From ce6698865046c2d5e5fae73a74323048036e7d44 Mon Sep 17 00:00:00 2001 From: tmk Date: Fri, 16 Jan 2015 08:26:59 +0900 Subject: [PATCH 1/2] hhkb_rn42: Move doc --- keyboard/hhkb_rn42/{ => rn42}/PowerSave.txt | 47 ++------------------- 1 file changed, 4 insertions(+), 43 deletions(-) rename keyboard/hhkb_rn42/{ => rn42}/PowerSave.txt (71%) diff --git a/keyboard/hhkb_rn42/PowerSave.txt b/keyboard/hhkb_rn42/rn42/PowerSave.txt similarity index 71% rename from keyboard/hhkb_rn42/PowerSave.txt rename to keyboard/hhkb_rn42/rn42/PowerSave.txt index 9aa89f44..8aea1c6d 100644 --- a/keyboard/hhkb_rn42/PowerSave.txt +++ b/keyboard/hhkb_rn42/rn42/PowerSave.txt @@ -1,11 +1,9 @@ -RN-42 -===== +Power Saving +============ -12/11 -Power Comsumption -MCU+HHKB --------- +MCU+HHKB Power Comsumption +-------------------------- Battery drive: idle 18.9mA active 35.8mA @@ -76,40 +74,3 @@ S%,1000 status led and connection control don't work GPIO5: status LED GPIO6: Connection control GPIO2: linked status - - - - - -Ver 6.15 04/26/2013 -(c) Roving Networks -***Settings*** -BTA=00066667BBE9 -BTName=tmkBT-BBE9 -Baudrt(SW4)=115K -Mode =DTR -Authen=1 -Bonded=0 -Rem=001BDC06415B -***ADVANCED Settings*** -SrvName= keyboard/mouse -SrvClass=0000 -DevClass=1F00 -InqWindw=0012 -PagWindw=0012 -CfgTimer=255 -StatuStr=NULL -HidFlags=3c -DTRtimer=8 -KeySwapr=0 -***OTHER Settings*** -Profile= HID -CfgChar= $ -SniffEna=8010 -LowPower=0 S|, -TX Power=fff4 SY, -IOPorts= 0 -IOValues=0 -Sleeptmr=0 -DebugMod=0 -RoleSwch=0 From 099701dd3130d433244b3a4102f36f547aec25ae Mon Sep 17 00:00:00 2001 From: tmk Date: Fri, 16 Jan 2015 10:21:18 +0900 Subject: [PATCH 2/2] hhkb: Integrate RN-42 support, remove hhkb_rn42 --- keyboard/hhkb/Makefile.nodebug | 141 --------- .../Makefile => hhkb/Makefile.rn42} | 22 +- keyboard/hhkb/README.md | 17 +- .../config.h => hhkb/config_rn42.h} | 0 keyboard/hhkb/hhkb_avr.h | 28 +- keyboard/hhkb/matrix.c | 27 +- .../hhkb/{ => not_supported}/Makefile.iwrap | 0 .../hhkb/{ => not_supported}/Makefile.vusb | 0 .../hhkb/{ => not_supported}/config_iwrap.h | 0 .../hhkb/{ => not_supported}/config_vusb.h | 0 keyboard/hhkb/{ => not_supported}/iwrap.txt | 0 keyboard/hhkb/{ => not_supported}/usbconfig.h | 0 keyboard/{hhkb_rn42 => hhkb}/rn42.mk | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/MEMO.txt | 0 .../{hhkb_rn42 => hhkb}/rn42/PowerSave.txt | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/RN42.txt | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/battery.c | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/battery.h | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/main.c | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/rn42.c | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/rn42.h | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/rn42_task.c | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/rn42_task.h | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/suart.S | 0 keyboard/{hhkb_rn42 => hhkb}/rn42/suart.h | 0 keyboard/hhkb_rn42/hhkb_avr.h | 166 ----------- keyboard/hhkb_rn42/keymap_common.c | 33 -- keyboard/hhkb_rn42/keymap_common.h | 84 ------ keyboard/hhkb_rn42/keymap_hasu.c | 282 ------------------ keyboard/hhkb_rn42/keymap_jp.c | 50 ---- keyboard/hhkb_rn42/led.c | 33 -- keyboard/hhkb_rn42/matrix.c | 190 ------------ 32 files changed, 69 insertions(+), 1004 deletions(-) delete mode 100644 keyboard/hhkb/Makefile.nodebug rename keyboard/{hhkb_rn42/Makefile => hhkb/Makefile.rn42} (95%) rename keyboard/{hhkb_rn42/config.h => hhkb/config_rn42.h} (100%) rename keyboard/hhkb/{ => not_supported}/Makefile.iwrap (100%) rename keyboard/hhkb/{ => not_supported}/Makefile.vusb (100%) rename keyboard/hhkb/{ => not_supported}/config_iwrap.h (100%) rename keyboard/hhkb/{ => not_supported}/config_vusb.h (100%) rename keyboard/hhkb/{ => not_supported}/iwrap.txt (100%) rename keyboard/hhkb/{ => not_supported}/usbconfig.h (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42.mk (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/MEMO.txt (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/PowerSave.txt (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/RN42.txt (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/battery.c (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/battery.h (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/main.c (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/rn42.c (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/rn42.h (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/rn42_task.c (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/rn42_task.h (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/suart.S (100%) rename keyboard/{hhkb_rn42 => hhkb}/rn42/suart.h (100%) delete mode 100644 keyboard/hhkb_rn42/hhkb_avr.h delete mode 100644 keyboard/hhkb_rn42/keymap_common.c delete mode 100644 keyboard/hhkb_rn42/keymap_common.h delete mode 100644 keyboard/hhkb_rn42/keymap_hasu.c delete mode 100644 keyboard/hhkb_rn42/keymap_jp.c delete mode 100644 keyboard/hhkb_rn42/led.c delete mode 100644 keyboard/hhkb_rn42/matrix.c diff --git a/keyboard/hhkb/Makefile.nodebug b/keyboard/hhkb/Makefile.nodebug deleted file mode 100644 index 578ba70c..00000000 --- a/keyboard/hhkb/Makefile.nodebug +++ /dev/null @@ -1,141 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = hhkb_lufa - -# Directory common source filess exist -TOP_DIR = ../.. - -# Directory keyboard dependent files exist -TARGET_DIR = . - - -# List C source files here. (C dependencies are automatically generated.) -SRC += keymap_common.c \ - matrix.c \ - led.c - -ifdef KEYMAP - SRC := keymap_$(KEYMAP).c $(SRC) -else - SRC := keymap_hasu.c $(SRC) -endif - -CONFIG_H = config.h - - -# MCU name -# PJRC Teensy++ 2.0 -#MCU = at90usb1286 -# TMK Alt Controller or PJRC Teensy 2.0 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 (TMK Alt Controller) -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -#CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TOP_DIR) - -include $(TOP_DIR)/protocol/lufa.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk - -debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION -debug-on: all - -debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT -debug-off: all diff --git a/keyboard/hhkb_rn42/Makefile b/keyboard/hhkb/Makefile.rn42 similarity index 95% rename from keyboard/hhkb_rn42/Makefile rename to keyboard/hhkb/Makefile.rn42 index 3d9a602a..b1eacd07 100644 --- a/keyboard/hhkb_rn42/Makefile +++ b/keyboard/hhkb/Makefile.rn42 @@ -39,7 +39,7 @@ #---------------------------------------------------------------------------- # Target file name (without extension). -TARGET = hhkb_lufa +TARGET = hhkb_rn42 # Directory common source filess exist TOP_DIR = ../.. @@ -53,13 +53,10 @@ SRC += keymap_common.c \ matrix.c \ led.c -CONFIG_H = config.h +CONFIG_H = config_rn42.h # MCU name -# PJRC Teensy++ 2.0 -#MCU = at90usb1286 -# TMK Alt Controller or PJRC Teensy 2.0 MCU = atmega32u4 # Processor frequency. @@ -121,11 +118,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration #HHKB_JP = yes # HHKB JP support -ifdef HHKB_JP - OPT_DEFS += -DHHKB_JP -endif - - # # Keymap file # @@ -134,12 +126,17 @@ ifdef KEYMAP else ifdef HHKB_JP SRC := keymap_jp.c $(SRC) - else - SRC := keymap_hasu.c $(SRC) + else + SRC := keymap_hhkb.c $(SRC) endif endif +ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP)))) + OPT_DEFS += -DHHKB_JP +endif + + # Search Path VPATH += $(TARGET_DIR) VPATH += $(TOP_DIR) @@ -154,4 +151,5 @@ debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION debug-on: all debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) debug-off: all diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md index f9fd1650..fcd72e19 100644 --- a/keyboard/hhkb/README.md +++ b/keyboard/hhkb/README.md @@ -10,11 +10,17 @@ See [this thread][AltController] in geekhack.org. [AltController]: http://geekhack.org/index.php?topic=12047.0 +## Update +* Bluetooth module RN-42 is supported.(2015/01) +* V-USB and iWRAP are no longer supported now, but still it'll works with a little fix. See not_supported directory.(2015/01) + + ##Features * Customizable keymap * More keymap layers(more Fn keys) * Mouse keys * USB NKRO +* Bluetooth(RN-42) See README of [tmk_keyboard] for more. @@ -50,8 +56,9 @@ If you use other than **TMK Alt Controller Board** set proper `MCU`, `BOOTLOADER ### Build Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like: - $ make KEYMAP=[hasu|hhkb|spacefn|] - $ make -f Makefile.jp KEYMAP=[jp|] # for HHKB JP + $ make -f Makefile. KEYMAP=(hasu|hhkb|spacefn|) + +You can omit `-f` option when you use `Makefile`. `Makefile` is used for **Pro2 and Pro**, `Makefile.jp` fits for **JP** model and `Makefile.rn42` supports Bluetooth module **RN-42**. `Makefile.pjrc` uses **PJRC** as output protocol instead of **LUFA**. ### Program @@ -59,13 +66,11 @@ First, push reset button on board to start bootloader. This command programs the controller with [dfu-programmer] if the tool is installed and configured properly. - $ make dfu - $ make -f Makefile.jp dfu # for HHKB JP + $ make -f Makefile. KEYMAP= dfu Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available. - $ make flip - $ make -f Makefile.jp flip # for HHKB JP + $ make -f Makefile. KEYMAP= flip Use [Teensy Loader] if your controller is Teensy/Teensy++. diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb/config_rn42.h similarity index 100% rename from keyboard/hhkb_rn42/config.h rename to keyboard/hhkb/config_rn42.h diff --git a/keyboard/hhkb/hhkb_avr.h b/keyboard/hhkb/hhkb_avr.h index b7bd507b..7ea6322c 100644 --- a/keyboard/hhkb/hhkb_avr.h +++ b/keyboard/hhkb/hhkb_avr.h @@ -41,17 +41,32 @@ static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); } static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } +#ifdef HHKB_POWER_SAVING +static inline void KEY_POWER_ON(void) { + DDRB = 0xFF; PORTB = 0x40; // change pins output + DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on + /* Without this wait you will miss or get false key events. */ + _delay_ms(5); // wait for powering up +} +static inline void KEY_POWER_OFF(void) { + /* input with pull-up consumes less than without it when pin is open. */ + DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up + DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off +} +static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); } +#else static inline void KEY_POWER_ON(void) {} static inline void KEY_POWER_OFF(void) {} +static inline bool KEY_POWER_STATE(void) { return true; } +#endif static inline void KEY_INIT(void) { + /* row,col,prev: output */ DDRB = 0xFF; - PORTB = 0x00; + PORTB = 0x40; // unable + /* key: input with pull-up */ DDRD &= ~0x80; - PORTD |= 0x80; - /* keyswitch board power on */ - DDRD |= (1<<4); - PORTD |= (1<<4); + PORTD |= 0x80; #ifdef HHKB_JP /* row extention for HHKB JP */ DDRC |= (1<<6|1<<7); @@ -59,6 +74,8 @@ static inline void KEY_INIT(void) #endif KEY_UNABLE(); KEY_PREV_OFF(); + + KEY_POWER_OFF(); } static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) { @@ -98,6 +115,7 @@ static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) #define KEY_PREV_OFF() (PORTE &= ~(1<<7)) #define KEY_POWER_ON() #define KEY_POWER_OFF() +#define KEY_POWER_STATE() true #else diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c index b0af4baa..fb969979 100644 --- a/keyboard/hhkb/matrix.c +++ b/keyboard/hhkb/matrix.c @@ -27,8 +27,15 @@ along with this program. If not, see . #include "timer.h" #include "matrix.h" #include "hhkb_avr.h" +#include +#include "suspend.h" +#include "lufa.h" +// matrix power saving +#define MATRIX_POWER_SAVE 10000 +static uint32_t matrix_last_modified = 0; + // matrix state buffer(1:on, 0:off) static matrix_row_t *matrix; static matrix_row_t *matrix_prev; @@ -72,7 +79,8 @@ uint8_t matrix_scan(void) matrix_prev = matrix; matrix = tmp; - KEY_POWER_ON(); + // power on + if (!KEY_POWER_STATE()) KEY_POWER_ON(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { for (uint8_t col = 0; col < MATRIX_COLS; col++) { KEY_SELECT(row, col); @@ -126,8 +134,16 @@ uint8_t matrix_scan(void) // This takes 25us or more to make sure KEY_STATE returns to idle state. _delay_us(75); } + if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32(); + } + // power off + if (KEY_POWER_STATE() && + (USB_DeviceState == DEVICE_STATE_Suspended || + USB_DeviceState == DEVICE_STATE_Unattached ) && + timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) { + KEY_POWER_OFF(); + suspend_power_down(); } - KEY_POWER_OFF(); return 1; } @@ -165,3 +181,10 @@ void matrix_print(void) xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row))); } } + +void matrix_power_up(void) { + KEY_POWER_ON(); +} +void matrix_power_down(void) { + KEY_POWER_OFF(); +} diff --git a/keyboard/hhkb/Makefile.iwrap b/keyboard/hhkb/not_supported/Makefile.iwrap similarity index 100% rename from keyboard/hhkb/Makefile.iwrap rename to keyboard/hhkb/not_supported/Makefile.iwrap diff --git a/keyboard/hhkb/Makefile.vusb b/keyboard/hhkb/not_supported/Makefile.vusb similarity index 100% rename from keyboard/hhkb/Makefile.vusb rename to keyboard/hhkb/not_supported/Makefile.vusb diff --git a/keyboard/hhkb/config_iwrap.h b/keyboard/hhkb/not_supported/config_iwrap.h similarity index 100% rename from keyboard/hhkb/config_iwrap.h rename to keyboard/hhkb/not_supported/config_iwrap.h diff --git a/keyboard/hhkb/config_vusb.h b/keyboard/hhkb/not_supported/config_vusb.h similarity index 100% rename from keyboard/hhkb/config_vusb.h rename to keyboard/hhkb/not_supported/config_vusb.h diff --git a/keyboard/hhkb/iwrap.txt b/keyboard/hhkb/not_supported/iwrap.txt similarity index 100% rename from keyboard/hhkb/iwrap.txt rename to keyboard/hhkb/not_supported/iwrap.txt diff --git a/keyboard/hhkb/usbconfig.h b/keyboard/hhkb/not_supported/usbconfig.h similarity index 100% rename from keyboard/hhkb/usbconfig.h rename to keyboard/hhkb/not_supported/usbconfig.h diff --git a/keyboard/hhkb_rn42/rn42.mk b/keyboard/hhkb/rn42.mk similarity index 100% rename from keyboard/hhkb_rn42/rn42.mk rename to keyboard/hhkb/rn42.mk diff --git a/keyboard/hhkb_rn42/rn42/MEMO.txt b/keyboard/hhkb/rn42/MEMO.txt similarity index 100% rename from keyboard/hhkb_rn42/rn42/MEMO.txt rename to keyboard/hhkb/rn42/MEMO.txt diff --git a/keyboard/hhkb_rn42/rn42/PowerSave.txt b/keyboard/hhkb/rn42/PowerSave.txt similarity index 100% rename from keyboard/hhkb_rn42/rn42/PowerSave.txt rename to keyboard/hhkb/rn42/PowerSave.txt diff --git a/keyboard/hhkb_rn42/rn42/RN42.txt b/keyboard/hhkb/rn42/RN42.txt similarity index 100% rename from keyboard/hhkb_rn42/rn42/RN42.txt rename to keyboard/hhkb/rn42/RN42.txt diff --git a/keyboard/hhkb_rn42/rn42/battery.c b/keyboard/hhkb/rn42/battery.c similarity index 100% rename from keyboard/hhkb_rn42/rn42/battery.c rename to keyboard/hhkb/rn42/battery.c diff --git a/keyboard/hhkb_rn42/rn42/battery.h b/keyboard/hhkb/rn42/battery.h similarity index 100% rename from keyboard/hhkb_rn42/rn42/battery.h rename to keyboard/hhkb/rn42/battery.h diff --git a/keyboard/hhkb_rn42/rn42/main.c b/keyboard/hhkb/rn42/main.c similarity index 100% rename from keyboard/hhkb_rn42/rn42/main.c rename to keyboard/hhkb/rn42/main.c diff --git a/keyboard/hhkb_rn42/rn42/rn42.c b/keyboard/hhkb/rn42/rn42.c similarity index 100% rename from keyboard/hhkb_rn42/rn42/rn42.c rename to keyboard/hhkb/rn42/rn42.c diff --git a/keyboard/hhkb_rn42/rn42/rn42.h b/keyboard/hhkb/rn42/rn42.h similarity index 100% rename from keyboard/hhkb_rn42/rn42/rn42.h rename to keyboard/hhkb/rn42/rn42.h diff --git a/keyboard/hhkb_rn42/rn42/rn42_task.c b/keyboard/hhkb/rn42/rn42_task.c similarity index 100% rename from keyboard/hhkb_rn42/rn42/rn42_task.c rename to keyboard/hhkb/rn42/rn42_task.c diff --git a/keyboard/hhkb_rn42/rn42/rn42_task.h b/keyboard/hhkb/rn42/rn42_task.h similarity index 100% rename from keyboard/hhkb_rn42/rn42/rn42_task.h rename to keyboard/hhkb/rn42/rn42_task.h diff --git a/keyboard/hhkb_rn42/rn42/suart.S b/keyboard/hhkb/rn42/suart.S similarity index 100% rename from keyboard/hhkb_rn42/rn42/suart.S rename to keyboard/hhkb/rn42/suart.S diff --git a/keyboard/hhkb_rn42/rn42/suart.h b/keyboard/hhkb/rn42/suart.h similarity index 100% rename from keyboard/hhkb_rn42/rn42/suart.h rename to keyboard/hhkb/rn42/suart.h diff --git a/keyboard/hhkb_rn42/hhkb_avr.h b/keyboard/hhkb_rn42/hhkb_avr.h deleted file mode 100644 index 0321977d..00000000 --- a/keyboard/hhkb_rn42/hhkb_avr.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef HHKB_AVR_H -#define HHKB_AVR_H - -#include -#include -#include -#include -#include - - -// Timer resolution check -#if (1000000/TIMER_RAW_FREQ > 20) -# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." -#endif - - -/* - * HHKB Matrix I/O - * - * row: HC4051[A,B,C] selects scan row0-7 - * row-ext: [En0,En1] row extention for JP - * col: LS145[A,B,C,D] selects scan col0-7 and enable(D) - * key: on: 0/off: 1 - * prev: hysteresis control: assert(1) when previous key state is on - */ - - -#if defined(__AVR_ATmega32U4__) -/* - * For TMK HHKB alt controller(ATMega32U4) - * - * row: PB0-2 - * col: PB3-5,6 - * key: PD7(pull-uped) - * prev: PB7 - * power: PD4(L:off/H:on) - * row-ext: PC6,7 for HHKB JP(active low) - */ -static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); } -static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); } -static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } -static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } -static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } -#ifdef HHKB_POWER_SAVING -static inline void KEY_POWER_ON(void) { - DDRB = 0xFF; PORTB = 0x40; // change pins output - DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on - /* Without this wait you will miss or get false key events. */ - _delay_ms(5); // wait for powering up -} -static inline void KEY_POWER_OFF(void) { - /* input with pull-up consumes less than without it when pin is open. */ - DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up - DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off -} -static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); } -#else -static inline void KEY_POWER_ON(void) {} -static inline void KEY_POWER_OFF(void) {} -static inline bool KEY_POWER_STATE(void) { return true; } -#endif -static inline void KEY_INIT(void) -{ - /* row,col,prev: output */ - DDRB = 0xFF; - PORTB = 0x40; // unable - /* key: input with pull-up */ - DDRD &= ~0x80; - PORTD |= 0x80; -#ifdef HHKB_JP - /* row extention for HHKB JP */ - DDRC |= (1<<6|1<<7); - PORTC |= (1<<6|1<<7); -#endif - KEY_UNABLE(); - KEY_PREV_OFF(); - - KEY_POWER_OFF(); -} -static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) -{ - PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07); -#ifdef HHKB_JP - if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6); - else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7); -#endif -} - - -#elif defined(__AVR_AT90USB1286__) -/* - * For Teensy++(AT90USB1286) - * - * HHKB pro HHKB pro2 - * row: PB0-2 (6-8) (5-7) - * col: PB3-5,6 (9-12) (8-11) - * key: PE6(pull-uped) (4) (3) - * prev: PE7 (5) (4) - * - * TODO: convert into 'staitc inline' function - */ -#define KEY_INIT() do { \ - DDRB |= 0x7F; \ - DDRE |= (1<<7); \ - DDRE &= ~(1<<6); \ - PORTE |= (1<<6); \ -} while (0) -#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ - (((COL) & 0x07)<<3) | \ - ((ROW) & 0x07)) -#define KEY_ENABLE() (PORTB &= ~(1<<6)) -#define KEY_UNABLE() (PORTB |= (1<<6)) -#define KEY_STATE() (PINE & (1<<6)) -#define KEY_PREV_ON() (PORTE |= (1<<7)) -#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) -#define KEY_POWER_ON() -#define KEY_POWER_OFF() - - -#else -# error "define code for matrix scan" -#endif - - -#if 0 -// For ATMega328P with V-USB -// -// #elif defined(__AVR_ATmega328P__) -// Ports for V-USB -// key: PB0(pull-uped) -// prev: PB1 -// row: PB2-4 -// col: PC0-2,3 -// power: PB5(Low:on/Hi-z:off) -#define KEY_INIT() do { \ - DDRB |= 0x3E; \ - DDRB &= ~(1<<0); \ - PORTB |= 1<<0; \ - DDRC |= 0x0F; \ - KEY_UNABLE(); \ - KEY_PREV_OFF(); \ -} while (0) -#define KEY_SELECT(ROW, COL) do { \ - PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ - PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ -} while (0) -#define KEY_ENABLE() (PORTC &= ~(1<<3)) -#define KEY_UNABLE() (PORTC |= (1<<3)) -#define KEY_STATE() (PINB & (1<<0)) -#define KEY_PREV_ON() (PORTB |= (1<<1)) -#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) -// Power supply switching -#define KEY_POWER_ON() do { \ - KEY_INIT(); \ - PORTB &= ~(1<<5); \ - _delay_ms(1); \ -} while (0) -#define KEY_POWER_OFF() do { \ - DDRB &= ~0x3F; \ - PORTB &= ~0x3F; \ - DDRC &= ~0x0F; \ - PORTC &= ~0x0F; \ -} while (0) -#endif - -#endif diff --git a/keyboard/hhkb_rn42/keymap_common.c b/keyboard/hhkb_rn42/keymap_common.c deleted file mode 100644 index e938fb62..00000000 --- a/keyboard/hhkb_rn42/keymap_common.c +++ /dev/null @@ -1,33 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include "action.h" -#include -#include "keymap_common.h" - - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; -} diff --git a/keyboard/hhkb_rn42/keymap_common.h b/keyboard/hhkb_rn42/keymap_common.h deleted file mode 100644 index 3622665f..00000000 --- a/keyboard/hhkb_rn42/keymap_common.h +++ /dev/null @@ -1,84 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H - -#include -#include -#include "keycode.h" -#include "action.h" -#include "action_code.h" -#include "action_layer.h" -#include "action_macro.h" -#include "action_util.h" -#include "report.h" -#include "host.h" -#include "print.h" -#include "debug.h" -#include "keymap.h" - - -extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; -extern const uint16_t fn_actions[]; - - -#define KEYMAP( \ - K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ - K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ - K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ - K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ - K35, K36, K37, K57, K56 \ -) \ -{ \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ - { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \ -} - - -#define KEYMAP_JP( \ - K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \ - K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \ - K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \ - K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \ - K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4 \ -) \ -{ \ - { KC_NO, KC_NO, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO }, \ - { KC_NO, KC_NO, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \ - { KC_NO, KC_NO, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ - { KC_NO, KC_NO, KC_##K32, KC_NO, KC_##K34, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_NO, KC_##K55, KC_##K56, KC_NO }, \ - { KC_NO, KC_NO, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \ - { KC_NO, KC_NO, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO }, \ - { KC_NO, KC_NO, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO }, \ - { KC_NO, KC_NO, KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_NO }, \ - { KC_NO, KC_NO, KC_##KA2, KC_##KA3, KC_NO, KC_##KA5, KC_##KA6, KC_NO }, \ - { KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_NO }, \ - { KC_NO, KC_NO, KC_##KC2, KC_NO, KC_##KC4, KC_##KC5, KC_##KC6, KC_NO }, \ - { KC_NO, KC_NO, KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_NO }, \ - { KC_NO, KC_NO, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_NO }, \ - { KC_NO, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_NO } \ -} - -#endif diff --git a/keyboard/hhkb_rn42/keymap_hasu.c b/keyboard/hhkb_rn42/keymap_hasu.c deleted file mode 100644 index 433f9cb2..00000000 --- a/keyboard/hhkb_rn42/keymap_hasu.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * Hasu: my personal keymap - */ -#include "keymap_common.h" - - -#ifdef KEYMAP_SECTION_ENABLE -const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { -#else -const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { -#endif - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Fn6 | - * |-----------------------------------------------------------| - * |Fn7 | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |Fn1| - * `-----------------------------------------------------------' - * |Gui|Alt | Fn4 |Fn5 |Gui| - * `-------------------------------------------' - */ - [0] = \ - KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ - LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \ - FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ - LGUI,LALT, FN4, FN5, RGUI), - - /* Layer 1: HHKB mode[HHKB Fn] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| - * |-----------------------------------------------------------| - * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | - * |-----------------------------------------------------------| - * |Shift | | | | | | +| -|End|PgD|Dow|Shift | | - * `-----------------------------------------------------------' - * |Gui|Alt | Space |Alt |Gui| - * `-------------------------------------------' - */ - [1] = \ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \ - LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ - LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \ - LGUI,LALT, TRNS, RALT,RGUI), - - /* Layer 2: Vi mode[Slash] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| - * |-----------------------------------------------------------| - * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | - * `-----------------------------------------------------------' - * |Gui|Alt | Space |Alt |Gui| - * `-------------------------------------------' - */ - [2] = \ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \ - LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ - LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,TRNS, \ - LGUI,LALT, SPC, RALT,RGUI), - - /* Layer 3: Mouse mode(IJKL)[Semicolon] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| - * |-----------------------------------------------------------| - * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Mb1 |Fn |Fn | - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - [3] = \ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \ - LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,FN3, NO, ENT, \ - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \ - LGUI,LALT, BTN1, TRNS,TRNS), - - /* Layer 4: Mouse mode(IJKL)[Space] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| - * |-----------------------------------------------------------| - * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Mb1 |Fn |Fn | - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - [4] = \ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \ - LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \ - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \ - LGUI,LALT, TRNS, TRNS,TRNS), - -#if 0 - /* Layer 3: Mouse mode(HJKL)[Semicolon] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|MwU|MwR| | | |Backs| - * |-----------------------------------------------------------| - * |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Mb1 |Alt |Fn0| - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - TAB, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, NO, NO, BSPC, \ - LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \ - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,SLSH,RSFT,NO, \ - LGUI,LALT, BTN1, RALT,TRNS), - - /* Layer4: Mouse mode(HJKL)[Space] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|MwU|MwR| |Wbk|Wfr|Alt-T| - * |-----------------------------------------------------------| - * |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Fn0 |Alt |Fn0| - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - FN8, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, FN9, FN10,FN8, \ - LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \ - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \ - LGUI,LALT, TRNS, RALT,RGUI), -#endif -#if 0 - /* Layer x: Matias half-qwerty keyboard style[Space] - * ,-----------------------------------------------------------. - * | -| 0| 9| 8| 7| 6| 5| 4| 3| 2| 1| | | |Esc| - * |-----------------------------------------------------------| - * |Backs| P| O| I| U| Y| T| R| E| W| Q| | |Tab | - * |-----------------------------------------------------------| - * |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control | - * |-----------------------------------------------------------| - * |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Fn0 |Alt |Gui| - * `--------------------------------------------' - */ - KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, NO, ESC, \ - BSPC,P, O, I, U, Y, T, R, E, W, Q, NO, NO, TAB, \ - LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \ - LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \ - LGUI,LALT, TRNS, RALT,RGUI), -#endif -}; - - - -/* id for user defined functions */ -enum function_id { - LSHIFT_LPAREN, -}; - -enum macro_id { - HELLO, - VOLUP, - ALT_TAB, -}; - - -/* - * Fn action definition - */ -#ifdef KEYMAP_SECTION_ENABLE -const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { -#else -const uint16_t fn_actions[] PROGMEM = { -#endif - [0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used) - [1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps) - [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash* - [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon* - [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space - [5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL) - [6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter - [7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift - [8] = ACTION_MACRO(ALT_TAB), // Application switching - [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT), - [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT), - -// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace -// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc -// [x] = ACTION_FUNCTION_TAP(LSHIFT_LPAREN), // Function: LShift with tap '(' -// [x] = ACTION_MACRO(HELLO), // Macro: say hello -// [x] = ACTION_MACRO(VOLUP), // Macro: media key -}; - - -/* - * Macro definition - */ -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch (id) { - case HELLO: - return (record->event.pressed ? - MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) : - MACRO_NONE ); - case VOLUP: - return (record->event.pressed ? - MACRO( D(VOLU), U(VOLU), END ) : - MACRO_NONE ); - case ALT_TAB: - return (record->event.pressed ? - MACRO( D(LALT), D(TAB), END ) : - MACRO( U(TAB), END )); - } - return MACRO_NONE; -} - - - -/* - * user defined action function - */ -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - if (record->event.pressed) dprint("P"); else dprint("R"); - dprintf("%d", record->tap.count); - if (record->tap.interrupted) dprint("i"); - dprint("\n"); - - switch (id) { - case LSHIFT_LPAREN: - // Shift parentheses example: LShft + tap '(' - // http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses - // http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899 - if (record->event.pressed) { - if (record->tap.count > 0 && !record->tap.interrupted) { - if (record->tap.interrupted) { - dprint("tap interrupted\n"); - register_mods(MOD_BIT(KC_LSHIFT)); - } - } else { - register_mods(MOD_BIT(KC_LSHIFT)); - } - } else { - if (record->tap.count > 0 && !(record->tap.interrupted)) { - add_weak_mods(MOD_BIT(KC_LSHIFT)); - send_keyboard_report(); - register_code(KC_9); - unregister_code(KC_9); - del_weak_mods(MOD_BIT(KC_LSHIFT)); - send_keyboard_report(); - record->tap.count = 0; // ad hoc: cancel tap - } else { - unregister_mods(MOD_BIT(KC_LSHIFT)); - } - } - break; - } -} diff --git a/keyboard/hhkb_rn42/keymap_jp.c b/keyboard/hhkb_rn42/keymap_jp.c deleted file mode 100644 index 48d0ee70..00000000 --- a/keyboard/hhkb_rn42/keymap_jp.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * HHKB JP Layout - */ -#include "keymap_common.h" - - -#ifdef KEYMAP_SECTION_ENABLE -const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { -#else -const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { -#endif - /* Layer 0: Default Layer */ - KEYMAP_JP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, \ - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS,ENT, \ - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, UP, RSFT, \ - FN0, ZKHK,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,FN0, LEFT,DOWN,RGHT), - - /* Layer 1: HHKB mode (HHKB Fn) - * ,-----------------------------------------------------------. - * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Caps | | | | | | | |Psc|Slk|Pus|Up | | | - * |------------------------------------------------------` | - * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | - * |-----------------------------------------------------------| - * | | | | | | | +| -|End|PgD|Dow| | | | - * |-----------------------------------------------------------| - * | || | | | | | | | | || | | | - * `-----------------------------------------------------------' - */ - KEYMAP_JP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ - CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, \ - TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS,PENT, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS), -}; - - - -/* - * Fn action definition - */ -#ifdef KEYMAP_SECTION_ENABLE -const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { -#else -const uint16_t fn_actions[] PROGMEM = { -#endif - [0] = ACTION_LAYER_MOMENTARY(1), -}; diff --git a/keyboard/hhkb_rn42/led.c b/keyboard/hhkb_rn42/led.c deleted file mode 100644 index 8a08fe27..00000000 --- a/keyboard/hhkb_rn42/led.c +++ /dev/null @@ -1,33 +0,0 @@ -/* -Copyright 2011 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include "stdint.h" -#include "led.h" - - -/* HHKB has no LEDs */ -void led_set(uint8_t usb_led) -{ - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "timer.h" -#include "matrix.h" -#include "hhkb_avr.h" -#include -#include "suspend.h" -#include "lufa.h" - - -// matrix power saving -#define MATRIX_POWER_SAVE 10000 -static uint32_t matrix_last_modified = 0; - -// matrix state buffer(1:on, 0:off) -static matrix_row_t *matrix; -static matrix_row_t *matrix_prev; -static matrix_row_t _matrix0[MATRIX_ROWS]; -static matrix_row_t _matrix1[MATRIX_ROWS]; - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ -#ifdef DEBUG - debug_enable = true; - debug_keyboard = true; -#endif - - KEY_INIT(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; - for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; - matrix = _matrix0; - matrix_prev = _matrix1; -} - -uint8_t matrix_scan(void) -{ - uint8_t *tmp; - - tmp = matrix_prev; - matrix_prev = matrix; - matrix = tmp; - - // power on - if (!KEY_POWER_STATE()) KEY_POWER_ON(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - KEY_SELECT(row, col); - _delay_us(5); - - // Not sure this is needed. This just emulates HHKB controller's behaviour. - if (matrix_prev[row] & (1< 20/(1000000/TIMER_RAW_FREQ)) { - matrix[row] = matrix_prev[row]; - } - - _delay_us(5); - KEY_PREV_OFF(); - KEY_UNABLE(); - - // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE. - // This takes 25us or more to make sure KEY_STATE returns to idle state. - _delay_us(75); - } - if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32(); - } - // power off - if (KEY_POWER_STATE() && - (USB_DeviceState == DEVICE_STATE_Suspended || - USB_DeviceState == DEVICE_STATE_Unattached ) && - timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) { - KEY_POWER_OFF(); - suspend_power_down(); - } - return 1; -} - -bool matrix_is_modified(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) - return true; - } - return false; -} - -inline -bool matrix_has_ghost(void) -{ - return false; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & (1<