Browse Source

Add files via upload

master
di0ib 2 years ago
parent
commit
9c5db97f32

+ 135
- 0
keyboard/unquadquadium/Makefile View File

@@ -0,0 +1,135 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = unquadquadium
# Directory common source filess exist
TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
# project specific files
SRC = matrix.c \
led.c
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := actionmap_144.c $(SRC)
endif
CONFIG_H = config.h
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
ACTIONMAP_ENABLE = yes # Use 16bit action codes in keymap instead of 8bit keycodes
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

+ 36
- 0
keyboard/unquadquadium/actionmap_144.c View File

@@ -0,0 +1,36 @@
#include "actionmap.h"
#include "action_code.h"
#include "actionmap_common.h"
/*
* Actions
*/
const action_t PROGMEM actionmaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = ACTIONMAP( \
EQL, BSPC, BSPC, 3, BSLS, GRV, ENT, ENT, PGUP, RSFT, UP, PGDN,
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,
CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
LCTL, LGUI, LALT, APP, SPC, SPC, SPC, SPC, X, RALT, RGUI, RCTL,
EQL, BSPC, BSPC, 3, BSLS, GRV, ENT, ENT, PGUP, RSFT, UP, PGDN,
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,
CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,
LCTL, LGUI, LALT, APP, SPC, SPC, SPC, SPC, X, RALT, RGUI, RCTL),
[1] = ACTIONMAP( \
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
};

+ 49
- 0
keyboard/unquadquadium/actionmap_common.h View File

@@ -0,0 +1,49 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef ACTIONMAP_COMMON_H
#define ACTIONMAP_COMMON_H
/* keymap definition macro */
#define ACTIONMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, \
K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, \
K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, \
K70, K71, K72, K73, K74, K75, K76, K77, K78, K79, K7A, K7B, \
K80, K81, K82, K83, K84, K85, K86, K87, K88, K89, K8A, K8B, \
K90, K91, K92, K93, K94, K95, K96, K97, K98, K99, K9A, K9B, \
KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, KA9, KAA, KAB, \
KB0, KB1, KB2, KB3, KB4, KB5, KB6, KB7, KB8, KB9, KBA, KBB \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B }, \
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59, KC_##K5A, KC_##K5B }, \
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, KC_##K69, KC_##K6A, KC_##K6B }, \
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, KC_##K78, KC_##K79, KC_##K7A, KC_##K7B }, \
{ KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_##K87, KC_##K88, KC_##K89, KC_##K8A, KC_##K8B }, \
{ KC_##K90, KC_##K91, KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_##K97, KC_##K98, KC_##K99, KC_##K9A, KC_##K9B }, \
{ KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7, KC_##KA8, KC_##KA9, KC_##KAA, KC_##KAB }, \
{ KC_##KB0, KC_##KB1, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_##KB7, KC_##KB8, KC_##KB9, KC_##KBA, KC_##KBB } \
}
#endif

+ 68
- 0
keyboard/unquadquadium/config.h View File

@@ -0,0 +1,68 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0A0C
#define DEVICE_VER 0x0144
#define MANUFACTURER di0ib
#define PRODUCT The unquadquadium Keyboard
#define DESCRIPTION A 144 key keyboard
/* key matrix size */
#define MATRIX_ROWS 12
#define MATRIX_COLS 12
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

+ 34
- 0
keyboard/unquadquadium/led.c View File

@@ -0,0 +1,34 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output low
DDRD |= (1<<5);
PORTD &= ~(1<<5);
} else {
// Hi-Z
DDRD &= ~(1<<5);
PORTD &= ~(1<<5);
}
}

+ 248
- 0
keyboard/unquadquadium/matrix.c View File

@@ -0,0 +1,248 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11
* pin: B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1
*/
static void init_cols(void)
{
// Input with pull-up(DDR:0, PORT:1)
DDRB &= ~(1<<1 | 1<<3 | 1<<5 | 1<<6 | 1<<7);
PORTB |= (1<<1 | 1<<3 | 1<<5 | 1<<6 | 1<<7);
DDRD &= ~(1<<6);
PORTD |= (1<<6);
DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
}
static matrix_row_t read_cols(void)
{
return (PINB&(1<<5) ? 0 : (1<<0)) |
(PINB&(1<<6) ? 0 : (1<<1)) |
(PINB&(1<<7) ? 0 : (1<<2)) |
(PIND&(1<<6) ? 0 : (1<<3)) |
(PINF&(1<<7) ? 0 : (1<<4)) |
(PINF&(1<<6) ? 0 : (1<<5)) |
(PINF&(1<<5) ? 0 : (1<<6)) |
(PINF&(1<<4) ? 0 : (1<<7)) |
(PINF&(1<<1) ? 0 : (1<<8)) |
(PINF&(1<<0) ? 0 : (1<<9)) |
(PINB&(1<<3) ? 0 : (1<<10)) |
(PINB&(1<<1) ? 0 : (1<<11));
}
/* Row pin configuration
* row: 0 1 2 3 4 5 6 7 8 9 10 11
* pin: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, C7
*/
static void unselect_rows(void)
{
// Hi-Z(DDR:0, PORT:0) to unselect
DDRB &= ~0b00010101;
PORTB &= ~0b00010101;
DDRC &= ~0b11000000;
PORTC &= ~0b11000000;
DDRD &= ~0b10011111;
PORTD &= ~0b10011111;
DDRE &= ~0b01000000;
PORTE &= ~0b01000000;
}
static void select_row(uint8_t row)
{
// Output low(DDR:1, PORT:0) to select
switch (row) {
case 0:
DDRB |= (1<<2);
PORTB &= ~(1<<2);
break;
case 1:
DDRB |= (1<<0);
PORTB &= ~(1<<0);
break;
case 2:
DDRD |= (1<<3);
PORTD &= ~(1<<3);
break;
case 3:
DDRD |= (1<<2);
PORTD &= ~(1<<2);
break;
case 4:
DDRD |= (1<<1);
PORTD &= ~(1<<1);
break;
case 5:
DDRD |= (1<<0);
PORTD &= ~(1<<0);
break;
case 6:
DDRD |= (1<<4);
PORTD &= ~(1<<4);
break;
case 7:
DDRC |= (1<<6);
PORTC &= ~(1<<6);
break;
case 8:
DDRD |= (1<<7);
PORTD &= ~(1<<7);
break;
case 9:
DDRE |= (1<<6);
PORTE &= ~(1<<6);
break;
case 10:
DDRB |= (1<<4);
PORTB &= ~(1<<4);
break;
case 11:
DDRC |= (1<<7);
PORTC &= ~(1<<7);
break;
}
}

Loading…
Cancel
Save