#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = 60percent09 | |||||
# Directory common source filess exist | |||||
TMK_DIR = ../../tmk_core | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# project specific files | |||||
SRC = matrix.c \ | |||||
led.c | |||||
ifdef KEYMAP | |||||
SRC := keymap_$(KEYMAP).c $(SRC) | |||||
else | |||||
SRC := keymap_60percent09.c $(SRC) | |||||
endif | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega328p | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=2048 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||||
#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
#COMMAND_ENABLE = no # Commands for debug and configuration | |||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||||
#NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA | |||||
#BACKLIGHT_ENABLE = no | |||||
# Optimize size but this may cause error "relocation truncated to fit" | |||||
#EXTRALDFLAGS = -Wl,--relax | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TMK_DIR) | |||||
include $(TMK_DIR)/protocol.mk | |||||
include $(TMK_DIR)/common.mk | |||||
include $(TMK_DIR)/protocol/vusb.mk | |||||
include $(TMK_DIR)/rules.mk |
/* | |||||
Copyright 2012 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0A0C | |||||
#define DEVICE_VER 0x6009 | |||||
#define MANUFACTURER di0ib | |||||
#define PRODUCT 60percent09 Keyboard | |||||
#define DESCRIPTION A compact keyboard | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 5 | |||||
#define MATRIX_COLS 12 | |||||
/* number of backlight levels */ | |||||
#define BACKLIGHT_LEVELS 4 | |||||
/* define if matrix has ghost */ | |||||
#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* ws2812 RGB LED */ | |||||
#define ws2812_PORTREG PORTB | |||||
#define ws2812_DDRREG DDRB | |||||
#define ws2812_pin PB2 | |||||
#define RGBLED_NUM 3 // Number of LEDs | |||||
#ifndef RGBLIGHT_HUE_STEP | |||||
#define RGBLIGHT_HUE_STEP 10 | |||||
#endif | |||||
#ifndef RGBLIGHT_SAT_STEP | |||||
#define RGBLIGHT_SAT_STEP 17 | |||||
#endif | |||||
#ifndef RGBLIGHT_VAL_STEP | |||||
#define RGBLIGHT_VAL_STEP 17 | |||||
#endif | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
#include "keymap_common.h" | |||||
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
KEYMAP( | |||||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, | |||||
GRV, Q, W, E, R, T, Y, U, I, O, P, DELETE, | |||||
FN2, A, S, D, F, G, H, J, K, L, SCLN, QUOT, | |||||
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN3, | |||||
LCTL, LALT, LGUI, APP, FN1, SPC, SPC, FN0, LEFT, DOWN, UP, RGHT | |||||
), | |||||
KEYMAP( | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DELETE, | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, | |||||
TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, | |||||
TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END | |||||
), | |||||
KEYMAP( | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||||
FN6, FN7, FN8, FN9, FN10, FN11, FN12, FN13, FN14, FN15, FN16, DELETE, | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN17, FN18, FN19, FN20, FN21, | |||||
TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, | |||||
TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END | |||||
), | |||||
KEYMAP( /* Tab */ | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||||
ESC, CALC, WHOM, MAIL, MYCM, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, TRNS, | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MS_L, MS_D, MS_U, MS_R | |||||
), | |||||
}; | |||||
const action_t PROGMEM fn_actions[] = { | |||||
[0] = ACTION_LAYER_MOMENTARY(1), | |||||
[1] = ACTION_LAYER_MOMENTARY(2), | |||||
[2] = ACTION_LAYER_TAP_KEY(3, KC_TAB), | |||||
[3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), | |||||
[6] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), | |||||
[7] = ACTION_MODS_KEY(MOD_LSFT, KC_1), | |||||
[8] = ACTION_MODS_KEY(MOD_LSFT, KC_2), | |||||
[9] = ACTION_MODS_KEY(MOD_LSFT, KC_3), | |||||
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_4), | |||||
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_5), | |||||
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_6), | |||||
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_7), | |||||
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_8), | |||||
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_9), | |||||
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_0), | |||||
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), | |||||
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), | |||||
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), | |||||
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), | |||||
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), | |||||
}; | |||||
/* | |||||
Copyright 2012,2013 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef KEYMAP_COMMON_H | |||||
#define KEYMAP_COMMON_H | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include "keycode.h" | |||||
#include "action.h" | |||||
#include "action_macro.h" | |||||
#include "report.h" | |||||
#include "host.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "keymap.h" | |||||
#define KEYMAP( \ | |||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ | |||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ | |||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ | |||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, \ | |||||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b \ | |||||
) \ | |||||
{ \ | |||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b }, \ | |||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b }, \ | |||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b }, \ | |||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b }, \ | |||||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4a, KC_##K4b } \ | |||||
} | |||||
#endif |
/* | |||||
Copyright 2012 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/io.h> | |||||
#include "stdint.h" | |||||
#include "led.h" | |||||
void led_set(uint8_t usb_led) | |||||
{ | |||||
} |