Upload files to 'keyboard/toshi'
This commit is contained in:
parent
d8eb05ccac
commit
a195f44349
136
keyboard/toshi/Makefile
Normal file
136
keyboard/toshi/Makefile
Normal file
@ -0,0 +1,136 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET =
toshi
|
||||
|
||||
# Directory common source filess exist
|
||||
TMK_DIR = ../../tmk_core
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c \
|
||||
rgblight.c \
|
||||
light_ws2812.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymap_toshi.c $(SRC)
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TMK_DIR)
|
||||
|
||||
include $(TMK_DIR)/protocol/lufa.mk
|
||||
include $(TMK_DIR)/common.mk
|
||||
include $(TMK_DIR)/rules.mk
|
||||
83
keyboard/toshi/config.h
Normal file
83
keyboard/toshi/config.h
Normal file
@ -0,0 +1,83 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0A0C
|
||||
#define DEVICE_VER 0x02D2
|
||||
#define MANUFACTURER di0ib
|
||||
#define PRODUCT The TOSHI Keyboard
|
||||
#define DESCRIPTION A keyboard with power converters
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* ws2812 RGB LED */
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
#define ws2812_pin PD3
|
||||
#define RGBLED_NUM 7 // Number of LEDs
|
||||
#ifndef RGBLIGHT_HUE_STEP
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#endif
|
||||
#ifndef RGBLIGHT_SAT_STEP
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#endif
|
||||
#ifndef RGBLIGHT_VAL_STEP
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
215
keyboard/toshi/matrix.c
Normal file
215
keyboard/toshi/matrix.c
Normal file
@ -0,0 +1,215 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
* scan matrix
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "rgblight.h"
|
||||
|
||||
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
# define DEBOUNCE 5
|
||||
#endif
|
||||
static uint8_t debouncing = DEBOUNCE;
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
static matrix_row_t read_cols(void);
|
||||
static void init_cols(void);
|
||||
static void unselect_rows(void);
|
||||
static void select_row(uint8_t row);
|
||||
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
|
||||
MCUCR |= (1<<JTD);
|
||||
MCUCR |= (1<<JTD);
|
||||
|
||||
rgblight_init();
|
||||
|
||||
// initialize row and col
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
matrix_debouncing[i] = 0;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
select_row(i);
|
||||
_delay_us(250); // without this wait read unstable value.
|
||||
matrix_row_t cols = read_cols();
|
||||
if (matrix_debouncing[i] != cols) {
|
||||
matrix_debouncing[i] = cols;
|
||||
if (debouncing) {
|
||||
debug("bounce!: "); debug_hex(debouncing); debug("\n");
|
||||
}
|
||||
debouncing = DEBOUNCE;
|
||||
}
|
||||
unselect_rows();
|
||||
}
|
||||
|
||||
if (debouncing) {
|
||||
if (--debouncing) {
|
||||
_delay_ms(1);
|
||||
} else {
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = matrix_debouncing[i];
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void)
|
||||
{
|
||||
if (debouncing) return false;
|
||||
return true;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print("\nr/c 0123456789ABCDEF\n");
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
pbin_reverse16(matrix_get_row(row));
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += bitpop16(matrix[i]);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
/* Column pin configuration
|
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11
|
||||
* pin: D7 E6 B4 B5 B6 B2 B3 B1 F7 F6 F5 F4
|
||||
*/
|
||||
|
||||
static void init_cols(void)
|
||||
{
|
||||
// Input with pull-up(DDR:0, PORT:1)
|
||||
DDRF &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
|
||||
PORTF |= (1<<4 | 1<<5 | 1<<6 | 1<<7);
|
||||
DDRE &= ~(1<<6);
|
||||
PORTE |= (1<<6);
|
||||
DDRD &= ~(1<<7);
|
||||
PORTD |= (1<<7);
|
||||
DDRB &= ~(1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
|
||||
PORTB |= (1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
|
||||
}
|
||||
|
||||
static matrix_row_t read_cols(void)
|
||||
{
|
||||
return (PIND&(1<<7) ? 0 : (1<<0)) |
|
||||
(PINE&(1<<6) ? 0 : (1<<1)) |
|
||||
(PINB&(1<<4) ? 0 : (1<<2)) |
|
||||
(PINB&(1<<5) ? 0 : (1<<3)) |
|
||||
(PINB&(1<<6) ? 0 : (1<<4)) |
|
||||
(PINB&(1<<2) ? 0 : (1<<5)) |
|
||||
(PINB&(1<<3) ? 0 : (1<<6)) |
|
||||
(PINB&(1<<1) ? 0 : (1<<7)) |
|
||||
(PINF&(1<<7) ? 0 : (1<<8)) |
|
||||
(PINF&(1<<6) ? 0 : (1<<9)) |
|
||||
(PINF&(1<<5) ? 0 : (1<<10)) |
|
||||
(PINF&(1<<4) ? 0 : (1<<11));
|
||||
}
|
||||
|
||||
/* Row pin configuration
|
||||
* row: 0 1 2 3
|
||||
* pin: D1 D0 D4 C6
|
||||
*/
|
||||
|
||||
static void unselect_rows(void)
|
||||
{
|
||||
// Hi-Z(DDR:0, PORT:0) to unselect
|
||||
DDRD &= ~0b00010011;
|
||||
PORTD &= ~0b00010011;
|
||||
DDRC &= ~0b01000000;
|
||||
PORTC &= ~0b01000000;
|
||||
}
|
||||
|
||||
static void select_row(uint8_t row)
|
||||
{
|
||||
// Output low(DDR:1, PORT:0) to select
|
||||
switch (row) {
|
||||
case 0:
|
||||
DDRD |= (1<<1);
|
||||
PORTD &= ~(1<<1);
|
||||
break;
|
||||
case 1:
|
||||
DDRD |= (1<<0);
|
||||
PORTD &= ~(1<<0);
|
||||
break;
|
||||
case 2:
|
||||
DDRD |= (1<<4);
|
||||
PORTD &= ~(1<<4);
|
||||
break;
|
||||
case 3:
|
||||
DDRC |= (1<<6);
|
||||
PORTC &= ~(1<<6);
|
||||
break;
|
||||
}
|
||||
}
|
||||
505
keyboard/toshi/rgblight.c
Normal file
505
keyboard/toshi/rgblight.c
Normal file
@ -0,0 +1,505 @@
|
||||
#include <avr/eeprom.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include "progmem.h"
|
||||
#include "timer.h"
|
||||
#include "rgblight.h"
|
||||
#include "debug.h"
|
||||
|
||||
const uint8_t DIM_CURVE[] PROGMEM = {
|
||||
0, 1, 1, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3,
|
||||
3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 6, 6, 6,
|
||||
6, 6, 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, 8, 8, 8, 8,
|
||||
8, 8, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 11, 11, 11,
|
||||
11, 11, 12, 12, 12, 12, 12, 13, 13, 13, 13, 14, 14, 14, 14, 15,
|
||||
15, 15, 16, 16, 16, 16, 17, 17, 17, 18, 18, 18, 19, 19, 19, 20,
|
||||
20, 20, 21, 21, 22, 22, 22, 23, 23, 24, 24, 25, 25, 25, 26, 26,
|
||||
27, 27, 28, 28, 29, 29, 30, 30, 31, 32, 32, 33, 33, 34, 35, 35,
|
||||
36, 36, 37, 38, 38, 39, 40, 40, 41, 42, 43, 43, 44, 45, 46, 47,
|
||||
48, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62,
|
||||
63, 64, 65, 66, 68, 69, 70, 71, 73, 74, 75, 76, 78, 79, 81, 82,
|
||||
83, 85, 86, 88, 90, 91, 93, 94, 96, 98, 99, 101, 103, 105, 107, 109,
|
||||
110, 112, 114, 116, 118, 121, 123, 125, 127, 129, 132, 134, 136, 139, 141, 144,
|
||||
146, 149, 151, 154, 157, 159, 162, 165, 168, 171, 174, 177, 180, 183, 186, 190,
|
||||
193, 196, 200, 203, 207, 211, 214, 218, 222, 226, 230, 234, 238, 242, 248, 255,
|
||||
};
|
||||
const uint8_t RGBLED_BREATHING_TABLE[] PROGMEM = {0,0,0,0,1,1,1,2,2,3,4,5,5,6,7,9,10,11,12,14,15,17,18,20,21,23,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,65,67,70,73,76,79,82,85,88,90,93,97,100,103,106,109,112,115,118,121,124,127,131,134,137,140,143,146,149,152,155,158,162,165,167,170,173,176,179,182,185,188,190,193,196,198,201,203,206,208,211,213,215,218,220,222,224,226,228,230,232,234,235,237,238,240,241,243,244,245,246,248,249,250,250,251,252,253,253,254,254,254,255,255,255,255,255,255,255,254,254,254,253,253,252,251,250,250,249,248,246,245,244,243,241,240,238,237,235,234,232,230,228,226,224,222,220,218,215,213,211,208,206,203,201,198,196,193,190,188,185,182,179,176,173,170,167,165,162,158,155,152,149,146,143,140,137,134,131,128,124,121,118,115,112,109,106,103,100,97,93,90,88,85,82,79,76,73,70,67,65,62,59,57,54,52,49,47,44,42,40,37,35,33,31,29,27,25,23,21,20,18,17,15,14,12,11,10,9,7,6,5,5,4,3,2,2,1,1,1,0,0,0};
|
||||
const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
|
||||
const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
|
||||
const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
|
||||
const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
|
||||
const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20};
|
||||
|
||||
rgblight_config_t rgblight_config;
|
||||
rgblight_config_t inmem_config;
|
||||
struct cRGB led[RGBLED_NUM];
|
||||
uint8_t rgblight_inited = 0;
|
||||
|
||||
|
||||
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) {
|
||||
/* convert hue, saturation and brightness ( HSB/HSV ) to RGB
|
||||
The DIM_CURVE is used only on brightness/value and on saturation (inverted).
|
||||
This looks the most natural.
|
||||
*/
|
||||
uint8_t r, g, b;
|
||||
|
||||
val = pgm_read_byte(&DIM_CURVE[val]);
|
||||
sat = 255 - pgm_read_byte(&DIM_CURVE[255 - sat]);
|
||||
|
||||
uint8_t base;
|
||||
|
||||
if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
|
||||
r = val;
|
||||
g = val;
|
||||
b = val;
|
||||
} else {
|
||||
base = ((255 - sat) * val) >> 8;
|
||||
|
||||
switch (hue / 60) {
|
||||
case 0:
|
||||
r = val;
|
||||
g = (((val - base)*hue) / 60) + base;
|
||||
b = base;
|
||||
break;
|
||||
|
||||
case 1:
|
||||
r = (((val - base)*(60 - (hue % 60))) / 60) + base;
|
||||
g = val;
|
||||
b = base;
|
||||
break;
|
||||
|
||||
case 2:
|
||||
r = base;
|
||||
g = val;
|
||||
b = (((val - base)*(hue % 60)) / 60) + base;
|
||||
break;
|
||||
|
||||
case 3:
|
||||
r = base;
|
||||
g = (((val - base)*(60 - (hue % 60))) / 60) + base;
|
||||
b = val;
|
||||
break;
|
||||
|
||||
case 4:
|
||||
r = (((val - base)*(hue % 60)) / 60) + base;
|
||||
g = base;
|
||||
b = val;
|
||||
break;
|
||||
|
||||
case 5:
|
||||
r = val;
|
||||
g = base;
|
||||
b = (((val - base)*(60 - (hue % 60))) / 60) + base;
|
||||
break;
|
||||
}
|
||||
}
|
||||
setrgb(r,g,b, led1);
|
||||
}
|
||||
|
||||
void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1) {
|
||||
(*led1).r = r;
|
||||
(*led1).g = g;
|
||||
(*led1).b = b;
|
||||
}
|
||||
|
||||
|
||||
uint32_t eeconfig_read_rgblight(void) {
|
||||
return eeprom_read_dword(EECONFIG_RGBLIGHT);
|
||||
}
|
||||
void eeconfig_write_rgblight(uint32_t val) {
|
||||
eeprom_write_dword(EECONFIG_RGBLIGHT, val);
|
||||
}
|
||||
void eeconfig_write_rgblight_default(void) {
|
||||
dprintf("eeconfig_write_rgblight_default\n");
|
||||
rgblight_config.enable = 1;
|
||||
rgblight_config.mode = 1;
|
||||
rgblight_config.hue = 200;
|
||||
rgblight_config.sat = 204;
|
||||
rgblight_config.val = 204;
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
}
|
||||
void eeconfig_debug_rgblight(void) {
|
||||
dprintf("rgblight_config eprom\n");
|
||||
dprintf("rgblight_config.enable = %d\n", rgblight_config.enable);
|
||||
dprintf("rghlight_config.mode = %d\n", rgblight_config.mode);
|
||||
dprintf("rgblight_config.hue = %d\n", rgblight_config.hue);
|
||||
dprintf("rgblight_config.sat = %d\n", rgblight_config.sat);
|
||||
dprintf("rgblight_config.val = %d\n", rgblight_config.val);
|
||||
}
|
||||
|
||||
void rgblight_init(void) {
|
||||
debug_enable = 1; // Debug ON!
|
||||
dprintf("rgblight_init called.\n");
|
||||
rgblight_inited = 1;
|
||||
dprintf("rgblight_init start!\n");
|
||||
if (!eeconfig_is_enabled()) {
|
||||
dprintf("rgblight_init eeconfig is not enabled.\n");
|
||||
eeconfig_init();
|
||||
eeconfig_write_rgblight_default();
|
||||
}
|
||||
rgblight_config.raw = eeconfig_read_rgblight();
|
||||
if (!rgblight_config.mode) {
|
||||
dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n");
|
||||
eeconfig_write_rgblight_default();
|
||||
rgblight_config.raw = eeconfig_read_rgblight();
|
||||
}
|
||||
eeconfig_debug_rgblight(); // display current eeprom values
|
||||
|
||||
rgblight_timer_init(); // setup the timer
|
||||
|
||||
if (rgblight_config.enable) {
|
||||
rgblight_mode(rgblight_config.mode);
|
||||
}
|
||||
}
|
||||
|
||||
void rgblight_increase(void) {
|
||||
uint8_t mode;
|
||||
if (rgblight_config.mode < RGBLIGHT_MODES) {
|
||||
mode = rgblight_config.mode + 1;
|
||||
}
|
||||
rgblight_mode(mode);
|
||||
}
|
||||
|
||||
void rgblight_decrease(void) {
|
||||
uint8_t mode;
|
||||
if (rgblight_config.mode > 1) { //mode will never < 1, if mode is less than 1, eeprom need to be initialized.
|
||||
mode = rgblight_config.mode-1;
|
||||
}
|
||||
rgblight_mode(mode);
|
||||
}
|
||||
|
||||
void rgblight_step(void) {
|
||||
uint8_t mode;
|
||||
mode = rgblight_config.mode + 1;
|
||||
if (mode > RGBLIGHT_MODES) {
|
||||
mode = 1;
|
||||
}
|
||||
rgblight_mode(mode);
|
||||
}
|
||||
|
||||
void rgblight_mode(uint8_t mode) {
|
||||
if (!rgblight_config.enable) {
|
||||
return;
|
||||
}
|
||||
if (mode<1) {
|
||||
rgblight_config.mode = 1;
|
||||
} else if (mode > RGBLIGHT_MODES) {
|
||||
rgblight_config.mode = RGBLIGHT_MODES;
|
||||
} else {
|
||||
rgblight_config.mode = mode;
|
||||
}
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
dprintf("rgblight mode: %u\n", rgblight_config.mode);
|
||||
if (rgblight_config.mode == 1) {
|
||||
rgblight_timer_disable();
|
||||
} else if (rgblight_config.mode >=2 && rgblight_config.mode <=23) {
|
||||
// MODE 2-5, breathing
|
||||
// MODE 6-8, rainbow mood
|
||||
// MODE 9-14, rainbow swirl
|
||||
// MODE 15-20, snake
|
||||
// MODE 21-23, knight
|
||||
rgblight_timer_enable();
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
|
||||
void rgblight_toggle(void) {
|
||||
rgblight_config.enable ^= 1;
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
dprintf("rgblight toggle: rgblight_config.enable = %u\n", rgblight_config.enable);
|
||||
if (rgblight_config.enable) {
|
||||
rgblight_mode(rgblight_config.mode);
|
||||
} else {
|
||||
rgblight_timer_disable();
|
||||
_delay_ms(50);
|
||||
rgblight_set();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void rgblight_increase_hue(void){
|
||||
uint16_t hue;
|
||||
hue = (rgblight_config.hue+RGBLIGHT_HUE_STEP) % 360;
|
||||
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_decrease_hue(void){
|
||||
uint16_t hue;
|
||||
if (rgblight_config.hue-RGBLIGHT_HUE_STEP <0 ) {
|
||||
hue = (rgblight_config.hue+360-RGBLIGHT_HUE_STEP) % 360;
|
||||
} else {
|
||||
hue = (rgblight_config.hue-RGBLIGHT_HUE_STEP) % 360;
|
||||
}
|
||||
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_increase_sat(void) {
|
||||
uint8_t sat;
|
||||
if (rgblight_config.sat + RGBLIGHT_SAT_STEP > 255) {
|
||||
sat = 255;
|
||||
} else {
|
||||
sat = rgblight_config.sat+RGBLIGHT_SAT_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_decrease_sat(void){
|
||||
uint8_t sat;
|
||||
if (rgblight_config.sat - RGBLIGHT_SAT_STEP < 0) {
|
||||
sat = 0;
|
||||
} else {
|
||||
sat = rgblight_config.sat-RGBLIGHT_SAT_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_increase_val(void){
|
||||
uint8_t val;
|
||||
if (rgblight_config.val + RGBLIGHT_VAL_STEP > 255) {
|
||||
val = 255;
|
||||
} else {
|
||||
val = rgblight_config.val+RGBLIGHT_VAL_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
|
||||
}
|
||||
void rgblight_decrease_val(void) {
|
||||
uint8_t val;
|
||||
if (rgblight_config.val - RGBLIGHT_VAL_STEP < 0) {
|
||||
val = 0;
|
||||
} else {
|
||||
val = rgblight_config.val-RGBLIGHT_VAL_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
|
||||
}
|
||||
|
||||
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val){
|
||||
inmem_config.raw = rgblight_config.raw;
|
||||
if (rgblight_config.enable) {
|
||||
struct cRGB tmp_led;
|
||||
sethsv(hue, sat, val, &tmp_led);
|
||||
inmem_config.hue = hue;
|
||||
inmem_config.sat = sat;
|
||||
inmem_config.val = val;
|
||||
// dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val);
|
||||
rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
|
||||
}
|
||||
}
|
||||
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val){
|
||||
if (rgblight_config.enable) {
|
||||
if (rgblight_config.mode == 1) {
|
||||
// same static color
|
||||
rgblight_sethsv_noeeprom(hue, sat, val);
|
||||
} else {
|
||||
// all LEDs in same color
|
||||
if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
|
||||
// breathing mode, ignore the change of val, use in memory value instead
|
||||
val = rgblight_config.val;
|
||||
} else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) {
|
||||
// rainbow mood and rainbow swirl, ignore the change of hue
|
||||
hue = rgblight_config.hue;
|
||||
}
|
||||
}
|
||||
rgblight_config.hue = hue;
|
||||
rgblight_config.sat = sat;
|
||||
rgblight_config.val = val;
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
dprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
}
|
||||
|
||||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b){
|
||||
// dprintf("rgblight set rgb: %u,%u,%u\n", r,g,b);
|
||||
for (uint8_t i=0;i<RGBLED_NUM;i++) {
|
||||
led[i].r = r;
|
||||
led[i].g = g;
|
||||
led[i].b = b;
|
||||
}
|
||||
rgblight_set();
|
||||
|
||||
}
|
||||
|
||||
void rgblight_set(void) {
|
||||
if (rgblight_config.enable) {
|
||||
ws2812_setleds(led, RGBLED_NUM);
|
||||
} else {
|
||||
for (uint8_t i=0;i<RGBLED_NUM;i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
}
|
||||
ws2812_setleds(led, RGBLED_NUM);
|
||||
}
|
||||
}
|
||||
|
||||
// Animation timer -- AVR Timer3
|
||||
void rgblight_timer_init(void) {
|
||||
static uint8_t rgblight_timer_is_init = 0;
|
||||
if (rgblight_timer_is_init) {
|
||||
return;
|
||||
}
|
||||
rgblight_timer_is_init = 1;
|
||||
/* Timer 3 setup */
|
||||
TCCR3B = _BV(WGM32) //CTC mode OCR3A as TOP
|
||||
| _BV(CS30); //Clock selelct: clk/1
|
||||
/* Set TOP value */
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
OCR3AH = (RGBLED_TIMER_TOP>>8)&0xff;
|
||||
OCR3AL = RGBLED_TIMER_TOP&0xff;
|
||||
SREG = sreg;
|
||||
}
|
||||
void rgblight_timer_enable(void) {
|
||||
TIMSK3 |= _BV(OCIE3A);
|
||||
dprintf("TIMER3 enabled.\n");
|
||||
}
|
||||
void rgblight_timer_disable(void) {
|
||||
TIMSK3 &= ~_BV(OCIE3A);
|
||||
dprintf("TIMER3 disabled.\n");
|
||||
}
|
||||
void rgblight_timer_toggle(void) {
|
||||
TIMSK3 ^= _BV(OCIE3A);
|
||||
dprintf("TIMER3 toggled.\n");
|
||||
}
|
||||
|
||||
ISR(TIMER3_COMPA_vect) {
|
||||
// Mode = 1, static light, do nothing here
|
||||
if (rgblight_config.mode>=2 && rgblight_config.mode<=5) {
|
||||
// mode = 2 to 5, breathing mode
|
||||
rgblight_effect_breathing(rgblight_config.mode-2);
|
||||
|
||||
} else if (rgblight_config.mode>=6 && rgblight_config.mode<=8) {
|
||||
rgblight_effect_rainbow_mood(rgblight_config.mode-6);
|
||||
} else if (rgblight_config.mode>=9 && rgblight_config.mode<=14) {
|
||||
rgblight_effect_rainbow_swirl(rgblight_config.mode-9);
|
||||
} else if (rgblight_config.mode>=15 && rgblight_config.mode<=20) {
|
||||
rgblight_effect_snake(rgblight_config.mode-15);
|
||||
} else if (rgblight_config.mode>=21 && rgblight_config.mode<=23) {
|
||||
rgblight_effect_knight(rgblight_config.mode-21);
|
||||
}
|
||||
}
|
||||
|
||||
// effects
|
||||
void rgblight_effect_breathing(uint8_t interval) {
|
||||
static uint8_t pos = 0;
|
||||
static uint16_t last_timer = 0;
|
||||
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) return;
|
||||
last_timer = timer_read();
|
||||
|
||||
rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, pgm_read_byte(&RGBLED_BREATHING_TABLE[pos]));
|
||||
pos = (pos+1) % 256;
|
||||
}
|
||||
|
||||
void rgblight_effect_rainbow_mood(uint8_t interval) {
|
||||
static uint16_t current_hue=0;
|
||||
static uint16_t last_timer = 0;
|
||||
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval])) return;
|
||||
last_timer = timer_read();
|
||||
rgblight_sethsv_noeeprom(current_hue, rgblight_config.sat, rgblight_config.val);
|
||||
current_hue = (current_hue+1) % 360;
|
||||
}
|
||||
|
||||
void rgblight_effect_rainbow_swirl(uint8_t interval) {
|
||||
static uint16_t current_hue=0;
|
||||
static uint16_t last_timer = 0;
|
||||
uint16_t hue;
|
||||
uint8_t i;
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval/2])) return;
|
||||
last_timer = timer_read();
|
||||
for (i=0; i<RGBLED_NUM; i++) {
|
||||
hue = (360/RGBLED_NUM*i+current_hue)%360;
|
||||
sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]);
|
||||
}
|
||||
rgblight_set();
|
||||
|
||||
if (interval % 2) {
|
||||
current_hue = (current_hue+1) % 360;
|
||||
} else {
|
||||
if (current_hue -1 < 0) {
|
||||
current_hue = 359;
|
||||
} else {
|
||||
current_hue = current_hue - 1;
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
void rgblight_effect_snake(uint8_t interval) {
|
||||
static uint8_t pos=0;
|
||||
static uint16_t last_timer = 0;
|
||||
uint8_t i,j;
|
||||
int8_t k;
|
||||
int8_t increament = 1;
|
||||
if (interval%2) increament = -1;
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_SNAKE_INTERVALS[interval/2])) return;
|
||||
last_timer = timer_read();
|
||||
for (i=0;i<RGBLED_NUM;i++) {
|
||||
led[i].r=0;
|
||||
led[i].g=0;
|
||||
led[i].b=0;
|
||||
for (j=0;j<RGBLIGHT_EFFECT_SNAKE_LENGTH;j++) {
|
||||
k = pos+j*increament;
|
||||
if (k<0) k = k+RGBLED_NUM;
|
||||
if (i==k) {
|
||||
sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]);
|
||||
}
|
||||
}
|
||||
}
|
||||
rgblight_set();
|
||||
if (increament == 1) {
|
||||
if (pos - 1 < 0) {
|
||||
pos = 13;
|
||||
} else {
|
||||
pos -= 1;
|
||||
}
|
||||
} else {
|
||||
pos = (pos+1)%RGBLED_NUM;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void rgblight_effect_knight(uint8_t interval) {
|
||||
static int8_t pos=0;
|
||||
static uint16_t last_timer = 0;
|
||||
uint8_t i,j,cur;
|
||||
int8_t k;
|
||||
struct cRGB preled[RGBLED_NUM];
|
||||
static int8_t increament = -1;
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) return;
|
||||
last_timer = timer_read();
|
||||
for (i=0;i<RGBLED_NUM;i++) {
|
||||
preled[i].r=0;
|
||||
preled[i].g=0;
|
||||
preled[i].b=0;
|
||||
for (j=0;j<RGBLIGHT_EFFECT_KNIGHT_LENGTH;j++) {
|
||||
k = pos+j*increament;
|
||||
if (k<0) k = 0;
|
||||
if (k>=RGBLED_NUM) k=RGBLED_NUM-1;
|
||||
if (i==k) {
|
||||
sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]);
|
||||
}
|
||||
}
|
||||
}
|
||||
if (RGBLIGHT_EFFECT_KNIGHT_OFFSET) {
|
||||
for (i=0;i<RGBLED_NUM;i++) {
|
||||
cur = (i+RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM;
|
||||
led[i].r = preled[cur].r;
|
||||
led[i].g = preled[cur].g;
|
||||
led[i].b = preled[cur].b;
|
||||
}
|
||||
}
|
||||
rgblight_set();
|
||||
if (increament == 1) {
|
||||
if (pos - 1 < 0 - RGBLIGHT_EFFECT_KNIGHT_LENGTH) {
|
||||
pos = 0- RGBLIGHT_EFFECT_KNIGHT_LENGTH;
|
||||
increament = -1;
|
||||
} else {
|
||||
pos -= 1;
|
||||
}
|
||||
} else {
|
||||
if (pos+1>RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH) {
|
||||
pos = RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH-1;
|
||||
increament = 1;
|
||||
} else {
|
||||
pos += 1;
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
87
keyboard/toshi/rgblight.h
Normal file
87
keyboard/toshi/rgblight.h
Normal file
@ -0,0 +1,87 @@
|
||||
#ifndef RGBLIGHT_H
|
||||
#define RGBLIGHT_H
|
||||
|
||||
#ifndef RGBLIGHT_MODES
|
||||
#define RGBLIGHT_MODES 23
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH
|
||||
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 7
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_KNIGHT_LENGTH
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 7
|
||||
#endif
|
||||
#ifndef RGBLIGHT_EFFECT_KNIGHT_OFFSET
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 11
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH
|
||||
#define RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH 4
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_HUE_STEP
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#endif
|
||||
#ifndef RGBLIGHT_SAT_STEP
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#endif
|
||||
#ifndef RGBLIGHT_VAL_STEP
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
#endif
|
||||
|
||||
#define RGBLED_TIMER_TOP F_CPU/(256*64)
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include "eeconfig.h"
|
||||
#include "light_ws2812.h"
|
||||
|
||||
typedef union {
|
||||
uint32_t raw;
|
||||
struct {
|
||||
bool enable :1;
|
||||
uint8_t mode :6;
|
||||
uint16_t hue :9;
|
||||
uint8_t sat :8;
|
||||
uint8_t val :8;
|
||||
};
|
||||
} rgblight_config_t;
|
||||
|
||||
void rgblight_init(void);
|
||||
void rgblight_increase(void);
|
||||
void rgblight_decrease(void);
|
||||
void rgblight_toggle(void);
|
||||
void rgblight_step(void);
|
||||
void rgblight_mode(uint8_t mode);
|
||||
void rgblight_set(void);
|
||||
void rgblight_increase_hue(void);
|
||||
void rgblight_decrease_hue(void);
|
||||
void rgblight_increase_sat(void);
|
||||
void rgblight_decrease_sat(void);
|
||||
void rgblight_increase_val(void);
|
||||
void rgblight_decrease_val(void);
|
||||
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
|
||||
|
||||
#define EECONFIG_RGBLIGHT (uint8_t *)7
|
||||
uint32_t eeconfig_read_rgblight(void);
|
||||
void eeconfig_write_rgblight(uint32_t val);
|
||||
void eeconfig_write_rgblight_default(void);
|
||||
void eeconfig_debug_rgblight(void);
|
||||
|
||||
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1);
|
||||
void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1);
|
||||
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
|
||||
void rgblight_timer_init(void);
|
||||
void rgblight_timer_enable(void);
|
||||
void rgblight_timer_disable(void);
|
||||
void rgblight_timer_toggle(void);
|
||||
void rgblight_effect_breathing(uint8_t interval);
|
||||
void rgblight_effect_rainbow_mood(uint8_t interval);
|
||||
void rgblight_effect_rainbow_swirl(uint8_t interval);
|
||||
void rgblight_effect_snake(uint8_t interval);
|
||||
void rgblight_effect_knight(uint8_t interval);
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user