@@ -1,668 +1,17 @@ | |||
# Hey Emacs, this is a -*- makefile -*- | |||
#---------------------------------------------------------------------------- | |||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. | |||
# | |||
# Released to the Public Domain | |||
# | |||
# Additional material for this makefile was written by: | |||
# Peter Fleury | |||
# Tim Henigan | |||
# Colin O'Flynn | |||
# Reiner Patommel | |||
# Markus Pfaff | |||
# Sander Pool | |||
# Frederik Rouleau | |||
# Carlos Lamas | |||
# | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device, using avrdude. | |||
# Please customize the avrdude settings below first! | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Following variables need to be set in <target>/Makefile: | |||
# TARGET | |||
# COMMON_DIR | |||
# TARGET_DIR | |||
# TARGET_SRC | |||
# MCU | |||
# F_CPU | |||
# List C source files here. (C dependencies are automatically generated.) | |||
SRC = tmk.c \ | |||
SRC += keyboard.c \ | |||
layer.c \ | |||
key_process.c \ | |||
usb_keyboard.c \ | |||
usb_debug.c \ | |||
usb.c \ | |||
jump_bootloader.c \ | |||
print.c \ | |||
timer.c \ | |||
print.c \ | |||
util.c | |||
SRC += $(TARGET_SRC) | |||
# Option modules | |||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||
SRC += usb_mouse.c | |||
endif | |||
ifdef MOUSEKEY_ENABLE | |||
SRC += mousekey.c | |||
endif | |||
ifdef PS2_MOUSE_ENABLE | |||
SRC += ps2.c \ | |||
ps2_mouse.c | |||
endif | |||
ifdef USB_EXTRA_ENABLE | |||
SRC += usb_extra.c | |||
endif | |||
ALL_SRC = $(SRC) | |||
ALL_SRC += usb_mouse.c \ | |||
mousekey.c \ | |||
ps2.c \ | |||
ps2_mouse.c \ | |||
usb_extra.c | |||
# C source file search path | |||
VPATH = $(TARGET_DIR):$(COMMON_DIR) | |||
# Output format. (can be srec, ihex, binary) | |||
FORMAT = ihex | |||
# Object files directory | |||
# To put object files in current directory, use a dot (.), do NOT make | |||
# this an empty or blank macro! | |||
OBJDIR = . | |||
# List C++ source files here. (C dependencies are automatically generated.) | |||
CPPSRC = | |||
# List Assembler source files here. | |||
# Make them always end in a capital .S. Files ending in a lowercase .s | |||
# will not be considered source files but generated files (assembler | |||
# output from the compiler), and will be deleted upon "make clean"! | |||
# Even though the DOS/Win* filesystem matches both .s and .S the same, | |||
# it will preserve the spelling of the filenames, and gcc itself does | |||
# care about how the name is spelled on its command-line. | |||
ASRC = | |||
# Optimization level, can be [0, 1, 2, 3, s]. | |||
# 0 = turn off optimization. s = optimize for size. | |||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) | |||
OPT = s | |||
# Debugging format. | |||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. | |||
# AVR Studio 4.10 requires dwarf-2. | |||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. | |||
DEBUG = dwarf-2 | |||
# List any extra directories to look for include files here. | |||
# Each directory must be seperated by a space. | |||
# Use forward slashes for directory separators. | |||
# For a directory that has spaces, enclose it in quotes. | |||
EXTRAINCDIRS = $(TARGET_DIR) $(COMMON_DIR) | |||
# Compiler flag to set the C Standard level. | |||
# c89 = "ANSI" C | |||
# gnu89 = c89 plus GCC extensions | |||
# c99 = ISO C99 standard (not yet fully implemented) | |||
# gnu99 = c99 plus GCC extensions | |||
CSTANDARD = -std=gnu99 | |||
OPT_DEFS = | |||
ifdef MOUSEKEY_ENABLE | |||
OPT_DEFS += -DMOUSEKEY_ENABLE | |||
endif | |||
ifdef PS2_MOUSE_ENABLE | |||
OPT_DEFS += -DPS2_MOUSE_ENABLE | |||
endif | |||
ifdef USB_EXTRA_ENABLE | |||
OPT_DEFS += -DUSB_EXTRA_ENABLE | |||
endif | |||
ifdef USB_NKRO_ENABLE | |||
OPT_DEFS += -DUSB_NKRO_ENABLE | |||
endif | |||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||
OPT_DEFS += -DUSB_MOUSE_ENABLE | |||
endif | |||
# Place -D or -U options here for C sources | |||
CDEFS = -DF_CPU=$(F_CPU)UL | |||
CDEFS += $(OPT_DEFS) | |||
# Place -D or -U options here for ASM sources | |||
ADEFS = -DF_CPU=$(F_CPU) | |||
ADEFS += $(OPT_DEFS) | |||
# Place -D or -U options here for C++ sources | |||
CPPDEFS = -DF_CPU=$(F_CPU)UL | |||
#CPPDEFS += -D__STDC_LIMIT_MACROS | |||
#CPPDEFS += -D__STDC_CONSTANT_MACROS | |||
CPPDEFS += $(OPT_DEFS) | |||
#---------------- Compiler Options C ---------------- | |||
# -g*: generate debugging information | |||
# -O*: optimization level | |||
# -f...: tuning, see GCC manual and avr-libc documentation | |||
# -Wall...: warning level | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns...: create assembler listing | |||
CFLAGS = -g$(DEBUG) | |||
CFLAGS += $(CDEFS) | |||
CFLAGS += -O$(OPT) | |||
CFLAGS += -funsigned-char | |||
CFLAGS += -funsigned-bitfields | |||
CFLAGS += -ffunction-sections | |||
CFLAGS += -fpack-struct | |||
CFLAGS += -fshort-enums | |||
CFLAGS += -Wall | |||
CFLAGS += -Wstrict-prototypes | |||
#CFLAGS += -mshort-calls | |||
#CFLAGS += -fno-unit-at-a-time | |||
#CFLAGS += -Wundef | |||
#CFLAGS += -Wunreachable-code | |||
#CFLAGS += -Wsign-compare | |||
CFLAGS += -Wa,-adhlns=$(@:%.o=$(OBJDIR)/%.lst) | |||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) | |||
CFLAGS += $(CSTANDARD) | |||
CFLAGS += -include config.h | |||
#---------------- Compiler Options C++ ---------------- | |||
# -g*: generate debugging information | |||
# -O*: optimization level | |||
# -f...: tuning, see GCC manual and avr-libc documentation | |||
# -Wall...: warning level | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns...: create assembler listing | |||
CPPFLAGS = -g$(DEBUG) | |||
CPPFLAGS += $(CPPDEFS) | |||
CPPFLAGS += -O$(OPT) | |||
CPPFLAGS += -funsigned-char | |||
CPPFLAGS += -funsigned-bitfields | |||
CPPFLAGS += -fpack-struct | |||
CPPFLAGS += -fshort-enums | |||
CPPFLAGS += -fno-exceptions | |||
CPPFLAGS += -Wall | |||
CPPFLAGS += -Wundef | |||
#CPPFLAGS += -mshort-calls | |||
#CPPFLAGS += -fno-unit-at-a-time | |||
#CPPFLAGS += -Wstrict-prototypes | |||
#CPPFLAGS += -Wunreachable-code | |||
#CPPFLAGS += -Wsign-compare | |||
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) | |||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) | |||
#CPPFLAGS += $(CSTANDARD) | |||
CPPFLAGS += -include config.h | |||
#---------------- Assembler Options ---------------- | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns: create listing | |||
# -gstabs: have the assembler create line number information; note that | |||
# for use in COFF files, additional information about filenames | |||
# and function names needs to be present in the assembler source | |||
# files -- see avr-libc docs [FIXME: not yet described there] | |||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex | |||
# dump that will be displayed for a given single line of source input. | |||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 | |||
ASFLAGS += -include config.h | |||
#---------------- Library Options ---------------- | |||
# Minimalistic printf version | |||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min | |||
# Floating point printf version (requires MATH_LIB = -lm below) | |||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt | |||
# If this is left blank, then it will use the Standard printf version. | |||
PRINTF_LIB = | |||
#PRINTF_LIB = $(PRINTF_LIB_MIN) | |||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) | |||
# Minimalistic scanf version | |||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min | |||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) | |||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt | |||
# If this is left blank, then it will use the Standard scanf version. | |||
SCANF_LIB = | |||
#SCANF_LIB = $(SCANF_LIB_MIN) | |||
#SCANF_LIB = $(SCANF_LIB_FLOAT) | |||
MATH_LIB = -lm | |||
# List any extra directories to look for libraries here. | |||
# Each directory must be seperated by a space. | |||
# Use forward slashes for directory separators. | |||
# For a directory that has spaces, enclose it in quotes. | |||
EXTRALIBDIRS = | |||
#---------------- External Memory Options ---------------- | |||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), | |||
# used for variables (.data/.bss) and heap (malloc()). | |||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff | |||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), | |||
# only used for heap (malloc()). | |||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff | |||
EXTMEMOPTS = | |||
#---------------- Linker Options ---------------- | |||
# -Wl,...: tell GCC to pass this to linker. | |||
# -Map: create map file | |||
# --cref: add cross reference to map file | |||
# | |||
# Comennt out "--relax" option to avoid a error such: | |||
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' | |||
# | |||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref | |||
LDFLAGS += -Wl,--relax | |||
LDFLAGS += -Wl,--gc-sections | |||
LDFLAGS += $(EXTMEMOPTS) | |||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) | |||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) | |||
#LDFLAGS += -T linker_script.x | |||
#---------------- Programming Options (avrdude) ---------------- | |||
# Programming hardware | |||
# Type: avrdude -c ? | |||
# to get a full listing. | |||
# | |||
AVRDUDE_PROGRAMMER = stk500v2 | |||
# com1 = serial port. Use lpt1 to connect to parallel port. | |||
AVRDUDE_PORT = com1 # programmer connected to serial device | |||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex | |||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep | |||
# Uncomment the following if you want avrdude's erase cycle counter. | |||
# Note that this counter needs to be initialized first using -Yn, | |||
# see avrdude manual. | |||
#AVRDUDE_ERASE_COUNTER = -y | |||
# Uncomment the following if you do /not/ wish a verification to be | |||
# performed after programming the device. | |||
#AVRDUDE_NO_VERIFY = -V | |||
# Increase verbosity level. Please use this when submitting bug | |||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> | |||
# to submit bug reports. | |||
#AVRDUDE_VERBOSE = -v -v | |||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) | |||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) | |||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) | |||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) | |||
#---------------- Debugging Options ---------------- | |||
# For simulavr only - target MCU frequency. | |||
DEBUG_MFREQ = $(F_CPU) | |||
# Set the DEBUG_UI to either gdb or insight. | |||
# DEBUG_UI = gdb | |||
DEBUG_UI = insight | |||
# Set the debugging back-end to either avarice, simulavr. | |||
DEBUG_BACKEND = avarice | |||
#DEBUG_BACKEND = simulavr | |||
# GDB Init Filename. | |||
GDBINIT_FILE = __avr_gdbinit | |||
# When using avarice settings for the JTAG | |||
JTAG_DEV = /dev/com1 | |||
# Debugging port used to communicate between GDB / avarice / simulavr. | |||
DEBUG_PORT = 4242 | |||
# Debugging host used to communicate between GDB / avarice / simulavr, normally | |||
# just set to localhost unless doing some sort of crazy debugging when | |||
# avarice is running on a different computer. | |||
DEBUG_HOST = localhost | |||
#============================================================================ | |||
# Define programs and commands. | |||
SHELL = sh | |||
CC = avr-gcc | |||
OBJCOPY = avr-objcopy | |||
OBJDUMP = avr-objdump | |||
SIZE = avr-size | |||
AR = avr-ar rcs | |||
NM = avr-nm | |||
AVRDUDE = avrdude | |||
REMOVE = rm -f | |||
REMOVEDIR = rm -rf | |||
COPY = cp | |||
WINSHELL = cmd | |||
# Define Messages | |||
# English | |||
MSG_ERRORS_NONE = Errors: none | |||
MSG_BEGIN = -------- begin -------- | |||
MSG_END = -------- end -------- | |||
MSG_SIZE_BEFORE = Size before: | |||
MSG_SIZE_AFTER = Size after: | |||
MSG_COFF = Converting to AVR COFF: | |||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: | |||
MSG_FLASH = Creating load file for Flash: | |||
MSG_EEPROM = Creating load file for EEPROM: | |||
MSG_EXTENDED_LISTING = Creating Extended Listing: | |||
MSG_SYMBOL_TABLE = Creating Symbol Table: | |||
MSG_LINKING = Linking: | |||
MSG_COMPILING = Compiling C: | |||
MSG_COMPILING_CPP = Compiling C++: | |||
MSG_ASSEMBLING = Assembling: | |||
MSG_CLEANING = Cleaning project: | |||
MSG_CREATING_LIBRARY = Creating library: | |||
# Define all object files. | |||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) | |||
# Define all listing files. | |||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) | |||
# Compiler flags to generate dependency files. | |||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d | |||
# Combine all necessary flags and optional flags. | |||
# Add target processor to flags. | |||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) | |||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) | |||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) | |||
# Default target. | |||
all: begin gccversion sizebefore build sizeafter end | |||
depend: tmk.c | |||
@echo $< | |||
@echo $(<F) | |||
# $(CC) -E $(ALL_CFLAGS) $< | |||
# Change the build target to build a HEX file or a library. | |||
build: elf hex eep lss sym | |||
#build: lib | |||
elf: $(TARGET).elf | |||
hex: $(TARGET).hex | |||
eep: $(TARGET).eep | |||
lss: $(TARGET).lss | |||
sym: $(TARGET).sym | |||
LIBNAME=lib$(TARGET).a | |||
lib: $(LIBNAME) | |||
# Eye candy. | |||
# AVR Studio 3.x does not check make's exit code but relies on | |||
# the following magic strings to be generated by the compile job. | |||
begin: | |||
@echo | |||
@echo $(MSG_BEGIN) | |||
end: | |||
@echo $(MSG_END) | |||
@echo | |||
# Display size of file. | |||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex | |||
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf | |||
ELFSIZE = $(SIZE) $(TARGET).elf | |||
sizebefore: | |||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ | |||
2>/dev/null; echo; fi | |||
sizeafter: | |||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ | |||
2>/dev/null; echo; fi | |||
# Display compiler version information. | |||
gccversion : | |||
@$(CC) --version | |||
# Program the device. | |||
program: $(TARGET).hex $(TARGET).eep | |||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) | |||
# Generate avr-gdb config/init file which does the following: | |||
# define the reset signal, load the target file, connect to target, and set | |||
# a breakpoint at main(). | |||
gdb-config: | |||
@$(REMOVE) $(GDBINIT_FILE) | |||
@echo define reset >> $(GDBINIT_FILE) | |||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) | |||
@echo end >> $(GDBINIT_FILE) | |||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) | |||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) | |||
ifeq ($(DEBUG_BACKEND),simulavr) | |||
@echo load >> $(GDBINIT_FILE) | |||
endif | |||
@echo break main >> $(GDBINIT_FILE) | |||
debug: gdb-config $(TARGET).elf | |||
ifeq ($(DEBUG_BACKEND), avarice) | |||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. | |||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ | |||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) | |||
@$(WINSHELL) /c pause | |||
else | |||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ | |||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) | |||
endif | |||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) | |||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. | |||
COFFCONVERT = $(OBJCOPY) --debugging | |||
COFFCONVERT += --change-section-address .data-0x800000 | |||
COFFCONVERT += --change-section-address .bss-0x800000 | |||
COFFCONVERT += --change-section-address .noinit-0x800000 | |||
COFFCONVERT += --change-section-address .eeprom-0x810000 | |||
coff: $(TARGET).elf | |||
@echo | |||
@echo $(MSG_COFF) $(TARGET).cof | |||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof | |||
extcoff: $(TARGET).elf | |||
@echo | |||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof | |||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof | |||
# Create final output files (.hex, .eep) from ELF output file. | |||
%.hex: %.elf | |||
@echo | |||
@echo $(MSG_FLASH) $@ | |||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ | |||
%.eep: %.elf | |||
@echo | |||
@echo $(MSG_EEPROM) $@ | |||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ | |||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 | |||
# Create extended listing file from ELF output file. | |||
%.lss: %.elf | |||
@echo | |||
@echo $(MSG_EXTENDED_LISTING) $@ | |||
$(OBJDUMP) -h -S -z $< > $@ | |||
# Create a symbol table from ELF output file. | |||
%.sym: %.elf | |||
@echo | |||
@echo $(MSG_SYMBOL_TABLE) $@ | |||
$(NM) -n $< > $@ | |||
# Create library from object files. | |||
.SECONDARY : $(TARGET).a | |||
.PRECIOUS : $(OBJ) | |||
%.a: $(OBJ) | |||
@echo | |||
@echo $(MSG_CREATING_LIBRARY) $@ | |||
$(AR) $@ $(OBJ) | |||
# Link: create ELF output file from object files. | |||
.SECONDARY : $(TARGET).elf | |||
.PRECIOUS : $(OBJ) | |||
%.elf: $(OBJ) | |||
@echo | |||
@echo $(MSG_LINKING) $@ | |||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) | |||
# Compile: create object files from C source files. | |||
$(OBJDIR)/%.o : %.c | |||
@echo | |||
@echo $(MSG_COMPILING) $< | |||
$(CC) -c $(ALL_CFLAGS) $< -o $@ | |||
# Compile: create object files from C++ source files. | |||
$(OBJDIR)/%.o : %.cpp | |||
@echo | |||
@echo $(MSG_COMPILING_CPP) $< | |||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ | |||
# Compile: create assembler files from C source files. | |||
%.s : %.c | |||
$(CC) -S $(ALL_CFLAGS) $< -o $@ | |||
# Compile: create assembler files from C++ source files. | |||
%.s : %.cpp | |||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ | |||
# Assemble: create object files from assembler source files. | |||
$(OBJDIR)/%.o : %.S | |||
@echo | |||
@echo $(MSG_ASSEMBLING) $< | |||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ | |||
# Create preprocessed source for use in sending a bug report. | |||
%.i : %.c | |||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ | |||
# Target: clean project. | |||
clean: begin clean_list end | |||
clean_list : | |||
@echo | |||
@echo $(MSG_CLEANING) | |||
$(REMOVE) $(TARGET).hex | |||
$(REMOVE) $(TARGET).eep | |||
$(REMOVE) $(TARGET).cof | |||
$(REMOVE) $(TARGET).elf | |||
$(REMOVE) $(TARGET).map | |||
$(REMOVE) $(TARGET).sym | |||
$(REMOVE) $(TARGET).lss | |||
$(REMOVE) $(ALL_SRC:%.c=$(OBJDIR)/%.o) | |||
$(REMOVE) $(ALL_SRC:%.c=$(OBJDIR)/%.lst) | |||
$(REMOVE) $(ALL_SRC:.c=.s) | |||
$(REMOVE) $(ALL_SRC:.c=.d) | |||
$(REMOVE) $(ALL_SRC:.c=.i) | |||
$(REMOVEDIR) .dep | |||
# Create object files directory | |||
$(shell mkdir $(OBJDIR) 2>/dev/null) | |||
# Include the dependency files. | |||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) | |||
# Listing of phony targets. | |||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ | |||
build elf hex eep lss sym coff extcoff \ | |||
clean clean_list program debug gdb-config | |||
include $(COMMON_DIR)/Makefile.rules |
@@ -0,0 +1,28 @@ | |||
# Following variables need to be set in <target>/Makefile: | |||
# TARGET | |||
# COMMON_DIR | |||
# TARGET_DIR | |||
# TARGET_SRC | |||
# MCU | |||
# F_CPU | |||
# List C source files here. (C dependencies are automatically generated.) | |||
SRC = usb_keyboard.c \ | |||
usb_debug.c \ | |||
usb.c \ | |||
jump_bootloader.c | |||
SRC += $(TARGET_SRC) | |||
# Option modules | |||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||
SRC += usb_mouse.c | |||
endif | |||
ifdef USB_EXTRA_ENABLE | |||
SRC += usb_extra.c | |||
endif | |||
# C source file search path | |||
VPATH = $(TARGET_DIR):$(COMMON_DIR):$(COMMON_DIR)/pjrc |
@@ -0,0 +1,600 @@ | |||
# Hey Emacs, this is a -*- makefile -*- | |||
#---------------------------------------------------------------------------- | |||
# WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al. | |||
# | |||
# Released to the Public Domain | |||
# | |||
# Additional material for this makefile was written by: | |||
# Peter Fleury | |||
# Tim Henigan | |||
# Colin O'Flynn | |||
# Reiner Patommel | |||
# Markus Pfaff | |||
# Sander Pool | |||
# Frederik Rouleau | |||
# Carlos Lamas | |||
# | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device, using avrdude. | |||
# Please customize the avrdude settings below first! | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Output format. (can be srec, ihex, binary) | |||
FORMAT = ihex | |||
# Object files directory | |||
# To put object files in current directory, use a dot (.), do NOT make | |||
# this an empty or blank macro! | |||
OBJDIR = obj | |||
# Optimization level, can be [0, 1, 2, 3, s]. | |||
# 0 = turn off optimization. s = optimize for size. | |||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) | |||
OPT = s | |||
# Debugging format. | |||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. | |||
# AVR Studio 4.10 requires dwarf-2. | |||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. | |||
DEBUG = dwarf-2 | |||
# List any extra directories to look for include files here. | |||
# Each directory must be seperated by a space. | |||
# Use forward slashes for directory separators. | |||
# For a directory that has spaces, enclose it in quotes. | |||
EXTRAINCDIRS = $(subst :, ,$(VPATH)) | |||
# Compiler flag to set the C Standard level. | |||
# c89 = "ANSI" C | |||
# gnu89 = c89 plus GCC extensions | |||
# c99 = ISO C99 standard (not yet fully implemented) | |||
# gnu99 = c99 plus GCC extensions | |||
CSTANDARD = -std=gnu99 | |||
ifdef MOUSEKEY_ENABLE | |||
OPT_DEFS += -DMOUSEKEY_ENABLE | |||
endif | |||
ifdef PS2_MOUSE_ENABLE | |||
OPT_DEFS += -DPS2_MOUSE_ENABLE | |||
endif | |||
ifdef USB_EXTRA_ENABLE | |||
OPT_DEFS += -DUSB_EXTRA_ENABLE | |||
endif | |||
ifdef USB_NKRO_ENABLE | |||
OPT_DEFS += -DUSB_NKRO_ENABLE | |||
endif | |||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||
OPT_DEFS += -DUSB_MOUSE_ENABLE | |||
endif | |||
# Place -D or -U options here for C sources | |||
CDEFS = -DF_CPU=$(F_CPU)UL | |||
CDEFS += $(OPT_DEFS) | |||
# Place -D or -U options here for ASM sources | |||
ADEFS = -DF_CPU=$(F_CPU) | |||
ADEFS += $(OPT_DEFS) | |||
# Place -D or -U options here for C++ sources | |||
CPPDEFS = -DF_CPU=$(F_CPU)UL | |||
#CPPDEFS += -D__STDC_LIMIT_MACROS | |||
#CPPDEFS += -D__STDC_CONSTANT_MACROS | |||
CPPDEFS += $(OPT_DEFS) | |||
#---------------- Compiler Options C ---------------- | |||
# -g*: generate debugging information | |||
# -O*: optimization level | |||
# -f...: tuning, see GCC manual and avr-libc documentation | |||
# -Wall...: warning level | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns...: create assembler listing | |||
CFLAGS = -g$(DEBUG) | |||
CFLAGS += $(CDEFS) | |||
CFLAGS += -O$(OPT) | |||
CFLAGS += -funsigned-char | |||
CFLAGS += -funsigned-bitfields | |||
CFLAGS += -ffunction-sections | |||
CFLAGS += -fpack-struct | |||
CFLAGS += -fshort-enums | |||
CFLAGS += -Wall | |||
CFLAGS += -Wstrict-prototypes | |||
#CFLAGS += -mshort-calls | |||
#CFLAGS += -fno-unit-at-a-time | |||
#CFLAGS += -Wundef | |||
#CFLAGS += -Wunreachable-code | |||
#CFLAGS += -Wsign-compare | |||
CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) | |||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) | |||
CFLAGS += $(CSTANDARD) | |||
CFLAGS += -include config.h | |||
#---------------- Compiler Options C++ ---------------- | |||
# -g*: generate debugging information | |||
# -O*: optimization level | |||
# -f...: tuning, see GCC manual and avr-libc documentation | |||
# -Wall...: warning level | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns...: create assembler listing | |||
CPPFLAGS = -g$(DEBUG) | |||
CPPFLAGS += $(CPPDEFS) | |||
CPPFLAGS += -O$(OPT) | |||
CPPFLAGS += -funsigned-char | |||
CPPFLAGS += -funsigned-bitfields | |||
CPPFLAGS += -fpack-struct | |||
CPPFLAGS += -fshort-enums | |||
CPPFLAGS += -fno-exceptions | |||
CPPFLAGS += -Wall | |||
CPPFLAGS += -Wundef | |||
#CPPFLAGS += -mshort-calls | |||
#CPPFLAGS += -fno-unit-at-a-time | |||
#CPPFLAGS += -Wstrict-prototypes | |||
#CPPFLAGS += -Wunreachable-code | |||
#CPPFLAGS += -Wsign-compare | |||
CPPFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) | |||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) | |||
#CPPFLAGS += $(CSTANDARD) | |||
CPPFLAGS += -include config.h | |||
#---------------- Assembler Options ---------------- | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns: create listing | |||
# -gstabs: have the assembler create line number information; note that | |||
# for use in COFF files, additional information about filenames | |||
# and function names needs to be present in the assembler source | |||
# files -- see avr-libc docs [FIXME: not yet described there] | |||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex | |||
# dump that will be displayed for a given single line of source input. | |||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 | |||
ASFLAGS += -include config.h | |||
#---------------- Library Options ---------------- | |||
# Minimalistic printf version | |||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min | |||
# Floating point printf version (requires MATH_LIB = -lm below) | |||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt | |||
# If this is left blank, then it will use the Standard printf version. | |||
PRINTF_LIB = | |||
#PRINTF_LIB = $(PRINTF_LIB_MIN) | |||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) | |||
# Minimalistic scanf version | |||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min | |||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) | |||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt | |||
# If this is left blank, then it will use the Standard scanf version. | |||
SCANF_LIB = | |||
#SCANF_LIB = $(SCANF_LIB_MIN) | |||
#SCANF_LIB = $(SCANF_LIB_FLOAT) | |||
MATH_LIB = -lm | |||
# List any extra directories to look for libraries here. | |||
# Each directory must be seperated by a space. | |||
# Use forward slashes for directory separators. | |||
# For a directory that has spaces, enclose it in quotes. | |||
EXTRALIBDIRS = | |||
#---------------- External Memory Options ---------------- | |||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), | |||
# used for variables (.data/.bss) and heap (malloc()). | |||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff | |||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), | |||
# only used for heap (malloc()). | |||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff | |||
EXTMEMOPTS = | |||
#---------------- Linker Options ---------------- | |||
# -Wl,...: tell GCC to pass this to linker. | |||
# -Map: create map file | |||
# --cref: add cross reference to map file | |||
# | |||
# Comennt out "--relax" option to avoid a error such: | |||
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' | |||
# | |||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref | |||
LDFLAGS += -Wl,--relax | |||
LDFLAGS += -Wl,--gc-sections | |||
LDFLAGS += $(EXTMEMOPTS) | |||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) | |||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) | |||
#LDFLAGS += -T linker_script.x | |||
#---------------- Programming Options (avrdude) ---------------- | |||
# Programming hardware | |||
# Type: avrdude -c ? | |||
# to get a full listing. | |||
# | |||
AVRDUDE_PROGRAMMER = stk500v2 | |||
# com1 = serial port. Use lpt1 to connect to parallel port. | |||
AVRDUDE_PORT = com1 # programmer connected to serial device | |||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex | |||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep | |||
# Uncomment the following if you want avrdude's erase cycle counter. | |||
# Note that this counter needs to be initialized first using -Yn, | |||
# see avrdude manual. | |||
#AVRDUDE_ERASE_COUNTER = -y | |||
# Uncomment the following if you do /not/ wish a verification to be | |||
# performed after programming the device. | |||
#AVRDUDE_NO_VERIFY = -V | |||
# Increase verbosity level. Please use this when submitting bug | |||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> | |||
# to submit bug reports. | |||
#AVRDUDE_VERBOSE = -v -v | |||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) | |||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) | |||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) | |||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) | |||
#---------------- Debugging Options ---------------- | |||
# For simulavr only - target MCU frequency. | |||
DEBUG_MFREQ = $(F_CPU) | |||
# Set the DEBUG_UI to either gdb or insight. | |||
# DEBUG_UI = gdb | |||
DEBUG_UI = insight | |||
# Set the debugging back-end to either avarice, simulavr. | |||
DEBUG_BACKEND = avarice | |||
#DEBUG_BACKEND = simulavr | |||
# GDB Init Filename. | |||
GDBINIT_FILE = __avr_gdbinit | |||
# When using avarice settings for the JTAG | |||
JTAG_DEV = /dev/com1 | |||
# Debugging port used to communicate between GDB / avarice / simulavr. | |||
DEBUG_PORT = 4242 | |||
# Debugging host used to communicate between GDB / avarice / simulavr, normally | |||
# just set to localhost unless doing some sort of crazy debugging when | |||
# avarice is running on a different computer. | |||
DEBUG_HOST = localhost | |||
#============================================================================ | |||
# Define programs and commands. | |||
SHELL = sh | |||
CC = avr-gcc | |||
OBJCOPY = avr-objcopy | |||
OBJDUMP = avr-objdump | |||
SIZE = avr-size | |||
AR = avr-ar rcs | |||
NM = avr-nm | |||
AVRDUDE = avrdude | |||
REMOVE = rm -f | |||
REMOVEDIR = rmdir | |||
COPY = cp | |||
WINSHELL = cmd | |||
# Define Messages | |||
# English | |||
MSG_ERRORS_NONE = Errors: none | |||
MSG_BEGIN = -------- begin -------- | |||
MSG_END = -------- end -------- | |||
MSG_SIZE_BEFORE = Size before: | |||
MSG_SIZE_AFTER = Size after: | |||
MSG_COFF = Converting to AVR COFF: | |||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: | |||
MSG_FLASH = Creating load file for Flash: | |||
MSG_EEPROM = Creating load file for EEPROM: | |||
MSG_EXTENDED_LISTING = Creating Extended Listing: | |||
MSG_SYMBOL_TABLE = Creating Symbol Table: | |||
MSG_LINKING = Linking: | |||
MSG_COMPILING = Compiling C: | |||
MSG_COMPILING_CPP = Compiling C++: | |||
MSG_ASSEMBLING = Assembling: | |||
MSG_CLEANING = Cleaning project: | |||
MSG_CREATING_LIBRARY = Creating library: | |||
# Define all object files. | |||
OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC)))) | |||
# Define all listing files. | |||
LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC)))) | |||
# Compiler flags to generate dependency files. | |||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d | |||
# Combine all necessary flags and optional flags. | |||
# Add target processor to flags. | |||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) | |||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) | |||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) | |||
# Default target. | |||
all: begin gccversion sizebefore build sizeafter end | |||
# Change the build target to build a HEX file or a library. | |||
build: elf hex eep lss sym | |||
#build: lib | |||
elf: $(TARGET).elf | |||
hex: $(TARGET).hex | |||
eep: $(TARGET).eep | |||
lss: $(TARGET).lss | |||
sym: $(TARGET).sym | |||
LIBNAME=lib$(TARGET).a | |||
lib: $(LIBNAME) | |||
# Eye candy. | |||
# AVR Studio 3.x does not check make's exit code but relies on | |||
# the following magic strings to be generated by the compile job. | |||
begin: | |||
@echo | |||
@echo $(MSG_BEGIN) | |||
end: | |||
@echo $(MSG_END) | |||
@echo | |||
# Display size of file. | |||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex | |||
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf | |||
ELFSIZE = $(SIZE) $(TARGET).elf | |||
sizebefore: | |||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ | |||
2>/dev/null; echo; fi | |||
sizeafter: | |||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ | |||
2>/dev/null; echo; fi | |||
# Display compiler version information. | |||
gccversion : | |||
@$(CC) --version | |||
# Program the device. | |||
program: $(TARGET).hex $(TARGET).eep | |||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) | |||
# Generate avr-gdb config/init file which does the following: | |||
# define the reset signal, load the target file, connect to target, and set | |||
# a breakpoint at main(). | |||
gdb-config: | |||
@$(REMOVE) $(GDBINIT_FILE) | |||
@echo define reset >> $(GDBINIT_FILE) | |||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) | |||
@echo end >> $(GDBINIT_FILE) | |||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) | |||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) | |||
ifeq ($(DEBUG_BACKEND),simulavr) | |||
@echo load >> $(GDBINIT_FILE) | |||
endif | |||
@echo break main >> $(GDBINIT_FILE) | |||
debug: gdb-config $(TARGET).elf | |||
ifeq ($(DEBUG_BACKEND), avarice) | |||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. | |||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ | |||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) | |||
@$(WINSHELL) /c pause | |||
else | |||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ | |||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) | |||
endif | |||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) | |||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. | |||
COFFCONVERT = $(OBJCOPY) --debugging | |||
COFFCONVERT += --change-section-address .data-0x800000 | |||
COFFCONVERT += --change-section-address .bss-0x800000 | |||
COFFCONVERT += --change-section-address .noinit-0x800000 | |||
COFFCONVERT += --change-section-address .eeprom-0x810000 | |||
coff: $(TARGET).elf | |||
@echo | |||
@echo $(MSG_COFF) $(TARGET).cof | |||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof | |||
extcoff: $(TARGET).elf | |||
@echo | |||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof | |||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof | |||
# Create final output files (.hex, .eep) from ELF output file. | |||
%.hex: %.elf | |||
@echo | |||
@echo $(MSG_FLASH) $@ | |||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ | |||
%.eep: %.elf | |||
@echo | |||
@echo $(MSG_EEPROM) $@ | |||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ | |||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 | |||
# Create extended listing file from ELF output file. | |||
%.lss: %.elf | |||
@echo | |||
@echo $(MSG_EXTENDED_LISTING) $@ | |||
$(OBJDUMP) -h -S -z $< > $@ | |||
# Create a symbol table from ELF output file. | |||
%.sym: %.elf | |||
@echo | |||
@echo $(MSG_SYMBOL_TABLE) $@ | |||
$(NM) -n $< > $@ | |||
# Create library from object files. | |||
.SECONDARY : $(TARGET).a | |||
.PRECIOUS : $(OBJ) | |||
%.a: $(OBJ) | |||
@echo | |||
@echo $(MSG_CREATING_LIBRARY) $@ | |||
$(AR) $@ $(OBJ) | |||
# Link: create ELF output file from object files. | |||
.SECONDARY : $(TARGET).elf | |||
.PRECIOUS : $(OBJ) | |||
%.elf: $(OBJ) | |||
@echo | |||
@echo $(MSG_LINKING) $@ | |||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) | |||
# Compile: create object files from C source files. | |||
$(OBJDIR)/%.o : %.c | |||
@echo | |||
@echo $(MSG_COMPILING) $< | |||
$(CC) -c $(ALL_CFLAGS) $< -o $@ | |||
# Compile: create object files from C++ source files. | |||
$(OBJDIR)/%.o : %.cpp | |||
@echo | |||
@echo $(MSG_COMPILING_CPP) $< | |||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ | |||
# Compile: create assembler files from C source files. | |||
%.s : %.c | |||
$(CC) -S $(ALL_CFLAGS) $< -o $@ | |||
# Compile: create assembler files from C++ source files. | |||
%.s : %.cpp | |||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ | |||
# Assemble: create object files from assembler source files. | |||
$(OBJDIR)/%.o : %.S | |||
@echo | |||
@echo $(MSG_ASSEMBLING) $< | |||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ | |||
# Create preprocessed source for use in sending a bug report. | |||
%.i : %.c | |||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ | |||
# Target: clean project. | |||
clean: begin clean_list end | |||
clean_list : | |||
@echo | |||
$(REMOVE) $(TARGET).hex | |||
$(REMOVE) $(TARGET).eep | |||
$(REMOVE) $(TARGET).cof | |||
$(REMOVE) $(TARGET).elf | |||
$(REMOVE) $(TARGET).map | |||
$(REMOVE) $(TARGET).sym | |||
$(REMOVE) $(TARGET).lss | |||
$(REMOVE) $(OBJ) | |||
$(REMOVE) $(LST) | |||
$(REMOVE) $(OBJ:.o=.s) | |||
$(REMOVE) $(OBJ:.o=.i) | |||
$(REMOVE) -r .dep | |||
$(REMOVEDIR) $(OBJDIR) | |||
# Create object files directory | |||
$(shell mkdir $(OBJDIR) 2>/dev/null) | |||
# Include the dependency files. | |||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) | |||
# Listing of phony targets. | |||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ | |||
build elf hex eep lss sym coff extcoff \ | |||
clean clean_list program debug gdb-config | |||
@@ -1,28 +1,3 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device, using avrdude. | |||
# Please customize the avrdude settings below first! | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Following variables need to be set in <target>/Makefile: | |||
# TARGET | |||
# COMMON_DIR | |||
@@ -38,582 +13,6 @@ SRC = usbdrv.c \ | |||
oddebug.c | |||
SRC += $(TARGET_SRC) | |||
# Option modules | |||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||
SRC += usb_mouse.c | |||
endif | |||
ifdef MOUSEKEY_ENABLE | |||
SRC += mousekey.c | |||
endif | |||
ifdef PS2_MOUSE_ENABLE | |||
SRC += ps2.c \ | |||
ps2_mouse.c | |||
endif | |||
ifdef USB_EXTRA_ENABLE | |||
SRC += usb_extra.c | |||
endif | |||
# C source file search path | |||
VPATH = $(TARGET_DIR):$(COMMON_DIR):$(COMMON_DIR)/usbdrv | |||
# Output format. (can be srec, ihex, binary) | |||
FORMAT = ihex | |||
# Object files directory | |||
# To put object files in current directory, use a dot (.), do NOT make | |||
# this an empty or blank macro! | |||
OBJDIR = obj | |||
# Optimization level, can be [0, 1, 2, 3, s]. | |||
# 0 = turn off optimization. s = optimize for size. | |||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) | |||
OPT = s | |||
# Debugging format. | |||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. | |||
# AVR Studio 4.10 requires dwarf-2. | |||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. | |||
DEBUG = dwarf-2 | |||
# List any extra directories to look for include files here. | |||
# Each directory must be seperated by a space. | |||
# Use forward slashes for directory separators. | |||
# For a directory that has spaces, enclose it in quotes. | |||
#EXTRAINCDIRS = $(TARGET_DIR) $(COMMON_DIR) | |||
EXTRAINCDIRS = $(subst :, ,$(VPATH)) | |||
# Compiler flag to set the C Standard level. | |||
# c89 = "ANSI" C | |||
# gnu89 = c89 plus GCC extensions | |||
# c99 = ISO C99 standard (not yet fully implemented) | |||
# gnu99 = c99 plus GCC extensions | |||
CSTANDARD = -std=gnu99 | |||
#OPT_DEFS = | |||
ifdef MOUSEKEY_ENABLE | |||
OPT_DEFS += -DMOUSEKEY_ENABLE | |||
endif | |||
ifdef PS2_MOUSE_ENABLE | |||
OPT_DEFS += -DPS2_MOUSE_ENABLE | |||
endif | |||
ifdef USB_EXTRA_ENABLE | |||
OPT_DEFS += -DUSB_EXTRA_ENABLE | |||
endif | |||
ifdef USB_NKRO_ENABLE | |||
OPT_DEFS += -DUSB_NKRO_ENABLE | |||
endif | |||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||
OPT_DEFS += -DUSB_MOUSE_ENABLE | |||
endif | |||
# Place -D or -U options here for C sources | |||
CDEFS = -DF_CPU=$(F_CPU)UL | |||
CDEFS += $(OPT_DEFS) | |||
# Place -D or -U options here for ASM sources | |||
ADEFS = -DF_CPU=$(F_CPU) | |||
ADEFS += $(OPT_DEFS) | |||
# Place -D or -U options here for C++ sources | |||
CPPDEFS = -DF_CPU=$(F_CPU)UL | |||
#CPPDEFS += -D__STDC_LIMIT_MACROS | |||
#CPPDEFS += -D__STDC_CONSTANT_MACROS | |||
CPPDEFS += $(OPT_DEFS) | |||
#---------------- Compiler Options C ---------------- | |||
# -g*: generate debugging information | |||
# -O*: optimization level | |||
# -f...: tuning, see GCC manual and avr-libc documentation | |||
# -Wall...: warning level | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns...: create assembler listing | |||
CFLAGS = -g$(DEBUG) | |||
CFLAGS += $(CDEFS) | |||
CFLAGS += -O$(OPT) | |||
CFLAGS += -funsigned-char | |||
CFLAGS += -funsigned-bitfields | |||
CFLAGS += -ffunction-sections | |||
CFLAGS += -fpack-struct | |||
CFLAGS += -fshort-enums | |||
CFLAGS += -Wall | |||
CFLAGS += -Wstrict-prototypes | |||
#CFLAGS += -mshort-calls | |||
#CFLAGS += -fno-unit-at-a-time | |||
#CFLAGS += -Wundef | |||
#CFLAGS += -Wunreachable-code | |||
#CFLAGS += -Wsign-compare | |||
CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) | |||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) | |||
CFLAGS += $(CSTANDARD) | |||
CFLAGS += -include config.h | |||
#---------------- Compiler Options C++ ---------------- | |||
# -g*: generate debugging information | |||
# -O*: optimization level | |||
# -f...: tuning, see GCC manual and avr-libc documentation | |||
# -Wall...: warning level | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns...: create assembler listing | |||
CPPFLAGS = -g$(DEBUG) | |||
CPPFLAGS += $(CPPDEFS) | |||
CPPFLAGS += -O$(OPT) | |||
CPPFLAGS += -funsigned-char | |||
CPPFLAGS += -funsigned-bitfields | |||
CPPFLAGS += -fpack-struct | |||
CPPFLAGS += -fshort-enums | |||
CPPFLAGS += -fno-exceptions | |||
CPPFLAGS += -Wall | |||
CPPFLAGS += -Wundef | |||
#CPPFLAGS += -mshort-calls | |||
#CPPFLAGS += -fno-unit-at-a-time | |||
#CPPFLAGS += -Wstrict-prototypes | |||
#CPPFLAGS += -Wunreachable-code | |||
#CPPFLAGS += -Wsign-compare | |||
CPPFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) | |||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) | |||
#CPPFLAGS += $(CSTANDARD) | |||
CPPFLAGS += -include config.h | |||
#---------------- Assembler Options ---------------- | |||
# -Wa,...: tell GCC to pass this to the assembler. | |||
# -adhlns: create listing | |||
# -gstabs: have the assembler create line number information; note that | |||
# for use in COFF files, additional information about filenames | |||
# and function names needs to be present in the assembler source | |||
# files -- see avr-libc docs [FIXME: not yet described there] | |||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex | |||
# dump that will be displayed for a given single line of source input. | |||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 | |||
ASFLAGS += -include config.h | |||
#---------------- Library Options ---------------- | |||
# Minimalistic printf version | |||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min | |||
# Floating point printf version (requires MATH_LIB = -lm below) | |||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt | |||
# If this is left blank, then it will use the Standard printf version. | |||
PRINTF_LIB = | |||
#PRINTF_LIB = $(PRINTF_LIB_MIN) | |||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) | |||
# Minimalistic scanf version | |||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min | |||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) | |||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt | |||
# If this is left blank, then it will use the Standard scanf version. | |||
SCANF_LIB = | |||
#SCANF_LIB = $(SCANF_LIB_MIN) | |||
#SCANF_LIB = $(SCANF_LIB_FLOAT) | |||
MATH_LIB = -lm | |||
# List any extra directories to look for libraries here. | |||
# Each directory must be seperated by a space. | |||
# Use forward slashes for directory separators. | |||
# For a directory that has spaces, enclose it in quotes. | |||
EXTRALIBDIRS = | |||
#---------------- External Memory Options ---------------- | |||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), | |||
# used for variables (.data/.bss) and heap (malloc()). | |||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff | |||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), | |||
# only used for heap (malloc()). | |||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff | |||
EXTMEMOPTS = | |||
#---------------- Linker Options ---------------- | |||
# -Wl,...: tell GCC to pass this to linker. | |||
# -Map: create map file | |||
# --cref: add cross reference to map file | |||
# | |||
# Comennt out "--relax" option to avoid a error such: | |||
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' | |||
# | |||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref | |||
LDFLAGS += -Wl,--relax | |||
LDFLAGS += -Wl,--gc-sections | |||
LDFLAGS += $(EXTMEMOPTS) | |||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) | |||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) | |||
#LDFLAGS += -T linker_script.x | |||
#---------------- Programming Options (avrdude) ---------------- | |||
# Programming hardware | |||
# Type: avrdude -c ? | |||
# to get a full listing. | |||
# | |||
AVRDUDE_PROGRAMMER = stk500v2 | |||
# com1 = serial port. Use lpt1 to connect to parallel port. | |||
AVRDUDE_PORT = com1 # programmer connected to serial device | |||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex | |||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep | |||
# Uncomment the following if you want avrdude's erase cycle counter. | |||
# Note that this counter needs to be initialized first using -Yn, | |||
# see avrdude manual. | |||
#AVRDUDE_ERASE_COUNTER = -y | |||
# Uncomment the following if you do /not/ wish a verification to be | |||
# performed after programming the device. | |||
#AVRDUDE_NO_VERIFY = -V | |||
# Increase verbosity level. Please use this when submitting bug | |||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> | |||
# to submit bug reports. | |||
#AVRDUDE_VERBOSE = -v -v | |||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) | |||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) | |||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) | |||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) | |||
#---------------- Debugging Options ---------------- | |||
# For simulavr only - target MCU frequency. | |||
DEBUG_MFREQ = $(F_CPU) | |||
# Set the DEBUG_UI to either gdb or insight. | |||
# DEBUG_UI = gdb | |||
DEBUG_UI = insight | |||
# Set the debugging back-end to either avarice, simulavr. | |||
DEBUG_BACKEND = avarice | |||
#DEBUG_BACKEND = simulavr | |||
# GDB Init Filename. | |||
GDBINIT_FILE = __avr_gdbinit | |||
# When using avarice settings for the JTAG | |||
JTAG_DEV = /dev/com1 | |||
# Debugging port used to communicate between GDB / avarice / simulavr. | |||
DEBUG_PORT = 4242 | |||
# Debugging host used to communicate between GDB / avarice / simulavr, normally | |||
# just set to localhost unless doing some sort of crazy debugging when | |||
# avarice is running on a different computer. | |||
DEBUG_HOST = localhost | |||
#============================================================================ | |||
# Define programs and commands. | |||
SHELL = sh | |||
CC = avr-gcc | |||
OBJCOPY = avr-objcopy | |||
OBJDUMP = avr-objdump | |||
SIZE = avr-size | |||
AR = avr-ar rcs | |||
NM = avr-nm | |||
AVRDUDE = avrdude | |||
REMOVE = rm -f | |||
REMOVEDIR = rmdir | |||
COPY = cp | |||
WINSHELL = cmd | |||
# Define Messages | |||
# English | |||
MSG_ERRORS_NONE = Errors: none | |||
MSG_BEGIN = -------- begin -------- | |||
MSG_END = -------- end -------- | |||
MSG_SIZE_BEFORE = Size before: | |||
MSG_SIZE_AFTER = Size after: | |||
MSG_COFF = Converting to AVR COFF: | |||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: | |||
MSG_FLASH = Creating load file for Flash: | |||
MSG_EEPROM = Creating load file for EEPROM: | |||
MSG_EXTENDED_LISTING = Creating Extended Listing: | |||
MSG_SYMBOL_TABLE = Creating Symbol Table: | |||
MSG_LINKING = Linking: | |||
MSG_COMPILING = Compiling C: | |||
MSG_COMPILING_CPP = Compiling C++: | |||
MSG_ASSEMBLING = Assembling: | |||
MSG_CLEANING = Cleaning project: | |||
MSG_CREATING_LIBRARY = Creating library: | |||
# Define all object files. | |||
OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC)))) | |||
# Define all listing files. | |||
LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC)))) | |||
# Compiler flags to generate dependency files. | |||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d | |||
# Combine all necessary flags and optional flags. | |||
# Add target processor to flags. | |||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) | |||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) | |||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) | |||
# Default target. | |||
all: begin gccversion sizebefore build sizeafter end | |||
# Change the build target to build a HEX file or a library. | |||
build: elf hex eep lss sym | |||
#build: lib | |||
elf: $(TARGET).elf | |||
hex: $(TARGET).hex | |||
eep: $(TARGET).eep | |||
lss: $(TARGET).lss | |||
sym: $(TARGET).sym | |||
LIBNAME=lib$(TARGET).a | |||
lib: $(LIBNAME) | |||
# Eye candy. | |||
# AVR Studio 3.x does not check make's exit code but relies on | |||
# the following magic strings to be generated by the compile job. | |||
begin: | |||
@echo | |||
@echo $(MSG_BEGIN) | |||
end: | |||
@echo $(MSG_END) | |||
@echo | |||
# Display size of file. | |||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex | |||
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf | |||
ELFSIZE = $(SIZE) $(TARGET).elf | |||
sizebefore: | |||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ | |||
2>/dev/null; echo; fi | |||
sizeafter: | |||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ | |||
2>/dev/null; echo; fi | |||
# Display compiler version information. | |||
gccversion : | |||
@$(CC) --version | |||
# Program the device. | |||
program: $(TARGET).hex $(TARGET).eep | |||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) | |||
# Generate avr-gdb config/init file which does the following: | |||
# define the reset signal, load the target file, connect to target, and set | |||
# a breakpoint at main(). | |||
gdb-config: | |||
@$(REMOVE) $(GDBINIT_FILE) | |||
@echo define reset >> $(GDBINIT_FILE) | |||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) | |||
@echo end >> $(GDBINIT_FILE) | |||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) | |||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) | |||
ifeq ($(DEBUG_BACKEND),simulavr) | |||
@echo load >> $(GDBINIT_FILE) | |||
endif | |||
@echo break main >> $(GDBINIT_FILE) | |||
debug: gdb-config $(TARGET).elf | |||
ifeq ($(DEBUG_BACKEND), avarice) | |||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. | |||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ | |||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) | |||
@$(WINSHELL) /c pause | |||
else | |||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ | |||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) | |||
endif | |||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) | |||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. | |||
COFFCONVERT = $(OBJCOPY) --debugging | |||
COFFCONVERT += --change-section-address .data-0x800000 | |||
COFFCONVERT += --change-section-address .bss-0x800000 | |||
COFFCONVERT += --change-section-address .noinit-0x800000 | |||
COFFCONVERT += --change-section-address .eeprom-0x810000 | |||
coff: $(TARGET).elf | |||
@echo | |||
@echo $(MSG_COFF) $(TARGET).cof | |||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof | |||
extcoff: $(TARGET).elf | |||
@echo | |||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof | |||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof | |||
# Create final output files (.hex, .eep) from ELF output file. | |||
%.hex: %.elf | |||
@echo | |||
@echo $(MSG_FLASH) $@ | |||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ | |||
%.eep: %.elf | |||
@echo | |||
@echo $(MSG_EEPROM) $@ | |||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ | |||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 | |||
# Create extended listing file from ELF output file. | |||
%.lss: %.elf | |||
@echo | |||
@echo $(MSG_EXTENDED_LISTING) $@ | |||
$(OBJDUMP) -h -S -z $< > $@ | |||
# Create a symbol table from ELF output file. | |||
%.sym: %.elf | |||
@echo | |||
@echo $(MSG_SYMBOL_TABLE) $@ | |||
$(NM) -n $< > $@ | |||
# Create library from object files. | |||
.SECONDARY : $(TARGET).a | |||
.PRECIOUS : $(OBJ) | |||
%.a: $(OBJ) | |||
@echo | |||
@echo $(MSG_CREATING_LIBRARY) $@ | |||
$(AR) $@ $(OBJ) | |||
# Link: create ELF output file from object files. | |||
.SECONDARY : $(TARGET).elf | |||
.PRECIOUS : $(OBJ) | |||
%.elf: $(OBJ) | |||
@echo | |||
@echo $(MSG_LINKING) $@ | |||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) | |||
# Compile: create object files from C source files. | |||
$(OBJDIR)/%.o : %.c | |||
@echo | |||
@echo $(MSG_COMPILING) $< | |||
$(CC) -c $(ALL_CFLAGS) $< -o $@ | |||
# Compile: create object files from C++ source files. | |||
$(OBJDIR)/%.o : %.cpp | |||
@echo | |||
@echo $(MSG_COMPILING_CPP) $< | |||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ | |||
# Compile: create assembler files from C source files. | |||
%.s : %.c | |||
$(CC) -S $(ALL_CFLAGS) $< -o $@ | |||
# Compile: create assembler files from C++ source files. | |||
%.s : %.cpp | |||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ | |||
# Assemble: create object files from assembler source files. | |||
$(OBJDIR)/%.o : %.S | |||
@echo | |||
@echo $(MSG_ASSEMBLING) $< | |||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ | |||
# Create preprocessed source for use in sending a bug report. | |||
%.i : %.c | |||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ | |||
# Target: clean project. | |||
clean: begin clean_list end | |||
clean_list : | |||
@echo | |||
$(REMOVE) $(TARGET).hex | |||
$(REMOVE) $(TARGET).eep | |||
$(REMOVE) $(TARGET).cof | |||
$(REMOVE) $(TARGET).elf | |||
$(REMOVE) $(TARGET).map | |||
$(REMOVE) $(TARGET).sym | |||
$(REMOVE) $(TARGET).lss | |||
$(REMOVE) $(OBJ) | |||
$(REMOVE) $(LST) | |||
$(REMOVE) $(OBJ:.o=.s) | |||
$(REMOVE) $(OBJ:.o=.i) | |||
$(REMOVE) -r .dep | |||
$(REMOVEDIR) $(OBJDIR) | |||
# Create object files directory | |||
$(shell mkdir $(OBJDIR) 2>/dev/null) | |||
# Include the dependency files. | |||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) | |||
# Listing of phony targets. | |||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ | |||
build elf hex eep lss sym coff extcoff \ | |||
clean clean_list program debug gdb-config | |||
VPATH = $(TARGET_DIR):$(COMMON_DIR):$(COMMON_DIR)/vusb:$(COMMON_DIR)/vusb/usbdrv |
@@ -1,46 +1,5 @@ | |||
# Hey Emacs, this is a -*- makefile -*- | |||
#---------------------------------------------------------------------------- | |||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. | |||
# | |||
# Released to the Public Domain | |||
# | |||
# Additional material for this makefile was written by: | |||
# Peter Fleury | |||
# Tim Henigan | |||
# Colin O'Flynn | |||
# Reiner Patommel | |||
# Markus Pfaff | |||
# Sander Pool | |||
# Frederik Rouleau | |||
# Carlos Lamas | |||
# | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device, using avrdude. | |||
# Please customize the avrdude settings below first! | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = tmk_hhkb | |||
TARGET = hhkb | |||
# Directory common source filess exist | |||
COMMON_DIR = .. | |||
@@ -49,8 +8,12 @@ COMMON_DIR = .. | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
TARGET_SRC = keymap.c \ | |||
matrix.c | |||
TARGET_SRC = tmk.c \ | |||
key_process.c \ | |||
host_pjrc.c \ | |||
keymap.c \ | |||
matrix.c \ | |||
led.c | |||
# MCU name, you MUST set this to match the board you are using | |||
@@ -77,4 +40,5 @@ USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System c | |||
USB_NKRO_ENABLE = yes # USB Nkey Rollover | |||
include $(COMMON_DIR)/Makefile.pjrc | |||
include $(COMMON_DIR)/Makefile.common |
@@ -4,7 +4,7 @@ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/pgmspace.h> | |||
#include "usb_keyboard.h" | |||
#include "keyboard.h" | |||
#include "usb_keycodes.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
@@ -177,5 +177,5 @@ uint8_t keymap_fn_keycode(uint8_t fn_bits) | |||
// define a condition to enter special function mode | |||
bool keymap_is_special_mode(uint8_t fn_bits) | |||
{ | |||
return (usb_keyboard_mods == (BIT_LCTRL | BIT_LSHIFT | BIT_LALT | BIT_LGUI)); | |||
return keyboard_get_mods() == (BIT_LSHIFT | BIT_RSHIFT) || keyboard_get_mods() == (BIT_LCTRL | BIT_RSHIFT); | |||
} |
@@ -0,0 +1,93 @@ | |||
#include "usb_keycodes.h" | |||
#include "host.h" | |||
#include "led.h" | |||
#include "keyboard.h" | |||
#include "print.h" | |||
static report_keyboard_t report0; | |||
static report_keyboard_t report1; | |||
report_keyboard_t *keyboard_report = &report0; | |||
report_keyboard_t *keyboard_report_prev = &report1; | |||
void keyboard_set_led(uint8_t usb_led) | |||
{ | |||
led_set(usb_led); | |||
} | |||
void keyboard_send(void) | |||
{ | |||
host_keyboard_send(keyboard_report); | |||
} | |||
void keyboard_add_key(uint8_t code) | |||
{ | |||
int8_t i = 0; | |||
int8_t empty = -1; | |||
for (; i < REPORT_KEYS; i++) { | |||
if (keyboard_report_prev->keys[i] == code) { | |||
keyboard_report->keys[i] = code; | |||
break; | |||
} | |||
if (empty == -1 && keyboard_report_prev->keys[i] == KB_NO && keyboard_report->keys[i] == KB_NO) { | |||
empty = i; | |||
} | |||
} | |||
if (i == REPORT_KEYS && empty != -1) { | |||
keyboard_report->keys[empty] = code; | |||
} | |||
} | |||
void keyboard_add_mod_bit(uint8_t mod) | |||
{ | |||
keyboard_report->mods |= mod; | |||
} | |||
void keyboard_set_mods(uint8_t mods) | |||
{ | |||
keyboard_report->mods = mods; | |||
} | |||
void keyboard_add_code(uint8_t code) | |||
{ | |||
if (IS_MOD(code)) { | |||
keyboard_add_mod_bit(MOD_BIT(code)); | |||
} else { | |||
keyboard_add_key(code); | |||
} | |||
} | |||
void keyboard_swap_report(void) | |||
{ | |||
report_keyboard_t *tmp = keyboard_report_prev; | |||
keyboard_report_prev = keyboard_report; | |||
keyboard_report = tmp; | |||
} | |||
void keyboard_clear_report(void) | |||
{ | |||
keyboard_report->mods = 0; | |||
for (int8_t i = 0; i < REPORT_KEYS; i++) { | |||
keyboard_report->keys[i] = 0; | |||
} | |||
} | |||
uint8_t keyboard_has_anykey(void) | |||
{ | |||
uint8_t cnt = 0; | |||
for (int i = 0; i < REPORT_KEYS; i++) { | |||
if (keyboard_report->keys[i]) | |||
cnt++; | |||
} | |||
return cnt; | |||
} | |||
uint8_t *keyboard_get_keys(void) | |||
{ | |||
return keyboard_report->keys; | |||
} | |||
uint8_t keyboard_get_mods(void) | |||
{ | |||
return keyboard_report->mods; | |||
} |
@@ -0,0 +1,43 @@ | |||
#ifndef KEYBOARD_H | |||
#define KEYBOARD_H | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include "host.h" | |||
/* keyboard Modifiers in boot protocol report */ | |||
#define BIT_LCTRL (1<<0) | |||
#define BIT_LSHIFT (1<<1) | |||
#define BIT_LALT (1<<2) | |||
#define BIT_LGUI (1<<3) | |||
#define BIT_RCTRL (1<<4) | |||
#define BIT_RSHIFT (1<<5) | |||
#define BIT_RALT (1<<6) | |||
#define BIT_RGUI (1<<7) | |||
#define BIT_LCTL BIT_LCTRL | |||
#define BIT_RCTL BIT_RCTRL | |||
#define BIT_LSFT BIT_LSHIFT | |||
#define BIT_RSFT BIT_RSHIFT | |||
extern report_keyboard_t *keyboard_report; | |||
extern report_keyboard_t *keyboard_report_prev; | |||
void keyboard_set_led(uint8_t led); | |||
void keyboard_send(void); | |||
void keyboard_add_key(uint8_t key); | |||
void keyboard_add_mod_bit(uint8_t mod); | |||
void keyboard_set_mods(uint8_t mods); | |||
void keyboard_add_code(uint8_t code); | |||
void keyboard_swap_report(void); | |||
void keyboard_clear_report(void); | |||
uint8_t keyboard_has_anykey(void); | |||
uint8_t *keyboard_get_keys(void); | |||
uint8_t keyboard_get_mods(void); | |||
#endif | |||
@@ -1,5 +1,5 @@ | |||
#include "keymap_skel.h" | |||
#include "usb_keyboard.h" | |||
#include "keyboard.h" | |||
#include "debug.h" | |||
#include "timer.h" | |||
#include "layer.h" | |||
@@ -98,23 +98,23 @@ void layer_switching(uint8_t fn_bits) | |||
debug(" -> "); debug_hex(current_layer); debug("\n"); | |||
} | |||
} else { | |||
if (usb_keyboard_has_key()) { // other keys is pressed | |||
if (keyboard_has_anykey()) { // other keys is pressed | |||
uint8_t _fn_to_send = BIT_SUBT(fn_bits, sent_fn); | |||
if (_fn_to_send) { | |||
debug("Fn case: 4(send Fn before other key pressed)\n"); | |||
// send only Fn key first | |||
usb_keyboard_swap_report(); | |||
usb_keyboard_clear_report(); | |||
usb_keyboard_add_code(keymap_fn_keycode(_fn_to_send)); // TODO: do all Fn keys | |||
usb_keyboard_set_mods(last_mods); | |||
usb_keyboard_send(); | |||
usb_keyboard_swap_report(); | |||
keyboard_swap_report(); | |||
keyboard_clear_report(); | |||
keyboard_add_code(keymap_fn_keycode(_fn_to_send)); // TODO: do all Fn keys | |||
keyboard_set_mods(last_mods); | |||
keyboard_send(); | |||
keyboard_swap_report(); | |||
sent_fn |= _fn_to_send; | |||
} | |||
} | |||
} | |||
// add Fn keys to send | |||
//usb_keyboard_add_code(keymap_fn_keycode(fn_bits&sent_fn)); // TODO: do all Fn keys | |||
//keyboard_add_code(keymap_fn_keycode(fn_bits&sent_fn)); // TODO: do all Fn keys | |||
} | |||
} else { // Fn state is changed(edge) | |||
uint8_t fn_changed = 0; | |||
@@ -128,7 +128,7 @@ void layer_switching(uint8_t fn_bits) | |||
// pressed Fn | |||
if ((fn_changed = BIT_SUBT(fn_bits, last_fn))) { | |||
debug("fn_changed: "); debug_bin(fn_changed); debug("\n"); | |||
if (usb_keyboard_has_key()) { | |||
if (keyboard_has_anykey()) { | |||
debug("Fn case: 5(pressed Fn with other key)\n"); | |||
sent_fn |= fn_changed; | |||
} else if (fn_changed & sent_fn) { // pressed same Fn in a row | |||
@@ -149,12 +149,12 @@ void layer_switching(uint8_t fn_bits) | |||
if (BIT_SUBT(fn_changed, sent_fn)) { // layer not used && Fn not sent | |||
debug("Fn case: 2(send Fn one shot: released Fn during LAYER_SEND_FN_TERM)\n"); | |||
// send only Fn key first | |||
usb_keyboard_swap_report(); | |||
usb_keyboard_clear_report(); | |||
usb_keyboard_add_code(keymap_fn_keycode(fn_changed)); // TODO: do all Fn keys | |||
usb_keyboard_set_mods(last_mods); | |||
usb_keyboard_send(); | |||
usb_keyboard_swap_report(); | |||
keyboard_swap_report(); | |||
keyboard_clear_report(); | |||
keyboard_add_code(keymap_fn_keycode(fn_changed)); // TODO: do all Fn keys | |||
keyboard_set_mods(last_mods); | |||
keyboard_send(); | |||
keyboard_swap_report(); | |||
sent_fn |= fn_changed; | |||
} | |||
} | |||
@@ -165,13 +165,13 @@ void layer_switching(uint8_t fn_bits) | |||
} | |||
last_fn = fn_bits; | |||
last_mods = usb_keyboard_mods; | |||
last_mods = keyboard_report->mods; | |||
last_timer = timer_read(); | |||
} | |||
// send Fn keys | |||
for (uint8_t i = 0; i < 8; i++) { | |||
if ((sent_fn & fn_bits) & (1<<i)) { | |||
usb_keyboard_add_code(keymap_fn_keycode(1<<i)); | |||
keyboard_add_code(keymap_fn_keycode(1<<i)); | |||
} | |||
} | |||
} |
@@ -0,0 +1,16 @@ | |||
#ifndef LED_H | |||
#define LED_H | |||
#include "stdint.h" | |||
/* keyboard LEDs */ | |||
#define USB_LED_NUM_LOCK 0 | |||
#define USB_LED_CAPS_LOCK 1 | |||
#define USB_LED_SCROLL_LOCK 2 | |||
#define USB_LED_COMPOSE 3 | |||
#define USB_LED_KANA 4 | |||
void led_set(uint8_t usb_led); | |||
#endif |
@@ -88,11 +88,4 @@ void usb_remote_wakeup(void); | |||
#define ENDPOINT_HALT 0 | |||
#define TEST_MODE 2 | |||
// LEDS | |||
#define USB_LED_NUM_LOCK 0 | |||
#define USB_LED_CAPS_LOCK 1 | |||
#define USB_LED_SCROLL_LOCK 2 | |||
#define USB_LED_COMPOSE 3 | |||
#define USB_LED_KANA 4 | |||
#endif |
@@ -27,18 +27,6 @@ | |||
#define KEYS_MAX KBD_REPORT_KEYS | |||
#endif | |||
#define BIT_LCTRL (1<<0) | |||
#define BIT_LSHIFT (1<<1) | |||
#define BIT_LALT (1<<2) | |||
#define BIT_LGUI (1<<3) | |||
#define BIT_RCTRL (1<<4) | |||
#define BIT_RSHIFT (1<<5) | |||
#define BIT_RALT (1<<6) | |||
#define BIT_RGUI (1<<7) | |||
#define BIT_LCTL BIT_LCTRL | |||
#define BIT_RCTL BIT_RCTRL | |||
#define BIT_LSFT BIT_LSHIFT | |||
#define BIT_RSFT BIT_RSHIFT | |||
typedef struct report { | |||
uint8_t keys[KEYS_MAX]; |
@@ -9,16 +9,11 @@ TARGET_DIR = . | |||
# keyboard dependent files | |||
TARGET_SRC = main.c \ | |||
keyboard.c \ | |||
mousekey.c \ | |||
layer.c \ | |||
keymap.c \ | |||
matrix.c \ | |||
led.c \ | |||
ps2.c \ | |||
host_vusb.c \ | |||
print.c \ | |||
util.c \ | |||
timer.c \ | |||
usart_print.c | |||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||
@@ -44,9 +39,10 @@ F_CPU = 16000000 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
#MOUSEKEY_ENABLE = yes # Mouse keys | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) | |||
#USB_NKRO_ENABLE = yes # USB Nkey Rollover | |||
include $(COMMON_DIR)/Makefile.vusb | |||
include $(COMMON_DIR)/Makefile.common |
@@ -1,165 +0,0 @@ | |||
# Name: Makefile | |||
# Project: hid-mouse example | |||
# Author: Christian Starkjohann | |||
# Creation Date: 2008-04-07 | |||
# Tabsize: 4 | |||
# Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH | |||
# License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) | |||
# This Revision: $Id: Makefile 692 2008-11-07 15:07:40Z cs $ | |||
DEVICE = atmega168 | |||
F_CPU = 16000000 # in Hz | |||
FUSE_L = # see below for fuse values for particular devices | |||
FUSE_H = | |||
#AVRDUDE = avrdude -c usbasp -p $(DEVICE) # edit this line for your programmer | |||
AVRDUDE = avrdude -P COM1 -b 19200 -c arduino -p $(DEVICE) | |||
CFLAGS = -Iusbdrv -I. -DDEBUG_LEVEL=1 | |||
OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o | |||
COMPILE = avr-gcc -Wall -Os -DF_CPU=$(F_CPU) $(CFLAGS) -mmcu=$(DEVICE) | |||
############################################################################## | |||
# Fuse values for particular devices | |||
############################################################################## | |||
# If your device is not listed here, go to | |||
# http://palmavr.sourceforge.net/cgi-bin/fc.cgi | |||
# and choose options for external crystal clock and no clock divider | |||
# | |||
################################## ATMega8 ################################## | |||
# ATMega8 FUSE_L (Fuse low byte): | |||
# 0x9f = 1 0 0 1 1 1 1 1 | |||
# ^ ^ \ / \--+--/ | |||
# | | | +------- CKSEL 3..0 (external >8M crystal) | |||
# | | +--------------- SUT 1..0 (crystal osc, BOD enabled) | |||
# | +------------------ BODEN (BrownOut Detector enabled) | |||
# +-------------------- BODLEVEL (2.7V) | |||
# ATMega8 FUSE_H (Fuse high byte): | |||
# 0xc9 = 1 1 0 0 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000) | |||
# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0 | |||
# | | | | | +-------- BOOTSZ1 | |||
# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase) | |||
# | | | +-------------- CKOPT (full output swing) | |||
# | | +---------------- SPIEN (allow serial programming) | |||
# | +------------------ WDTON (WDT not always on) | |||
# +-------------------- RSTDISBL (reset pin is enabled) | |||
# | |||
############################## ATMega48/88/168 ############################## | |||
# ATMega*8 FUSE_L (Fuse low byte): | |||
# 0xdf = 1 1 0 1 1 1 1 1 | |||
# ^ ^ \ / \--+--/ | |||
# | | | +------- CKSEL 3..0 (external >8M crystal) | |||
# | | +--------------- SUT 1..0 (crystal osc, BOD enabled) | |||
# | +------------------ CKOUT (if 0: Clock output enabled) | |||
# +-------------------- CKDIV8 (if 0: divide by 8) | |||
# ATMega*8 FUSE_H (Fuse high byte): | |||
# 0xde = 1 1 0 1 1 1 1 0 | |||
# ^ ^ ^ ^ ^ \-+-/ | |||
# | | | | | +------ BODLEVEL 0..2 (110 = 1.8 V) | |||
# | | | | + --------- EESAVE (preserve EEPROM over chip erase) | |||
# | | | +-------------- WDTON (if 0: watchdog always on) | |||
# | | +---------------- SPIEN (allow serial programming) | |||
# | +------------------ DWEN (debug wire enable) | |||
# +-------------------- RSTDISBL (reset pin is enabled) | |||
# | |||
############################## ATTiny25/45/85 ############################### | |||
# ATMega*5 FUSE_L (Fuse low byte): | |||
# 0xef = 1 1 1 0 1 1 1 1 | |||
# ^ ^ \+/ \--+--/ | |||
# | | | +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz) | |||
# | | +--------------- SUT 1..0 (BOD enabled, fast rising power) | |||
# | +------------------ CKOUT (clock output on CKOUT pin -> disabled) | |||
# +-------------------- CKDIV8 (divide clock by 8 -> don't divide) | |||
# ATMega*5 FUSE_H (Fuse high byte): | |||
# 0xdd = 1 1 0 1 1 1 0 1 | |||
# ^ ^ ^ ^ ^ \-+-/ | |||
# | | | | | +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V) | |||
# | | | | +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved) | |||
# | | | +-------------- WDTON (watchdog timer always on -> disable) | |||
# | | +---------------- SPIEN (enable serial programming -> enabled) | |||
# | +------------------ DWEN (debug wire enable) | |||
# +-------------------- RSTDISBL (disable external reset -> enabled) | |||
# | |||
################################ ATTiny2313 ################################# | |||
# ATTiny2313 FUSE_L (Fuse low byte): | |||
# 0xef = 1 1 1 0 1 1 1 1 | |||
# ^ ^ \+/ \--+--/ | |||
# | | | +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz) | |||
# | | +--------------- SUT 1..0 (BOD enabled, fast rising power) | |||
# | +------------------ CKOUT (clock output on CKOUT pin -> disabled) | |||
# +-------------------- CKDIV8 (divide clock by 8 -> don't divide) | |||
# ATTiny2313 FUSE_H (Fuse high byte): | |||
# 0xdb = 1 1 0 1 1 0 1 1 | |||
# ^ ^ ^ ^ \-+-/ ^ | |||
# | | | | | +---- RSTDISBL (disable external reset -> enabled) | |||
# | | | | +-------- BODLEVEL 2..0 (brownout trigger level -> 2.7V) | |||
# | | | +-------------- WDTON (watchdog timer always on -> disable) | |||
# | | +---------------- SPIEN (enable serial programming -> enabled) | |||
# | +------------------ EESAVE (preserve EEPROM on Chip Erase -> not preserved) | |||
# +-------------------- DWEN (debug wire enable) | |||
# symbolic targets: | |||
help: | |||
@echo "This Makefile has no default rule. Use one of the following:" | |||
@echo "make hex ....... to build main.hex" | |||
@echo "make program ... to flash fuses and firmware" | |||
@echo "make fuse ...... to flash the fuses" | |||
@echo "make flash ..... to flash the firmware (use this on metaboard)" | |||
@echo "make clean ..... to delete objects and hex file" | |||
hex: main.hex | |||
program: flash fuse | |||
# rule for programming fuse bits: | |||
fuse: | |||
@[ "$(FUSE_H)" != "" -a "$(FUSE_L)" != "" ] || \ | |||
{ echo "*** Edit Makefile and choose values for FUSE_L and FUSE_H!"; exit 1; } | |||
$(AVRDUDE) -U hfuse:w:$(FUSE_H):m -U lfuse:w:$(FUSE_L):m | |||
# rule for uploading firmware: | |||
flash: main.hex | |||
$(AVRDUDE) -U flash:w:main.hex:i | |||
# rule for deleting dependent files (those which can be built by Make): | |||
clean: | |||
rm -f main.hex main.lst main.obj main.cof main.list main.map main.eep.hex main.elf *.o usbdrv/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s | |||
# Generic rule for compiling C files: | |||
.c.o: | |||
$(COMPILE) -c $< -o $@ | |||
# Generic rule for assembling Assembler source files: | |||
.S.o: | |||
$(COMPILE) -x assembler-with-cpp -c $< -o $@ | |||
# "-x assembler-with-cpp" should not be necessary since this is the default | |||
# file type for the .S (with capital S) extension. However, upper case | |||
# characters are not always preserved on Windows. To ensure WinAVR | |||
# compatibility define the file type manually. | |||
# Generic rule for compiling C to assembler, used for debugging only. | |||
.c.s: | |||
$(COMPILE) -S $< -o $@ | |||
# file targets: | |||
# Since we don't want to ship the driver multipe times, we copy it into this project: | |||
usbdrv: | |||
cp -r ../usbdrv . | |||
main.elf: usbdrv $(OBJECTS) # usbdrv dependency only needed because we copy it | |||
$(COMPILE) -o main.elf $(OBJECTS) | |||
main.hex: main.elf | |||
rm -f main.hex main.eep.hex | |||
avr-objcopy -j .text -j .data -O ihex main.elf main.hex | |||
avr-size main.hex | |||
# debugging targets: | |||
disasm: main.elf | |||
avr-objdump -d main.elf | |||
cpp: | |||
$(COMPILE) -E main.c |
@@ -18,14 +18,6 @@ void host_vusb_keyboard_send() | |||
usbSetInterrupt((void *)&kbuf[kbuf_tail], sizeof(report_keyboard_t)); | |||
kbuf_tail = (kbuf_tail + 1) % KBUF_SIZE; | |||
} | |||
/* | |||
if (kbuf_head != kbuf_tail) { | |||
if (usbInterruptIsReady()) { | |||
usbSetInterrupt((void *)&kbuf[kbuf_tail], sizeof(report_keyboard_t)); | |||
kbuf_tail = (kbuf_tail + 1) % KBUF_SIZE; | |||
} | |||
} | |||
*/ | |||
} | |||
void host_keyboard_send(report_keyboard_t *report) | |||
@@ -37,12 +29,6 @@ void host_keyboard_send(report_keyboard_t *report) | |||
print("kbuf: "); phex(kbuf_head); phex(kbuf_tail); print("\n"); | |||
} else { | |||
print("kbuf: full\n"); | |||
// hmm... | |||
/* | |||
matrix_init(); | |||
kbuf_head = 0; | |||
kbuf_tail = 0; | |||
*/ | |||
} | |||
} | |||
@@ -1,97 +0,0 @@ | |||
#include "usb_keycodes.h" | |||
#include "host.h" | |||
#include "ps2.h" | |||
#include "usb.h" | |||
#include "keyboard.h" | |||
#include "print.h" | |||
static report_keyboard_t report0; | |||
static report_keyboard_t report1; | |||
static report_keyboard_t *report = &report0; | |||
static report_keyboard_t *report_prev = &report1; | |||
void keyboard_set_led(uint8_t usb_led) | |||
{ | |||
uint8_t ps2_led = 0; | |||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) | |||
ps2_led |= (1<<PS2_LED_SCROLL_LOCK); | |||
if (usb_led & (1<<USB_LED_NUM_LOCK)) | |||
ps2_led |= (1<<PS2_LED_NUM_LOCK); | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) | |||
ps2_led |= (1<<PS2_LED_CAPS_LOCK); | |||
print("ps2_led: "); phex(ps2_led); print("\n"); | |||
ps2_host_set_led(ps2_led); | |||
} | |||
void keyboard_send(void) | |||
{ | |||
host_keyboard_send(report); | |||
} | |||
bool keyboard_has_key(void) | |||
{ | |||
for (int i = 0; i < REPORT_KEYS; i++) { | |||
if (report->keys[i]) | |||
return true; | |||
} | |||
return false; | |||
} | |||
void keyboard_add_mod(uint8_t mod) | |||
{ | |||
report->mods |= mod; | |||
} | |||
void keyboard_add_key(uint8_t code) | |||
{ | |||
int8_t i = 0; | |||
int8_t empty = -1; | |||
for (; i < REPORT_KEYS; i++) { | |||
if (report_prev->keys[i] == code) { | |||
report->keys[i] = code; | |||
break; | |||
} | |||
if (empty == -1 && report_prev->keys[i] == KB_NO && report->keys[i] == KB_NO) { | |||
empty = i; | |||
} | |||
} | |||
if (i == REPORT_KEYS && empty != -1) { | |||
report->keys[empty] = code; | |||
} | |||
} | |||
void keyboard_add_code(uint8_t code) | |||
{ | |||
if (IS_MOD(code)) { | |||
keyboard_add_mod(code); | |||
} else { | |||
keyboard_add_key(code); | |||
} | |||
} | |||
void keyboard_swap_report(void) | |||
{ | |||
report_keyboard_t *tmp = report_prev; | |||
report_prev = report; | |||
report = tmp; | |||
} | |||
void keyboard_clear_report(void) | |||
{ | |||
report->mods = 0; | |||
for (int8_t i = 0; i < REPORT_KEYS; i++) { | |||
report->keys[i] = 0; | |||
} | |||
} | |||
report_keyboard_t *keyboard_report(void) | |||
{ | |||
return report; | |||
} | |||
report_keyboard_t *keyboard_report_prev(void) | |||
{ | |||
return report_prev; | |||
} |
@@ -1,22 +0,0 @@ | |||
#ifndef KEYBOARD_H | |||
#define KEYBOARD_H | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include "host.h" | |||
void keyboard_set_led(uint8_t led); | |||
void keyboard_send(void); | |||
bool keyboard_has_key(void); | |||
void keyboard_add_mod(uint8_t mod); | |||
void keyboard_add_key(uint8_t key); | |||
void keyboard_add_code(uint8_t code); | |||
void keyboard_swap_report(void); | |||
void keyboard_clear_report(void); | |||
report_keyboard_t *keyboard_report(void); | |||
report_keyboard_t *keyboard_report_prev(void); | |||
#endif | |||
@@ -4,8 +4,8 @@ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/pgmspace.h> | |||
#include "usb_keyboard.h" | |||
#include "usb_keycodes.h" | |||
#include "keyboard.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
@@ -185,5 +185,5 @@ uint8_t keymap_fn_keycode(uint8_t fn_bits) | |||
// define a condition to enter special function mode | |||
bool keymap_is_special_mode(uint8_t fn_bits) | |||
{ | |||
return usb_keyboard_mods == (BIT_LSHIFT | BIT_RSHIFT) || usb_keyboard_mods == (BIT_LCTRL | BIT_RSHIFT); | |||
return keyboard_get_mods() == (BIT_LSHIFT | BIT_RSHIFT) || keyboard_get_mods() == (BIT_LCTRL | BIT_RSHIFT); | |||
} |
@@ -1,183 +0,0 @@ | |||
#include "keymap_skel.h" | |||
#include "keyboard.h" | |||
#include "debug.h" | |||
#include "timer.h" | |||
#include "layer.h" | |||
/* | |||
* Parameters: | |||
* ENTER_DELAY |=======| | |||
* SEND_FN_TERM |================| | |||
* | |||
* Fn key processing cases: | |||
* 1. release Fn after SEND_FN_TERM. | |||
* Layer sw ___________|~~~~~~~~~~~|___ | |||
* Fn press ___|~~~~~~~~~~~~~~~~~~~|___ | |||
* Fn send ___________________________ | |||
* | |||
* 2. release Fn during SEND_FN_TERM.(not layer used) | |||
* Layer sw ___________|~~~~~~|________ | |||
* Fn press ___|~~~~~~~~~~~~~~|________ | |||
* Fn key send __________________|~|______ | |||
* other key press ___________________________ | |||
* other key send ___________________________ | |||
* | |||
* 3. release Fn during SEND_FN_TERM.(layer used) | |||
* Layer sw ___________|~~~~~~|________ | |||
* Fn press ___|~~~~~~~~~~~~~~|________ | |||
* Fn key send ___________________________ | |||
* Fn send ___________________________ | |||
* other key press _____________|~~|__________ | |||
* other key send _____________|~~|__________ | |||
* | |||
* 4. press other key during ENTER_DELAY. | |||
* Layer sw ___________________________ | |||
* Fn key press ___|~~~~~~~~~|_____________ | |||
* Fn key send ______|~~~~~~|_____________ | |||
* other key press ______|~~~|________________ | |||
* other key send _______|~~|________________ | |||
* | |||
* 5. press Fn while press other key. | |||
* Layer sw ___________________________ | |||
* Fn key press ___|~~~~~~~~~|_____________ | |||
* Fn key send ___|~~~~~~~~~|_____________ | |||
* other key press ~~~~~~~|___________________ | |||
* other key send ~~~~~~~|___________________ | |||
* | |||
* 6. press Fn twice quickly and keep holding down.(repeat) | |||
* Layer sw ___________________________ | |||
* Fn key press ___|~|____|~~~~~~~~~~~~~~~~ | |||
* Fn key send _____|~|__|~~~~~~~~~~~~~~~~ | |||
*/ | |||
// LAYER_ENTER_DELAY: prevent from moving new layer | |||
#define LAYER_ENTER_DELAY 10 | |||
// LAYER_SEND_FN_TERM: send keycode if release key in this term | |||
#define LAYER_SEND_FN_TERM 40 | |||
uint8_t default_layer = 0; | |||
uint8_t current_layer = 0; | |||
static bool layer_used = false; | |||
static uint8_t new_layer(uint8_t fn_bits); | |||
uint8_t layer_get_keycode(uint8_t row, uint8_t col) | |||
{ | |||
uint8_t code = keymap_get_keycode(current_layer, row, col); | |||
// normal key or mouse key | |||
if ((IS_KEY(code) || IS_MOUSEKEY(code))) { | |||
layer_used = true; | |||
} | |||
return code; | |||
} | |||
// bit substract b from a | |||
#define BIT_SUBT(a, b) (a&(a^b)) | |||
void layer_switching(uint8_t fn_bits) | |||
{ | |||
// layer switching | |||
static uint8_t last_fn = 0; | |||
static uint8_t last_mods = 0; | |||
static uint16_t last_timer = 0; | |||
static uint8_t sent_fn = 0; | |||
if (fn_bits == last_fn) { // Fn state is not changed | |||
if (fn_bits == 0) { | |||
// do nothing | |||
} else { | |||
if (timer_elapsed(last_timer) > LAYER_ENTER_DELAY) { | |||
uint8_t _layer_to_switch = new_layer(BIT_SUBT(fn_bits, sent_fn)); | |||
if (current_layer != _layer_to_switch) { // not switch layer yet | |||
debug("Fn case: 1,2,3(LAYER_ENTER_DELAY passed)\n"); | |||
debug("Switch Layer: "); debug_hex(current_layer); | |||
current_layer = _layer_to_switch; | |||
layer_used = false; | |||
debug(" -> "); debug_hex(current_layer); debug("\n"); | |||
} | |||
} else { | |||
if (keyboard_has_key()) { // other keys is pressed | |||
uint8_t _fn_to_send = BIT_SUBT(fn_bits, sent_fn); | |||
if (_fn_to_send) { | |||
debug("Fn case: 4(send Fn before other key pressed)\n"); | |||
// send only Fn key first | |||
keyboard_swap_report(); | |||
keyboard_clear_report(); | |||
keyboard_add_code(keymap_fn_keycode(_fn_to_send)); // TODO: do all Fn keys | |||
keyboard_add_mod(last_mods); | |||
keyboard_send(); | |||
keyboard_swap_report(); | |||
sent_fn |= _fn_to_send; | |||
} | |||
} | |||
} | |||
// add Fn keys to send | |||
//keyboard_add_code(keymap_fn_keycode(fn_bits&sent_fn)); // TODO: do all Fn keys | |||
} | |||
} else { // Fn state is changed(edge) | |||
uint8_t fn_changed = 0; | |||
debug("fn_bits: "); debug_bin(fn_bits); debug("\n"); | |||
debug("sent_fn: "); debug_bin(sent_fn); debug("\n"); | |||
debug("last_fn: "); debug_bin(last_fn); debug("\n"); | |||
debug("last_mods: "); debug_hex(last_mods); debug("\n"); | |||
debug("last_timer: "); debug_hex16(last_timer); debug("\n"); | |||
// pressed Fn | |||
if ((fn_changed = BIT_SUBT(fn_bits, last_fn))) { | |||
debug("fn_changed: "); debug_bin(fn_changed); debug("\n"); | |||
if (keyboard_has_key()) { | |||
debug("Fn case: 5(pressed Fn with other key)\n"); | |||
sent_fn |= fn_changed; | |||
} else if (fn_changed & sent_fn) { // pressed same Fn in a row | |||
if (timer_elapsed(last_timer) > LAYER_ENTER_DELAY) { | |||
debug("Fn case: 6(repate2)\n"); | |||
// time passed: not repeate | |||
sent_fn &= ~fn_changed; | |||
} else { | |||
debug("Fn case: 6(repate)\n"); | |||
} | |||
} | |||
} | |||
// released Fn | |||
if ((fn_changed = BIT_SUBT(last_fn, fn_bits))) { | |||
debug("fn_changed: "); debug_bin(fn_changed); debug("\n"); | |||
if (timer_elapsed(last_timer) < LAYER_SEND_FN_TERM) { | |||
//if (!layer_used && BIT_SUBT(fn_changed, sent_fn)) { // layer not used && Fn not sent | |||
if (BIT_SUBT(fn_changed, sent_fn)) { // layer not used && Fn not sent | |||
debug("Fn case: 2(send Fn one shot: released Fn during LAYER_SEND_FN_TERM)\n"); | |||
// send only Fn key first | |||
keyboard_swap_report(); | |||
keyboard_clear_report(); | |||
keyboard_add_code(keymap_fn_keycode(fn_changed)); // TODO: do all Fn keys | |||
keyboard_add_mod(last_mods); | |||
keyboard_send(); | |||
keyboard_swap_report(); | |||
sent_fn |= fn_changed; | |||
} | |||
} | |||
debug("Switch Layer(released Fn): "); debug_hex(current_layer); | |||
current_layer = new_layer(BIT_SUBT(fn_bits, sent_fn)); | |||
layer_used = false; | |||
debug(" -> "); debug_hex(current_layer); debug("\n"); | |||
} | |||
last_fn = fn_bits; | |||
last_mods = keyboard_report()->mods; | |||
last_timer = timer_read(); | |||
} | |||
// send Fn keys | |||
for (uint8_t i = 0; i < 8; i++) { | |||
if ((sent_fn & fn_bits) & (1<<i)) { | |||
keyboard_add_code(keymap_fn_keycode(1<<i)); | |||
} | |||
} | |||
} | |||
inline | |||
static uint8_t new_layer(uint8_t fn_bits) | |||
{ | |||
return (fn_bits ? keymap_fn_layer(fn_bits) : default_layer); | |||
} |
@@ -0,0 +1,16 @@ | |||
#include "stdint.h" | |||
#include "ps2.h" | |||
#include "led.h" | |||
void led_set(uint8_t usb_led) | |||
{ | |||
uint8_t ps2_led = 0; | |||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) | |||
ps2_led |= (1<<PS2_LED_SCROLL_LOCK); | |||
if (usb_led & (1<<USB_LED_NUM_LOCK)) | |||
ps2_led |= (1<<PS2_LED_NUM_LOCK); | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) | |||
ps2_led |= (1<<PS2_LED_CAPS_LOCK); | |||
ps2_host_set_led(ps2_led); | |||
} |
@@ -84,7 +84,7 @@ int main(void) | |||
// do nothing | |||
} | |||
else if (IS_MOD(code)) { | |||
keyboard_add_mod(MOD_BIT(code)); | |||
keyboard_add_mod_bit(MOD_BIT(code)); | |||
} | |||
else if (IS_KEY(code)) { | |||
keyboard_add_key(code); |
@@ -9,7 +9,7 @@ | |||
#include "util.h" | |||
#include "debug.h" | |||
#include "ps2.h" | |||
#include "usb_keyboard.h" | |||
#include "keyboard.h" | |||
#include "matrix_skel.h" | |||