | |||
* `---' `---------------' `---------------' `---------------' `-----------' | |||
* ,-----------------------------------------------------------. ,-----------. ,---------------. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -| | |||
* |-----------------------------------------------------------| |-----------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | | |||
* |-----------------------------------------------------------| `-----------' |-----------| +| | |||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| | | |||
* |-----------------------------------------------------------| ,---. |---------------| | |||
* |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | | |||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent| | |||
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | | |||
* `----' `---------------------------------------' `----' `-----------' `---------------' | |||
*/ | |||
KEYMAP( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, | |||
LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, NUHS,ENT, P4, P5, P6, PCMM, | |||
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, FN1, RO, FN2, UP, P1, P2, P3, PENT, | |||
LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO | |||
), | |||
/* 1: Mouse keys | |||
* ,-----------------------------------------------------------. | |||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| | |||
* |-----------------------------------------------------------| | |||
* |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \| | |||
* |-----------------------------------------------------------| | |||
* |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return | | |||
* |-----------------------------------------------------------| | |||
* |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl | |Alt | Mb1 |Alt | |Ctrl| | |||
* `-----' `--------------------------------------' `----' | |||
* Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button | |||
* Vo = Volume, Mut = Mute | |||
*/ | |||
KEYMAP( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, | |||
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, NO, ENT, P4, P5, P6, PCMM, | |||
LSFT,NO, VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, NO, RSFT, UP, P1, P2, P3, PENT, | |||
LGUI, LALT, BTN1, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO | |||
), | |||
/* 2: Cursor keys | |||
* ,-----------------------------------------------------------. | |||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| | |||
* |-----------------------------------------------------------| | |||
* |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \| | |||
* |-----------------------------------------------------------| | |||
* |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return | | |||
* |-----------------------------------------------------------| | |||
* |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl | |Alt | Space |Alt | |Ctrl| | |||
* `-----' `--------------------------------------' `----' | |||
*/ | |||
KEYMAP( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PMNS, | |||
LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, P4, P5, P6, PCMM, | |||
LSFT,NO, VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, NO, RSFT, UP, P1, P2, P3, PENT, | |||
LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO | |||
), | |||
/* 3: HHKB | |||
* ,-----------------------------------------------------------. | |||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||
* |-----------------------------------------------------------| | |||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| | |||
* |-----------------------------------------------------------| | |||
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | | |||
* |-----------------------------------------------------------| | |||
* |Shift | | | | | | +| -|End|PgD|Dow|Fn2 | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl | |Alt | Space |Alt | |Ctrl| | |||
* `-----' `--------------------------------------' `----' | |||
*/ | |||
KEYMAP( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, | |||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT, NO, ENT, P4, P5, P6, PCMM, | |||
LSFT,NO, NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN, NO, FN2, UP, P1, P2, P3, PENT, | |||
LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO | |||
), | |||
}; | |||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) | |||
{ | |||
return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); | |||
} | |||
uint8_t keymap_fn_layer(uint8_t index) | |||
{ | |||
return pgm_read_byte(&fn_layer[index]); | |||
} | |||
uint8_t keymap_fn_keycode(uint8_t index) | |||
{ | |||
return pgm_read_byte(&fn_keycode[index]); | |||
} |
@@ -66,20 +66,12 @@ uint8_t matrix_cols(void) | |||
void matrix_init(void) | |||
{ | |||
print_enable = true; | |||
debug_enable = true; | |||
//debug_matrix = true; | |||
//debug_keyboard = true; | |||
//debug_mouse = false; | |||
ps2_host_init(); | |||
// Make and Break code without Typematic | |||
while (ps2_host_send(0xF8) != 0xFA) { | |||
debug("send F8: failed\n"); | |||
_delay_ms(500); | |||
} | |||
debug("send F8: OK\n"); | |||
// initialize matrix state: all keys off | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; | |||
@@ -92,46 +84,90 @@ uint8_t matrix_scan(void) | |||
// scan code reading states | |||
static enum { | |||
INIT, | |||
RESET, | |||
RESET_RESPONSE, | |||
KBD_ID0, | |||
KBD_ID1, | |||
CONFIG, | |||
READY, | |||
F0, | |||
} state = INIT; | |||
} state = RESET; | |||
is_modified = false; | |||
uint8_t code; | |||
while ((code = ps2_host_recv())) { | |||
debug_hex(code); | |||
switch (state) { | |||
case INIT: | |||
switch (code) { | |||
case 0xF0: | |||
state = F0; | |||
debug(" "); | |||
break; | |||
default: // normal key make | |||
if (code < 0x88) { | |||
matrix_make(code); | |||
} else { | |||
debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n"); | |||
} | |||
state = INIT; | |||
debug("\n"); | |||
} | |||
break; | |||
case F0: // Break code | |||
switch (code) { | |||
default: | |||
if ((code = ps2_host_recv())) { | |||
debug("r"); debug_hex(code); debug(" "); | |||
} | |||
switch (state) { | |||
case RESET: | |||
debug("wFF "); | |||
if (ps2_host_send(0xFF) == 0xFA) { | |||
debug("[ack]\nRESET_RESPONSE: "); | |||
state = RESET_RESPONSE; | |||
} | |||
break; | |||
case RESET_RESPONSE: | |||
if (code == 0xAA) { | |||
debug("[ok]\nKBD_ID: "); | |||
state = KBD_ID0; | |||
} else if (code) { | |||
debug("err\nRESET: "); | |||
state = RESET; | |||
} | |||
break; | |||
// after reset receive keyboad ID(2 bytes) | |||
case KBD_ID0: | |||
if (code) { | |||
state = KBD_ID1; | |||
} | |||
break; | |||
case KBD_ID1: | |||
if (code) { | |||
debug("\nCONFIG: "); | |||
state = CONFIG; | |||
} | |||
break; | |||
case CONFIG: | |||
debug("wF8 "); | |||
if (ps2_host_send(0xF8) == 0xFA) { | |||
debug("[ack]\nREADY\n"); | |||
state = READY; | |||
} | |||
break; | |||
case READY: | |||
switch (code) { | |||
case 0x00: | |||
break; | |||
case 0xF0: | |||
state = F0; | |||
debug(" "); | |||
break; | |||
default: // normal key make | |||
if (code < 0x88) { | |||
matrix_make(code); | |||
} else { | |||
debug("unexpected scan code at READY: "); debug_hex(code); debug("\n"); | |||
} | |||
state = READY; | |||
debug("\n"); | |||
} | |||
break; | |||
case F0: // Break code | |||
switch (code) { | |||
case 0x00: | |||
break; | |||
default: | |||
if (code < 0x88) { | |||
matrix_break(code); | |||
} else { | |||
debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); | |||
} | |||
state = INIT; | |||
state = READY; | |||
debug("\n"); | |||
} | |||
break; | |||
} | |||
} | |||
break; | |||
} | |||
return 1; | |||
} |