@@ -1,31 +1,41 @@ | |||
# Target file name (without extension). | |||
TARGET = m0110_lufa | |||
TARGET ?= m0110_lufa | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
TMK_DIR ?= ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
TARGET_DIR ?= . | |||
# keyboard dependent files | |||
SRC = matrix.c \ | |||
SRC ?= matrix.c \ | |||
led.c \ | |||
m0110.c | |||
# To use own keymap file run make like: make keymap=hasu | |||
# | |||
# Keymap file | |||
# | |||
ifdef UNIMAP_ENABLE | |||
KEYMAP_FILE = unimap | |||
else | |||
ifdef ACTIONMAP_ENABLE | |||
KEYMAP_FILE = actionmap | |||
else | |||
KEYMAP_FILE = keymap | |||
endif | |||
endif | |||
ifdef KEYMAP | |||
SRC += keymap_$(KEYMAP).c | |||
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC) | |||
else | |||
SRC += keymap_default.c | |||
SRC := $(KEYMAP_FILE).c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
CONFIG_H ?= config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
MCU = atmega32u2 # TMK converter rev2 | |||
#MCU = atmega32u4 # TMK converter rev1 | |||
MCU ?= atmega32u2 | |||
# Processor frequency. | |||
@@ -33,14 +43,14 @@ MCU = atmega32u2 # TMK converter rev2 | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
F_CPU ?= 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
ARCH ?= AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
@@ -53,7 +63,7 @@ ARCH = AVR8 | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
F_USB ?= $(F_CPU) | |||
# Interrupt driven control endpoint task | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
@@ -69,19 +79,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# *Comment out* to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor | |||
#BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE ?= yes # Console for debug(+400) | |||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA | |||
#KEYMAP_SECTION_ENABLE ?= yes # fixed address keymap for keymap editor | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
PROGRAM_CMD ?= teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path |
@@ -0,0 +1,3 @@ | |||
TARGET = m0110_rev1 | |||
MCU = atmega32u4 | |||
include Makefile |
@@ -0,0 +1,3 @@ | |||
TARGET = m0110_rev2 | |||
MCU = atmega32u2 | |||
include Makefile |
@@ -1,97 +0,0 @@ | |||
# Target file name (without extension). | |||
TARGET = m0110_lufa | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = matrix.c \ | |||
led.c \ | |||
m0110.c | |||
# To use own keymap file run make like: make keymap=hasu | |||
ifdef KEYMAP | |||
SRC += keymap_$(KEYMAP).c | |||
else | |||
SRC += keymap_default.c | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
#MCU = at90usb162 # Teensy 1.0 | |||
MCU = atmega32u4 # Teensy 2.0 | |||
#MCU = at90usb646 # Teensy++ 1.0 | |||
#MCU = at90usb1286 # Teensy++ 2.0 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in bytes | |||
# Teensy halfKay 512 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=512 | |||
# Build Options | |||
# *Comment out* to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol/lufa.mk | |||
include $(TMK_DIR)/protocol.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -1,95 +0,0 @@ | |||
# Target file name (without extension). | |||
TARGET = m0110_lufa | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = matrix.c \ | |||
led.c \ | |||
m0110.c | |||
# To use own keymap file run make like: make keymap=hasu | |||
ifdef KEYMAP | |||
SRC += keymap_$(KEYMAP).c | |||
else | |||
SRC += keymap_default.c | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
#MCU = atmega32u2 # TMK converter rev2 | |||
MCU = atmega32u4 # TMK converter rev1 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in bytes | |||
# Teensy halfKay 512 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# *Comment out* to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol/lufa.mk | |||
include $(TMK_DIR)/protocol.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -1,95 +0,0 @@ | |||
# Target file name (without extension). | |||
TARGET = m0110_lufa | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = matrix.c \ | |||
led.c \ | |||
m0110.c | |||
# To use own keymap file run make like: make keymap=hasu | |||
ifdef KEYMAP | |||
SRC += keymap_$(KEYMAP).c | |||
else | |||
SRC += keymap_default.c | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
MCU = atmega32u2 # TMK converter rev2 | |||
#MCU = atmega32u4 # TMK converter rev1 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in bytes | |||
# Teensy halfKay 512 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# *Comment out* to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol/lufa.mk | |||
include $(TMK_DIR)/protocol.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -0,0 +1,6 @@ | |||
TARGET = m0110_rev1_unimap | |||
UNIMAP_ENABLE = yes | |||
KEYMAP_SECTION_ENABLE = yes | |||
MCU = atmega32u4 | |||
#OPT_DEFS = -DM0110_INTL | |||
include Makefile |
@@ -0,0 +1,6 @@ | |||
TARGET = m0110_rev2_unimap | |||
UNIMAP_ENABLE = yes | |||
KEYMAP_SECTION_ENABLE = yes | |||
MCU = atmega32u2 | |||
#OPT_DEFS = -DM0110_INTL | |||
include Makefile |
@@ -4,7 +4,7 @@ This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M01 | |||
Read README of top directory too. | |||
Pictures of **M0110 + M0120** and **M0110A**. | |||
Pictures of **M0110 + M0120** and **M0110A** with [TMK converter]. | |||
![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg) | |||
![M0110A](http://i.imgur.com/HuHOEoHm.jpg) | |||
@@ -21,25 +21,25 @@ Update | |||
- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. | |||
- 2014/06: Change keymaps | |||
- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c) | |||
- 2016/09: Unimap support - keymap editor on web browser | |||
Building Hardware | |||
----------------- | |||
You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. | |||
Hardware | |||
-------- | |||
You can buy preassembled [TMK converter] or make yourown with AVR dev board like PJRC [Teensy]. | |||
Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. | |||
[![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg) | |||
[![M0110 Converter](http://i.imgur.com/yEp2eRim.jpg)](http://i.imgur.com/yEp2eRi.jpg) | |||
### 4P4C phone handset cable | |||
Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. | |||
<http://en.wikipedia.org/wiki/Modular_connector#4P4C> | |||
Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. | |||
[![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1) | |||
[Teensy]: http://www.pjrc.com/teensy/ | |||
[TMK converter]: https://github.com/tmk/keyboard_converter | |||
[TMK converter]: https://geekhack.org/index.php?topic=72052.0 | |||
### Socket Pinout | |||
@@ -60,16 +60,19 @@ To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to | |||
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source) | |||
$ cd m0110_usb | |||
$ make -f Makefile.rev2 clean | |||
$ make -f Makefile.rev2 [KEYMAP={default|intl|spacefn|hasu}] | |||
$ make -f Makefile.rev2 [KEYMAP={intl|spacefn}] | |||
Use `Maefile.tmk_rev1` for TMK converter Rev.1, `Makefile.teensy` for Teensy instead. | |||
Use `Maefile.rev1` for TMK converter rev.1 and Teensy(ATMega32u4), instead. | |||
Keymap | |||
------ | |||
To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. | |||
To create your own keymap copy existent keymap file to `keymap_<name>.c` and edit it. You can build with `make -f Makfile.rev2 KEYMAP=<name>`. | |||
Or you can edit keymap on web browser and download firmware. | |||
http://www.tmk-kbd.com/tmk_keyboard/editor/ | |||
Debug |
@@ -40,7 +40,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
* ,---------------------------------------------------------. ,---------------. | |||
* | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E| | |||
* | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E| | |||
* |-----------------------------------------------------' | |---------------| | |||
* | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| | |||
* |---------------------------------------------------------| |---------------| | |||
@@ -53,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
* ,---------------------------------------------------------. ,---------------. | |||
* | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| | |||
* | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| | |||
* |---------------------------------------------------------| |---------------| | |||
@@ -94,7 +94,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
* ,---------------------------------------------------------. ,---------------. | |||
* | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| | |||
* | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| | |||
* |------------------------------------------------------, | |---------------| | |||
* | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | | 56| 57| 58| 66| | |||
* |---------------------------------------------------------| |---------------| |
@@ -1,87 +0,0 @@ | |||
/* | |||
Copyright 2014 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include "keycode.h" | |||
#include "keymap_common.h" | |||
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Default: | |||
* M0110 | |||
* ,---------------------------------------------------------. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| | |||
* |---------------------------------------------------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | |||
* |---------------------------------------------------------| | |||
* |Ctrl | A| S| D| F| G| H| J| K| L| Fn| '|Return| | |||
* |---------------------------------------------------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| Fn|Shift | | |||
* `---------------------------------------------------------' | |||
* |Fn |alt | Fn |Gui |Fn | | |||
* `-----------------------------------------------' | |||
*/ | |||
[0] = KEYMAP( | |||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST, | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, | |||
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT, ENT, P4, P5, P6, PPLS, | |||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, UP, P1, P2, P3, PENT, | |||
FN0, LALT, FN2, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT | |||
), | |||
// IJKL cursor | |||
[1] = KEYMAP( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, | |||
CAPS,NO, NO, NO, NO, NO, HOME,PGDN,UP, PGUP,END, NO, NO, P7, P8, P9, PMNS, | |||
LCTL,VOLD,VOLU,MUTE,NO, NO, HOME,LEFT,DOWN,RGHT,END, NO, ENT, P4, P5, P6, PPLS, | |||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, PGUP, P1, P2, P3, PENT, | |||
TRNS,LALT, SPC, LGUI,BSLS,HOME,END, PGDN, P0, PDOT | |||
), | |||
// HJKL cursor | |||
[2] = KEYMAP( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, | |||
CAPS,NO, NO, NO, NO, NO, HOME,PGDN,UP, PGUP,END, NO, NO, P7, P8, P9, PMNS, | |||
LCTL,VOLD,VOLU,MUTE,NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, | |||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS, PGUP, P1, P2, P3, PENT, | |||
TRNS,LALT, SPC, LGUI,BSLS,HOME,END, PGDN, P0, PDOT | |||
), | |||
// Mousekey | |||
[3] = KEYMAP( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, | |||
CAPS,Q, W, E, R, T, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD, P7, P8, P9, PMNS, | |||
LCTL,VOLD,VOLU,MUTE,NO, NO, BTN2,MS_L,MS_D,MS_R,BTN1,NO, ENT, P4, P5, P6, PPLS, | |||
LSFT,Z, X, C, V, B, BTN2,BTN1,BTN4,BTN5,NO, PGUP, P1, P2, P3, PENT, | |||
NO, LALT, TRNS, LGUI,BSLS,HOME,END, PGDN, P0, PDOT | |||
), | |||
// Mousekey | |||
[4] = KEYMAP( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, | |||
CAPS,Q, W, E, R, T, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD, P7, P8, P9, PMNS, | |||
LCTL,VOLD,VOLU,MUTE,NO, NO, BTN2,MS_L,MS_D,MS_R,TRNS,NO, ENT, P4, P5, P6, PPLS, | |||
LSFT,Z, X, C, V, B, BTN2,BTN1,BTN4,BTN5,NO, PGUP, P1, P2, P3, PENT, | |||
NO, LALT, BTN1, LGUI,BSLS,HOME,END, PGDN, P0, PDOT | |||
), | |||
}; | |||
/* | |||
* Fn action definition | |||
*/ | |||
const action_t fn_actions[] PROGMEM = { | |||
[0] = ACTION_LAYER_MOMENTARY(1), | |||
[1] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), | |||
[2] = ACTION_LAYER_TAP_KEY(3, KC_SPACE), | |||
[3] = ACTION_LAYER_TAP_KEY(4, KC_SCOLON), | |||
}; |
@@ -0,0 +1,48 @@ | |||
/* | |||
Copyright 2016 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "unimap_trans.h" | |||
#define AC_FN0 ACTION_LAYER_MOMENTARY(1) | |||
#define AC_FN1 ACTION_LAYER_TAP_KEY(1, KC_BSLS) | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] __attribute__ ((section (".keymap.keymaps"))) = { | |||
#else | |||
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] PROGMEM = { | |||
#endif | |||
UNIMAP( | |||
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, | |||
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NO, BSPC, NO, NO, NO, NLCK,PEQL,PSLS,PAST, | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, FN1, NO, NO, NO, P7, P8, P9, PMNS, | |||
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PPLS, | |||
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, NO, NO, UP, P1, P2, P3, NO, | |||
NO, LGUI,LALT,NO, SPC, NO, NO, NO, FN0, NO, NO, LEFT,DOWN,RGHT, P0, PDOT,PENT | |||
), | |||
UNIMAP( | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
NO, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,UP, INS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,LEFT,RGHT, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,END, PGDN,DOWN, TRNS,TRNS, PGUP, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, HOME,PGDN,END, TRNS, TRNS,TRNS | |||
), | |||
}; | |||
@@ -0,0 +1,244 @@ | |||
/* | |||
Copyright 2016 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef UNIMAP_COMMON_H | |||
#define UNIMAP_COMMON_H | |||
#include <stdint.h> | |||
#include <avr/pgmspace.h> | |||
#include "unimap.h" | |||
/* M0110A scan codes | |||
* ,---------------------------------------------------------. ,---------------. | |||
* | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E| | |||
* |-----------------------------------------------------' | |---------------| | |||
* | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| | | |||
* `---------------------------------------------------------' |-----------| 4C| | |||
* | 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| | | |||
* `---------------------------------------------------------' `---------------' | |||
* | |||
* M0110 + M0120 scan codes | |||
* ,---------------------------------------------------------. ,---------------. | |||
* | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| | |||
* |---------------------------------------------------------| |---------------| | |||
* | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| | 53| 54| 55| | | |||
* `---------------------------------------------------------' |-----------| 4C| | |||
* | 3A| 37| 31 | 34| 3A| | 52| 41| | | |||
* `------------------------------------------------' `---------------' | |||
* | |||
* International M0110 | |||
* https://en.wikipedia.org/wiki/File:Apple_Macintosh_Plus_Keyboard.jpg | |||
* Probably International keyboard layout of M0110A doesn't exist. | |||
* ,---------------------------------------------------------. | |||
* | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | |||
* |---------------------------------------------------------| | |||
* | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | |||
* |------------------------------------------------------, | | |||
* | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | | |||
* |---------------------------------------------------------| | |||
* | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| | |||
* `---------------------------------------------------------' | |||
* | 3A| 37| 34 | 31| 3A| | |||
* `------------------------------------------------' | |||
*/ | |||
const uint8_t PROGMEM unimap_trans[MATRIX_ROWS][MATRIX_COLS] = { | |||
// Position(unimap) scan code(matrix) | |||
// --------------------------------------------- | |||
{ | |||
UNIMAP_A, // 0x00 | |||
UNIMAP_S, // 0x01 | |||
UNIMAP_D, // 0x02 | |||
UNIMAP_F, // 0x03 | |||
UNIMAP_H, // 0x04 | |||
UNIMAP_G, // 0x05 | |||
#ifdef M0110_INTL | |||
UNIMAP_NONUS_BSLASH, // 0x06 | |||
UNIMAP_Z, // 0x07 | |||
}, | |||
{ | |||
UNIMAP_X, // 0x08 | |||
UNIMAP_C, // 0x09 | |||
UNIMAP_SLASH, // 0x0A | |||
UNIMAP_V, // 0x0B | |||
#else | |||
UNIMAP_Z, // 0x06 | |||
UNIMAP_X, // 0x07 | |||
}, | |||
{ | |||
UNIMAP_C, // 0x08 | |||
UNIMAP_V, // 0x09 | |||
UNIMAP_NO, // 0x0A | |||
UNIMAP_B, // 0x0B | |||
#endif | |||
UNIMAP_Q, // 0x0C | |||
UNIMAP_W, // 0x0D | |||
UNIMAP_E, // 0x0E | |||
UNIMAP_R, // 0x0F | |||
}, | |||
{ | |||
UNIMAP_Y, // 0x10 | |||
UNIMAP_T, // 0x11 | |||
UNIMAP_1, // 0x12 | |||
UNIMAP_2, // 0x13 | |||
UNIMAP_3, // 0x14 | |||
UNIMAP_4, // 0x15 | |||
UNIMAP_6, // 0x16 | |||
UNIMAP_5, // 0x17 | |||
}, | |||
{ | |||
UNIMAP_EQUAL, // 0x18 | |||
UNIMAP_9, // 0x19 | |||
UNIMAP_7, // 0x1A | |||
UNIMAP_MINUS, // 0x1B | |||
UNIMAP_8, // 0x1C | |||
UNIMAP_0, // 0x1D | |||
UNIMAP_RBRACKET, // 0x1E | |||
UNIMAP_O, // 0x1F | |||
}, | |||
{ | |||
UNIMAP_U, // 0x20 | |||
UNIMAP_LBRACKET, // 0x21 | |||
UNIMAP_I, // 0x22 | |||
UNIMAP_P, // 0x23 | |||
#ifdef M0110_INTL | |||
UNIMAP_NONUS_HASH, // 0x24 | |||
#else | |||
UNIMAP_ENTER, // 0x24 | |||
#endif | |||
UNIMAP_L, // 0x25 | |||
UNIMAP_J, // 0x26 | |||
UNIMAP_QUOTE, // 0x27 | |||
}, | |||
{ | |||
UNIMAP_K, // 0x28 | |||
UNIMAP_SCOLON, // 0x29 | |||
#ifdef M0110_INTL | |||
UNIMAP_ENTER, // 0x2A | |||
UNIMAP_M, // 0x2B | |||
UNIMAP_DOT, // 0x2C | |||
UNIMAP_B, // 0x2D | |||
UNIMAP_N, // 0x2E | |||
UNIMAP_COMMA, // 0x2F | |||
#else | |||
UNIMAP_BSLASH, // 0x2A | |||
UNIMAP_COMMA, // 0x2B | |||
UNIMAP_SLASH, // 0x2C | |||
UNIMAP_N, // 0x2D | |||
UNIMAP_M, // 0x2E | |||
UNIMAP_DOT, // 0x2F | |||
#endif | |||
}, | |||
{ | |||
UNIMAP_TAB, // 0x30 | |||
#ifdef M0110_INTL | |||
UNIMAP_RGUI, // 0x31 | |||
#else | |||
UNIMAP_SPACE, // 0x31 | |||
#endif | |||
UNIMAP_GRAVE, // 0x32 | |||
UNIMAP_BSPACE, // 0x33 | |||
#ifdef M0110_INTL | |||
UNIMAP_SPACE, // 0x34 | |||
#else | |||
UNIMAP_RGUI, // 0x34 | |||
#endif | |||
UNIMAP_NO, // 0x35 | |||
UNIMAP_NO, // 0x36 | |||
UNIMAP_LGUI, // 0x37 | |||
}, | |||
{ | |||
UNIMAP_LSHIFT, // 0x38 | |||
UNIMAP_CAPSLOCK, // 0x39 | |||
UNIMAP_LALT, // 0x3A | |||
UNIMAP_NO, // 0x3B | |||
UNIMAP_NO, // 0x3C | |||
UNIMAP_NO, // 0x3D | |||
UNIMAP_NO, // 0x3E | |||
UNIMAP_NO, // 0x3F | |||
}, | |||
{ | |||
UNIMAP_NO, // 0x40 | |||
UNIMAP_KP_DOT, // 0x41 | |||
UNIMAP_RIGHT, // 0x42 | |||
UNIMAP_NO, // 0x43 | |||
UNIMAP_NO, // 0x44 | |||
UNIMAP_NO, // 0x45 | |||
UNIMAP_LEFT, // 0x46 | |||
UNIMAP_NUMLOCK, // 0x47 | |||
}, | |||
{ | |||
UNIMAP_DOWN, // 0x48 | |||
UNIMAP_NO, // 0x49 | |||
UNIMAP_NO, // 0x4A | |||
UNIMAP_NO, // 0x4B | |||
UNIMAP_KP_ENTER, // 0x4C | |||
UNIMAP_UP, // 0x4D | |||
UNIMAP_KP_PLUS, // 0x4E keypad minus | |||
UNIMAP_NO, // 0x4F | |||
}, | |||
{ | |||
UNIMAP_NO, // 0x50 | |||
UNIMAP_NO, // 0x51 | |||
UNIMAP_KP_0, // 0x52 | |||
UNIMAP_KP_1, // 0x53 | |||
UNIMAP_KP_2, // 0x54 | |||
UNIMAP_KP_3, // 0x55 | |||
UNIMAP_KP_4, // 0x56 | |||
UNIMAP_KP_5, // 0x57 | |||
}, | |||
{ | |||
UNIMAP_KP_6, // 0x58 | |||
UNIMAP_KP_7, // 0x59 | |||
UNIMAP_NO, // 0x5A | |||
UNIMAP_KP_8, // 0x5B | |||
UNIMAP_KP_9, // 0x5C | |||
UNIMAP_NO, // 0x5D | |||
UNIMAP_NO, // 0x5E | |||
UNIMAP_NO, // 0x5F | |||
}, | |||
{ | |||
UNIMAP_NO, // 0x60 | |||
UNIMAP_NO, // 0x61 | |||
UNIMAP_KP_MINUS, // 0x62 keypad asterisk | |||
UNIMAP_NO, // 0x63 | |||
UNIMAP_NO, // 0x64 | |||
UNIMAP_NO, // 0x65 | |||
UNIMAP_KP_COMMA, // 0x66 | |||
UNIMAP_NO, // 0x67 | |||
}, | |||
{ | |||
UNIMAP_KP_SLASH, // 0x68 keypad equal | |||
UNIMAP_NO, // 0x69 | |||
UNIMAP_NO, // 0x6A | |||
UNIMAP_NO, // 0x6B | |||
UNIMAP_NO, // 0x6C | |||
UNIMAP_KP_ASTERISK, // 0x6D keypad slash | |||
UNIMAP_NO, // 0x6E compose | |||
UNIMAP_NO, // 0x6F | |||
}, | |||
}; | |||
#endif | |||