From a1b3d28e449c244b36b9669903647c144bc6d891 Mon Sep 17 00:00:00 2001 From: di0ib Date: Tue, 29 Sep 2020 20:16:43 +0000 Subject: [PATCH] Upload files to 'keyboard/60percent09' --- keyboard/60percent09/Makefile | 135 ++++++++++++++++++++++ keyboard/60percent09/config.h | 86 ++++++++++++++ keyboard/60percent09/keymap_60percent09.c | 61 ++++++++++ keyboard/60percent09/keymap_common.h | 49 ++++++++ keyboard/60percent09/led.c | 25 ++++ 5 files changed, 356 insertions(+) create mode 100644 keyboard/60percent09/Makefile create mode 100644 keyboard/60percent09/config.h create mode 100644 keyboard/60percent09/keymap_60percent09.c create mode 100644 keyboard/60percent09/keymap_common.h create mode 100644 keyboard/60percent09/led.c diff --git a/keyboard/60percent09/Makefile b/keyboard/60percent09/Makefile new file mode 100644 index 00000000..177d9f07 --- /dev/null +++ b/keyboard/60percent09/Makefile @@ -0,0 +1,135 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = 60percent09 + +# Directory common source filess exist +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_60percent09.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega328p + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=2048 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +#COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA +#BACKLIGHT_ENABLE = no + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/protocol/vusb.mk +include $(TMK_DIR)/rules.mk diff --git a/keyboard/60percent09/config.h b/keyboard/60percent09/config.h new file mode 100644 index 00000000..8cb107ab --- /dev/null +++ b/keyboard/60percent09/config.h @@ -0,0 +1,86 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0A0C +#define DEVICE_VER 0x6009 +#define MANUFACTURER di0ib +#define PRODUCT 60percent09 Keyboard +#define DESCRIPTION A compact keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 4 + +/* define if matrix has ghost */ +#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define ws2812_PORTREG PORTB +#define ws2812_DDRREG DDRB +#define ws2812_pin PB2 +#define RGBLED_NUM 3 // Number of LEDs +#ifndef RGBLIGHT_HUE_STEP +#define RGBLIGHT_HUE_STEP 10 +#endif +#ifndef RGBLIGHT_SAT_STEP +#define RGBLIGHT_SAT_STEP 17 +#endif +#ifndef RGBLIGHT_VAL_STEP +#define RGBLIGHT_VAL_STEP 17 +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/60percent09/keymap_60percent09.c b/keyboard/60percent09/keymap_60percent09.c new file mode 100644 index 00000000..e71de997 --- /dev/null +++ b/keyboard/60percent09/keymap_60percent09.c @@ -0,0 +1,61 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +KEYMAP( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, + GRV, Q, W, E, R, T, Y, U, I, O, P, DELETE, + FN2, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN3, + LCTL, LALT, LGUI, APP, FN1, SPC, SPC, FN0, LEFT, DOWN, UP, RGHT +), + +KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DELETE, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, + TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, + TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END +), + +KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + FN6, FN7, FN8, FN9, FN10, FN11, FN12, FN13, FN14, FN15, FN16, DELETE, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN17, FN18, FN19, FN20, FN21, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, + TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END +), + +KEYMAP( /* Tab */ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + ESC, CALC, WHOM, MAIL, MYCM, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MS_L, MS_D, MS_U, MS_R +), +}; + + +const action_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_LAYER_MOMENTARY(2), + [2] = ACTION_LAYER_TAP_KEY(3, KC_TAB), + [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [6] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [7] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [8] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [9] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +}; + diff --git a/keyboard/60percent09/keymap_common.h b/keyboard/60percent09/keymap_common.h new file mode 100644 index 00000000..40c0d2e1 --- /dev/null +++ b/keyboard/60percent09/keymap_common.h @@ -0,0 +1,49 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include +#include +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b \ +) \ +{ \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4a, KC_##K4b } \ +} + +#endif diff --git a/keyboard/60percent09/led.c b/keyboard/60percent09/led.c new file mode 100644 index 00000000..4849c611 --- /dev/null +++ b/keyboard/60percent09/led.c @@ -0,0 +1,25 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ +}