12 years ago · 9addeae872
--- a/keymap.h
+++ b/keymap.h
@@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.

 #include <stdint.h>
 #include <stdbool.h>
 #include "usb_keycodes.h"


 /* keycode in specific layer */
--- a/layer.c
+++ b/layer.c
@@ -19,6 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 #include "host.h"
 #include "debug.h"
 #include "timer.h"
 #include "usb_keycodes.h"
 #include "layer.h"


--- a/ps2_usart.c
+++ b/ps2_usart.c
@@ -95,10 +95,8 @@ static inline uint16_t wait_data_lo(uint16_t us);
 static inline uint16_t wait_data_hi(uint16_t us);
 static inline void idle(void);
 static inline void inhibit(void);
 #if defined PS2_USE_INT || defined PS2_USE_USART
 static inline uint8_t pbuf_dequeue(void);
 static inline void pbuf_enqueue(uint8_t data);
 #endif


 void ps2_host_init(void)
--- a/ps2_usb/Makefile.pjrc_usart
+++ b/ps2_usb/Makefile.pjrc_usart
@@ -0,0 +1,56 @@
 #
 # Makefile for PJRC Teensy
 #


 # Target file name (without extension).
 TARGET = ps2_usb_pjrc_usart

 # Directory common source filess exist
 COMMON_DIR = ..

 # Directory keyboard dependent files exist
 TARGET_DIR = .

 # keyboard dependent files
 SRC = main.c \
 keymap.c \
 matrix.c \
 led.c \
 ps2_usart.c

 CONFIG_H = config_pjrc_usart.h


 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
 #MCU = at90usb162 # Teensy 1.0
 MCU = atmega32u4 # Teensy 2.0
 #MCU = at90usb646 # Teensy++ 1.0
 #MCU = at90usb1286 # Teensy++ 2.0


 # Processor frequency.
 # Normally the first thing your program should do is set the clock prescaler,
 # so your program will run at the correct speed. You should also set this
 # variable to same clock speed. The _delay_ms() macro uses this, and many
 # examples use this variable to calculate timings. Do not add a "UL" here.
 F_CPU = 16000000


 # Build Options
 # *Comment out* to disable the options.
 #
 MOUSEKEY_ENABLE = yes # Mouse keys
 EXTRAKEY_ENABLE = yes # Audio control and System control
 NKRO_ENABLE = yes # USB Nkey Rollover



 #---------------- Programming Options --------------------------
 PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex



 include $(COMMON_DIR)/pjrc.mk
 include $(COMMON_DIR)/common.mk
--- a/ps2_usb/README
+++ b/ps2_usb/README
@@ -1,40 +1,56 @@
 PS/2 to USB keyboard converter
 ==============================
 This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2.
 This will works on USB AVR(ATMega32U4, AT90USB) or V-USB.


 Features
 --------
 Mouse keys
 You can emulates mouse move and button click using keyboard.

 System/Media control
 You can sends Power event, Volume down/up and Mute.

 USB NKRO(actually 120KRO+8Modifiers)
 You can tolggles NKRO feature.

 Keymap customization
 You can customize keymaps easily by editing source code. See keymap.c.


 PS/2 signal handling implementations
 ------------------------------------
 Following three methods are used to implement PS/2 signal handling.
 a. Simple and stupid wait & read loop(intensive use of cycles)
 This is implemented with (expected) portable C code for reference. See ps2.c.
 b. Interrupt driven
 See ps2_intr.c
 c. Using USART hardware module(no cycle needed)
 This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter.
 See ps2_usart.c.


 Build Converter
 ---------------
 0. Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock).
 By default Clock is on PF0 and Data on PF1.
 You can change this pin configuration by editing config_pjrc.h.
 In this photo Vcc is yellow, GND is green, Data is red and Clock is black.
 http://img17.imageshack.us/img17/7243/201101181933.jpg
 Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock).
 For a. Simple and stupid and b. Interrupt implementaion:
 By default Clock is on PF0 and Data on PF1.
 You can change this pin configuration by editing config_pjrc.h.
 In this photo Vcc is yellow, GND is green, Data is red and Clock is black.
 http://img17.imageshack.us/img17/7243/201101181933.jpg
 For c. USART implementation:
 In case of Teensny(ATMega32u4) CLock is on PD2 and Data on PD5.


 Build Frimware
 --------------
 1. Edit Makefile for build options and MCU setting.
 Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
  Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
 2. make
 Just type 'make' in a terminal.
 Just type 'make' in a terminal.
 Use '-f Makefile.pjrc_intr' option to use b. Interrupt.
 Use '-f Makefile.pjrc_usart' option to use c. USART.
 Use '-f Makefile.vusb' option to build V-USB converter.
 3. program with Teensy Loader.
 http://www.pjrc.com/teensy/loader.html
  http://www.pjrc.com/teensy/loader.html


 Demonstration of Features
@@ -97,34 +113,4 @@ To define keymap layer switching may needs a bit of your effort at this time.
 ),


 Multimedia keys
 ---------------
 Following lists PS/2 special keys supported by Windows.
 http://msdn.microsoft.com/en-us/windows/hardware/gg463372.aspx

 Key PS/2(Set2) HID
 ---------------------------------------------------
 System Power E0 37 01 0081
 System Sleep E0 3F 01 0082
 System Wake E0 5E 01 0083
 System Mute E0 23 0C 00E2
 Volume Up E0 32 0C 00E9
 Volume Down E0 21 0C 00EA
 Scan Next Track E0 4D 0C 00B5
 Scan Previous Track E0 15 0C 00B6
 Stop E0 3B 0C 00B7
 Play/Pause E0 34 0C 00CD
 Media Select E0 50 0C 0183
 Mail E0 48 0C 018A
 Calculator E0 2B 0C 0192
 My Computer E0 40 0C 0194
 WWW Search E0 10 0C 0221
 WWW Home E0 3A 0C 0223
 WWW Back E0 38 0C 0224
 WWW Forward E0 30 0C 0225
 WWW Stop E0 28 0C 0226
 WWW Refresh E0 20 0C 0227
 WWW Favorites E0 18 0C 022A


 EOF
--- a/ps2_usb/config_pjrc_usart.h
+++ b/ps2_usb/config_pjrc_usart.h
@@ -0,0 +1,91 @@
 /*
 Copyright 2012 Jun Wako <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 #ifndef CONFIG_H
 #define CONFIG_H

 /* controller configuration */
 #include "controller_teensy.h"

 #define VENDOR_ID 0xFEED
 #define PRODUCT_ID 0x6513
 #define MANUFACTURER t.m.k.
 #define PRODUCT PS/2 keyboard converter(USART)
 #define DESCRIPTION convert PS/2 keyboard to USB


 /* matrix size */
 #define MATRIX_ROWS 32 // keycode bit: 3-0
 #define MATRIX_COLS 8 // keycode bit: 6-4


 /* key combination for command */
 #define IS_COMMAND() ( \
 keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
 keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
 )


 /* mouse keys */
 #ifdef MOUSEKEY_ENABLE
 # define MOUSEKEY_DELAY_TIME 255
 #endif


 /* PS/2 lines */
 #define PS2_CLOCK_PORT PORTF
 #define PS2_CLOCK_PIN PINF
 #define PS2_CLOCK_DDR DDRF
 #define PS2_CLOCK_BIT 5
 #define PS2_DATA_PORT PORTF
 #define PS2_DATA_PIN PINF
 #define PS2_DATA_DDR DDRF
 #define PS2_DATA_BIT 2


 // synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
 // set DDR of CLOCK as input to be slave
 #define PS2_USART_INIT() do { \
 PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
 PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
 UCSR1C = ((1 << UMSEL10) | \
 (3 << UPM10) | \
 (0 << USBS1) | \
 (3 << UCSZ10) | \
 (0 << UCPOL1)); \
 UCSR1A = 0; \
 UBRR1H = 0; \
 UBRR1L = 0; \
 } while (0)
 #define PS2_USART_RX_INT_ON() do { \
 UCSR1B = ((1 << RXCIE1) | \
 (1 << RXEN1)); \
 } while (0)
 #define PS2_USART_RX_POLL_ON() do { \
 UCSR1B = (1 << RXEN1); \
 } while (0)
 #define PS2_USART_OFF() do { \
 UCSR1C = 0; \
 UCSR1B &= ~((1 << RXEN1) | \
 (1 << TXEN1)); \
 } while (0)
 #define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
 #define PS2_USART_RX_DATA UDR1
 #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
 #define PS2_USART_RX_VECT USART1_RX_vect

 #endif