# Target file name (without extension). | |||||
PROJECT = ch | |||||
# Directory common source files exist | |||||
TMK_DIR = ../../tmk_core | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# project specific files | |||||
SRC = matrix.c \ | |||||
led.c | |||||
ifdef KEYMAP | |||||
SRC := keymap_$(KEYMAP).c $(SRC) | |||||
else | |||||
SRC := keymap_plain.c $(SRC) | |||||
endif | |||||
CONFIG_H = config.h | |||||
## chip/board settings | |||||
# - the next two should match the directories in | |||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) | |||||
# - For Teensies, FAMILY = KINETIS and SERIES is either | |||||
# KL2x (LC) or K20x (3.0,3.1,3.2). | |||||
MCU_FAMILY = KINETIS | |||||
MCU_SERIES = KL2x | |||||
# Linker script to use | |||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ | |||||
# or <this_dir>/ld/ | |||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC | |||||
# - LDSCRIPT = | |||||
# - MKL26Z64 for Teensy LC | |||||
# - MK20DX128 for Teensy 3.0 | |||||
# - MK20DX256 for Teensy 3.1 and 3.2 | |||||
MCU_LDSCRIPT = MKL26Z64 | |||||
# Startup code to use | |||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ | |||||
# - STARTUP = | |||||
# - kl2x for Teensy LC | |||||
# - k20x5 for Teensy 3.0 | |||||
# - k20x7 for Teensy 3.1 and 3.2 | |||||
MCU_STARTUP = kl2x | |||||
# Board: it should exist either in <chibios>/os/hal/boards/ | |||||
# or <this_dir>/boards | |||||
# - BOARD = | |||||
# - PJRC_TEENSY_LC for Teensy LC | |||||
# - PJRC_TEENSY_3 for Teensy 3.0 | |||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 | |||||
BOARD = PJRC_TEENSY_LC | |||||
# Cortex version | |||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 | |||||
MCU = cortex-m0 | |||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 | |||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x | |||||
ARMV = 6 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration | |||||
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = yes # Console for debug | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
include $(TMK_DIR)/tool/chibios/common.mk | |||||
include $(TMK_DIR)/tool/chibios/chibios.mk |
# Target file name (without extension). | |||||
PROJECT = ch | |||||
# Directory common source files exist | |||||
TMK_DIR = ../../tmk_core | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# project specific files | |||||
SRC = matrix.c \ | |||||
led.c | |||||
ifdef KEYMAP | |||||
SRC := keymap_$(KEYMAP).c $(SRC) | |||||
else | |||||
SRC := keymap_plain.c $(SRC) | |||||
endif | |||||
CONFIG_H = config.h | |||||
## chip/board settings | |||||
# - the next two should match the directories in | |||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) | |||||
# - For Teensies, FAMILY = KINETIS and SERIES is either | |||||
# KL2x (LC) or K20x (3.0,3.1,3.2). | |||||
MCU_FAMILY = KINETIS | |||||
MCU_SERIES = K20x | |||||
# Linker script to use | |||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ | |||||
# or <this_dir>/ld/ | |||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC | |||||
# - LDSCRIPT = | |||||
# - MKL26Z64 for Teensy LC | |||||
# - MK20DX128 for Teensy 3.0 | |||||
# - MK20DX256 for Teensy 3.1 and 3.2 | |||||
MCU_LDSCRIPT = MK20DX128 | |||||
# Startup code to use | |||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ | |||||
# - STARTUP = | |||||
# - kl2x for Teensy LC | |||||
# - k20x5 for Teensy 3.0 | |||||
# - k20x7 for Teensy 3.1 and 3.2 | |||||
MCU_STARTUP = k20x5 | |||||
# Board: it should exist either in <chibios>/os/hal/boards/ | |||||
# or <this_dir>/boards | |||||
# - BOARD = | |||||
# - PJRC_TEENSY_LC for Teensy LC | |||||
# - PJRC_TEENSY_3 for Teensy 3.0 | |||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 | |||||
BOARD = PJRC_TEENSY_3 | |||||
# Cortex version | |||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 | |||||
MCU = cortex-m0 | |||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 | |||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x | |||||
ARMV = 7 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration | |||||
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = yes # Console for debug | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
include $(TMK_DIR)/tool/chibios/common.mk | |||||
include $(TMK_DIR)/tool/chibios/chibios.mk |
/* | |||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/** | |||||
* @file templates/chconf.h | |||||
* @brief Configuration file template. | |||||
* @details A copy of this file must be placed in each project directory, it | |||||
* contains the application specific kernel settings. | |||||
* | |||||
* @addtogroup config | |||||
* @details Kernel related settings and hooks. | |||||
* @{ | |||||
*/ | |||||
#ifndef _CHCONF_H_ | |||||
#define _CHCONF_H_ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name System timers settings | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief System time counter resolution. | |||||
* @note Allowed values are 16 or 32 bits. | |||||
*/ | |||||
#define CH_CFG_ST_RESOLUTION 32 | |||||
/** | |||||
* @brief System tick frequency. | |||||
* @details Frequency of the system timer that drives the system ticks. This | |||||
* setting also defines the system tick time unit. | |||||
*/ | |||||
#define CH_CFG_ST_FREQUENCY 1000 | |||||
/** | |||||
* @brief Time delta constant for the tick-less mode. | |||||
* @note If this value is zero then the system uses the classic | |||||
* periodic tick. This value represents the minimum number | |||||
* of ticks that is safe to specify in a timeout directive. | |||||
* The value one is not valid, timeouts are rounded up to | |||||
* this value. | |||||
*/ | |||||
#define CH_CFG_ST_TIMEDELTA 0 | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Kernel parameters and options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Round robin interval. | |||||
* @details This constant is the number of system ticks allowed for the | |||||
* threads before preemption occurs. Setting this value to zero | |||||
* disables the preemption for threads with equal priority and the | |||||
* round robin becomes cooperative. Note that higher priority | |||||
* threads can still preempt, the kernel is always preemptive. | |||||
* @note Disabling the round robin preemption makes the kernel more compact | |||||
* and generally faster. | |||||
* @note The round robin preemption is not supported in tickless mode and | |||||
* must be set to zero in that case. | |||||
*/ | |||||
#define CH_CFG_TIME_QUANTUM 20 | |||||
/** | |||||
* @brief Managed RAM size. | |||||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||||
* then the whole available RAM is used. The core memory is made | |||||
* available to the heap allocator and/or can be used directly through | |||||
* the simplified core memory allocator. | |||||
* | |||||
* @note In order to let the OS manage the whole RAM the linker script must | |||||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||||
*/ | |||||
#define CH_CFG_MEMCORE_SIZE 0 | |||||
/** | |||||
* @brief Idle thread automatic spawn suppression. | |||||
* @details When this option is activated the function @p chSysInit() | |||||
* does not spawn the idle thread. The application @p main() | |||||
* function becomes the idle thread and must implement an | |||||
* infinite loop. | |||||
*/ | |||||
#define CH_CFG_NO_IDLE_THREAD FALSE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Performance options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief OS optimization. | |||||
* @details If enabled then time efficient rather than space efficient code | |||||
* is used when two possible implementations exist. | |||||
* | |||||
* @note This is not related to the compiler optimization options. | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_OPTIMIZE_SPEED TRUE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Subsystem options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Time Measurement APIs. | |||||
* @details If enabled then the time measurement APIs are included in | |||||
* the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_TM FALSE | |||||
/** | |||||
* @brief Threads registry APIs. | |||||
* @details If enabled then the registry APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_REGISTRY TRUE | |||||
/** | |||||
* @brief Threads synchronization APIs. | |||||
* @details If enabled then the @p chThdWait() function is included in | |||||
* the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_WAITEXIT TRUE | |||||
/** | |||||
* @brief Semaphores APIs. | |||||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_SEMAPHORES TRUE | |||||
/** | |||||
* @brief Semaphores queuing mode. | |||||
* @details If enabled then the threads are enqueued on semaphores by | |||||
* priority rather than in FIFO order. | |||||
* | |||||
* @note The default is @p FALSE. Enable this if you have special | |||||
* requirements. | |||||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||||
*/ | |||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE | |||||
/** | |||||
* @brief Mutexes APIs. | |||||
* @details If enabled then the mutexes APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MUTEXES TRUE | |||||
/** | |||||
* @brief Enables recursive behavior on mutexes. | |||||
* @note Recursive mutexes are heavier and have an increased | |||||
* memory footprint. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||||
*/ | |||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||||
/** | |||||
* @brief Conditional Variables APIs. | |||||
* @details If enabled then the conditional variables APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||||
*/ | |||||
#define CH_CFG_USE_CONDVARS TRUE | |||||
/** | |||||
* @brief Conditional Variables APIs with timeout. | |||||
* @details If enabled then the conditional variables APIs with timeout | |||||
* specification are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||||
*/ | |||||
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE | |||||
/** | |||||
* @brief Events Flags APIs. | |||||
* @details If enabled then the event flags APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_EVENTS TRUE | |||||
/** | |||||
* @brief Events Flags APIs with timeout. | |||||
* @details If enabled then the events APIs with timeout specification | |||||
* are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_EVENTS. | |||||
*/ | |||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||||
/** | |||||
* @brief Synchronous Messages APIs. | |||||
* @details If enabled then the synchronous messages APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MESSAGES TRUE | |||||
/** | |||||
* @brief Synchronous Messages queuing mode. | |||||
* @details If enabled then messages are served by priority rather than in | |||||
* FIFO order. | |||||
* | |||||
* @note The default is @p FALSE. Enable this if you have special | |||||
* requirements. | |||||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||||
*/ | |||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||||
/** | |||||
* @brief Mailboxes APIs. | |||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||||
* included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||||
*/ | |||||
#define CH_CFG_USE_MAILBOXES TRUE | |||||
/** | |||||
* @brief I/O Queues APIs. | |||||
* @details If enabled then the I/O queues APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_QUEUES TRUE | |||||
/** | |||||
* @brief Core Memory Manager APIs. | |||||
* @details If enabled then the core memory manager APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MEMCORE TRUE | |||||
/** | |||||
* @brief Heap Allocator APIs. | |||||
* @details If enabled then the memory heap allocator APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||||
* @p CH_CFG_USE_SEMAPHORES. | |||||
* @note Mutexes are recommended. | |||||
*/ | |||||
#define CH_CFG_USE_HEAP TRUE | |||||
/** | |||||
* @brief Memory Pools Allocator APIs. | |||||
* @details If enabled then the memory pools allocator APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MEMPOOLS TRUE | |||||
/** | |||||
* @brief Dynamic Threads APIs. | |||||
* @details If enabled then the dynamic threads creation APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||||
*/ | |||||
#define CH_CFG_USE_DYNAMIC TRUE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Debug options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Debug option, kernel statistics. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_STATISTICS FALSE | |||||
/** | |||||
* @brief Debug option, system state check. | |||||
* @details If enabled the correct call protocol for system APIs is checked | |||||
* at runtime. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_SYSTEM_STATE_CHECK TRUE | |||||
/** | |||||
* @brief Debug option, parameters checks. | |||||
* @details If enabled then the checks on the API functions input | |||||
* parameters are activated. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_ENABLE_CHECKS TRUE | |||||
/** | |||||
* @brief Debug option, consistency checks. | |||||
* @details If enabled then all the assertions in the kernel code are | |||||
* activated. This includes consistency checks inside the kernel, | |||||
* runtime anomalies and port-defined checks. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_ENABLE_ASSERTS TRUE | |||||
/** | |||||
* @brief Debug option, trace buffer. | |||||
* @details If enabled then the context switch circular trace buffer is | |||||
* activated. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_ENABLE_TRACE TRUE | |||||
/** | |||||
* @brief Debug option, stack checks. | |||||
* @details If enabled then a runtime stack check is performed. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note The stack check is performed in a architecture/port dependent way. | |||||
* It may not be implemented or some ports. | |||||
* @note The default failure mode is to halt the system with the global | |||||
* @p panic_msg variable set to @p NULL. | |||||
*/ | |||||
#define CH_DBG_ENABLE_STACK_CHECK TRUE | |||||
/** | |||||
* @brief Debug option, stacks initialization. | |||||
* @details If enabled then the threads working area is filled with a byte | |||||
* value when a thread is created. This can be useful for the | |||||
* runtime measurement of the used stack. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_FILL_THREADS TRUE | |||||
/** | |||||
* @brief Debug option, threads profiling. | |||||
* @details If enabled then a field is added to the @p thread_t structure that | |||||
* counts the system ticks occurred while executing the thread. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note This debug option is not currently compatible with the | |||||
* tickless mode. | |||||
*/ | |||||
#define CH_DBG_THREADS_PROFILING FALSE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Kernel hooks | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Threads descriptor structure extension. | |||||
* @details User fields added to the end of the @p thread_t structure. | |||||
*/ | |||||
#define CH_CFG_THREAD_EXTRA_FIELDS \ | |||||
/* Add threads custom fields here.*/ | |||||
/** | |||||
* @brief Threads initialization hook. | |||||
* @details User initialization code added to the @p chThdInit() API. | |||||
* | |||||
* @note It is invoked from within @p chThdInit() and implicitly from all | |||||
* the threads creation APIs. | |||||
*/ | |||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||||
/* Add threads initialization code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Threads finalization hook. | |||||
* @details User finalization code added to the @p chThdExit() API. | |||||
* | |||||
* @note It is inserted into lock zone. | |||||
* @note It is also invoked when the threads simply return in order to | |||||
* terminate. | |||||
*/ | |||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||||
/* Add threads finalization code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Context switch hook. | |||||
* @details This hook is invoked just before switching between threads. | |||||
*/ | |||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||||
/* Context switch code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Idle thread enter hook. | |||||
* @note This hook is invoked within a critical zone, no OS functions | |||||
* should be invoked from here. | |||||
* @note This macro can be used to activate a power saving mode. | |||||
*/ | |||||
#define CH_CFG_IDLE_ENTER_HOOK() { \ | |||||
} | |||||
/** | |||||
* @brief Idle thread leave hook. | |||||
* @note This hook is invoked within a critical zone, no OS functions | |||||
* should be invoked from here. | |||||
* @note This macro can be used to deactivate a power saving mode. | |||||
*/ | |||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||||
} | |||||
/** | |||||
* @brief Idle Loop hook. | |||||
* @details This hook is continuously invoked by the idle thread loop. | |||||
*/ | |||||
#define CH_CFG_IDLE_LOOP_HOOK() { \ | |||||
/* Idle loop code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief System tick event hook. | |||||
* @details This hook is invoked in the system tick handler immediately | |||||
* after processing the virtual timers queue. | |||||
*/ | |||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||||
/* System tick event code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief System halt hook. | |||||
* @details This hook is invoked in case to a system halting error before | |||||
* the system is halted. | |||||
*/ | |||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||||
/* System halt code here.*/ \ | |||||
} | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||||
/*===========================================================================*/ | |||||
#endif /* _CHCONF_H_ */ | |||||
/** @} */ |
/* | |||||
Copyright 2015 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6464 | |||||
#define DEVICE_VER 0x0001 | |||||
/* in python2: list(u"whatever".encode('utf-16-le')) */ | |||||
/* at most 32 characters or the ugly hack in usb_main.c borks */ | |||||
#define MANUFACTURER "TMK" | |||||
#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00' | |||||
#define PRODUCT "ChibiOS TMK test" | |||||
#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00' | |||||
#define DESCRIPTION "TMK keyboard firmware over ChibiOS" | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 1 | |||||
#define MATRIX_COLS 1 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
/* | |||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/** | |||||
* @file templates/halconf.h | |||||
* @brief HAL configuration header. | |||||
* @details HAL configuration file, this file allows to enable or disable the | |||||
* various device drivers from your application. You may also use | |||||
* this file in order to override the device drivers default settings. | |||||
* | |||||
* @addtogroup HAL_CONF | |||||
* @{ | |||||
*/ | |||||
#ifndef _HALCONF_H_ | |||||
#define _HALCONF_H_ | |||||
#include "mcuconf.h" | |||||
/** | |||||
* @brief Enables the PAL subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||||
#define HAL_USE_PAL TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the ADC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_ADC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the CAN subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||||
#define HAL_USE_CAN FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the DAC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_DAC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the EXT subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) | |||||
#define HAL_USE_EXT FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the GPT subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||||
#define HAL_USE_GPT FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the I2C subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||||
#define HAL_USE_I2C FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the I2S subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||||
#define HAL_USE_I2S FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the ICU subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||||
#define HAL_USE_ICU FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the MAC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_MAC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the MMC_SPI subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||||
#define HAL_USE_MMC_SPI FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the PWM subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||||
#define HAL_USE_PWM FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the RTC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_RTC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SDC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SDC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SERIAL subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SERIAL FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SERIAL over USB subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SERIAL_USB FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SPI subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SPI FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the UART subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||||
#define HAL_USE_UART FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the USB subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||||
#define HAL_USE_USB TRUE | |||||
#endif | |||||
#endif /* _HALCONF_H_ */ | |||||
/** @} */ |
# Teensy LC, 3.0, 3.1, 3.2 support | |||||
These ARM Teensies are now supported through [chibios](http://chibios.org). | |||||
You'll need to install an ARM toolchain, for instance from [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting. | |||||
Next, you'll need ChibiOS. The current release (3.0.2) does not have sufficient Kinetis support, so you'll need to get a patched version from [my fork](https://github.com/flabbergast/ChibiOS/tree/kinetis): you can download a current tree zipped from [here](https://github.com/flabbergast/ChibiOS/archive/kinetis.zip). Unpack the zip, rename the newly created `ChibiOS-kinetis` to `chibios`, and move it to `tmk/tool/chibios/` (so that the ChibiOS files reside in `tmk/tool/chibios/chibios`). | |||||
This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`. | |||||
For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`. | |||||
## About this onekey example | |||||
It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. | |||||
## Credits | |||||
The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions. | |||||
## Features that are not implemented yet | |||||
Currently only the more fancy suspend features are not there (i.e. "breathing" LED during suspend, power saving during suspend, sending a wakeup packet). The rest should work fine (reports either way are welcome). | |||||
# Matrix programming notes | |||||
The notes below explain what commands can be used to examine and set the status of Teensy pins. | |||||
## ChibiOS pin manipulation basics | |||||
### Pins | |||||
Each pin sits on a "port", each of which comprises at most 32 individual pins. | |||||
So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number. | |||||
Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number. | |||||
### Mode | |||||
A MCU pin can be in several modes. The basic command to set a pin mode is | |||||
palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP); | |||||
The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW). | |||||
### Setting | |||||
Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by | |||||
palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn); | |||||
or set LOW by | |||||
palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn); | |||||
### Reading | |||||
Reading pin status is done with | |||||
palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn); | |||||
The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`). |
/* | |||||
Copyright 2012,2013 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "keycode.h" | |||||
#include "action.h" | |||||
#include "action_macro.h" | |||||
#include "report.h" | |||||
#include "host.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "keymap.h" | |||||
static const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
{{KC_BTLD}}, | |||||
}; // to test: KC_CAPS, KT_BTLD | |||||
static const uint16_t fn_actions[] = { | |||||
}; | |||||
/* translates key to keycode */ | |||||
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) | |||||
{ | |||||
return keymaps[(layer)][(key.row)][(key.col)]; | |||||
} | |||||
/* translates Fn keycode to action */ | |||||
action_t keymap_fn_to_action(uint8_t keycode) | |||||
{ | |||||
return (action_t){ .code = fn_actions[FN_INDEX(keycode)] }; | |||||
} |
/* | |||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio. | |||||
This file is part of ChibiOS. | |||||
ChibiOS is free software; you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation; either version 3 of the License, or | |||||
(at your option) any later version. | |||||
ChibiOS is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* KL25Z64 memory setup. | |||||
*/ | |||||
ENTRY(Reset_Handler) | |||||
MEMORY | |||||
{ | |||||
flash0 : org = 0x00000000, len = 0xc0 | |||||
flashcfg : org = 0x00000400, len = 0x10 | |||||
flash : org = 0x00000410, len = 62k - 0x410 | |||||
eeprom_emu : org = 0x0000F800, len = 2k | |||||
ram : org = 0x1FFFF800, len = 8k | |||||
} | |||||
__ram_start__ = ORIGIN(ram); | |||||
__ram_size__ = LENGTH(ram); | |||||
__ram_end__ = __ram_start__ + __ram_size__; | |||||
__eeprom_workarea_start__ = ORIGIN(eeprom_emu); | |||||
__eeprom_workarea_size__ = LENGTH(eeprom_emu); | |||||
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; | |||||
SECTIONS | |||||
{ | |||||
. = 0; | |||||
.isr : ALIGN(4) SUBALIGN(4) | |||||
{ | |||||
KEEP(*(.vectors)) | |||||
} > flash0 | |||||
.cfmprotect : ALIGN(4) SUBALIGN(4) | |||||
{ | |||||
KEEP(*(.cfmconfig)) | |||||
} > flashcfg | |||||
_text = .; | |||||
constructors : ALIGN(4) SUBALIGN(4) | |||||
{ | |||||
PROVIDE(__init_array_start = .); | |||||
KEEP(*(SORT(.init_array.*))) | |||||
KEEP(*(.init_array)) | |||||
PROVIDE(__init_array_end = .); | |||||
} > flash | |||||
destructors : ALIGN(4) SUBALIGN(4) | |||||
{ | |||||
PROVIDE(__fini_array_start = .); | |||||
KEEP(*(.fini_array)) | |||||
KEEP(*(SORT(.fini_array.*))) | |||||
PROVIDE(__fini_array_end = .); | |||||
} > flash | |||||
.text : ALIGN(4) SUBALIGN(4) | |||||
{ | |||||
*(.text) | |||||
*(.text.*) | |||||
*(.rodata) | |||||
*(.rodata.*) | |||||
*(.glue_7t) | |||||
*(.glue_7) | |||||
*(.gcc*) | |||||
} > flash | |||||
.ARM.extab : | |||||
{ | |||||
*(.ARM.extab* .gnu.linkonce.armextab.*) | |||||
} > flash | |||||
.ARM.exidx : { | |||||
PROVIDE(__exidx_start = .); | |||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*) | |||||
PROVIDE(__exidx_end = .); | |||||
} > flash | |||||
.eh_frame_hdr : | |||||
{ | |||||
*(.eh_frame_hdr) | |||||
} > flash | |||||
.eh_frame : ONLY_IF_RO | |||||
{ | |||||
*(.eh_frame) | |||||
} > flash | |||||
.textalign : ONLY_IF_RO | |||||
{ | |||||
. = ALIGN(8); | |||||
} > flash | |||||
_etext = .; | |||||
_textdata = _etext; | |||||
.stacks : | |||||
{ | |||||
. = ALIGN(8); | |||||
__main_stack_base__ = .; | |||||
. += __main_stack_size__; | |||||
. = ALIGN(8); | |||||
__main_stack_end__ = .; | |||||
__process_stack_base__ = .; | |||||
__main_thread_stack_base__ = .; | |||||
. += __process_stack_size__; | |||||
. = ALIGN(8); | |||||
__process_stack_end__ = .; | |||||
__main_thread_stack_end__ = .; | |||||
} > ram | |||||
.data : | |||||
{ | |||||
. = ALIGN(4); | |||||
PROVIDE(_data = .); | |||||
*(.data) | |||||
. = ALIGN(4); | |||||
*(.data.*) | |||||
. = ALIGN(4); | |||||
*(.ramtext) | |||||
. = ALIGN(4); | |||||
PROVIDE(_edata = .); | |||||
} > ram AT > flash | |||||
.bss : | |||||
{ | |||||
. = ALIGN(4); | |||||
PROVIDE(_bss_start = .); | |||||
*(.bss) | |||||
. = ALIGN(4); | |||||
*(.bss.*) | |||||
. = ALIGN(4); | |||||
*(COMMON) | |||||
. = ALIGN(4); | |||||
PROVIDE(_bss_end = .); | |||||
} > ram | |||||
} | |||||
PROVIDE(end = .); | |||||
_end = .; | |||||
__heap_base__ = _end; | |||||
__heap_end__ = __ram_end__; |
/* | |||||
Copyright 2012 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "hal.h" | |||||
#include "led.h" | |||||
void led_set(uint8_t usb_led) { | |||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||||
// output high | |||||
palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); | |||||
} else { | |||||
// Hi-Z | |||||
palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT); | |||||
} | |||||
} |
/* | |||||
Copyright 2012 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "ch.h" | |||||
#include "hal.h" | |||||
/* | |||||
* scan matrix | |||||
*/ | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "matrix.h" | |||||
#include "wait.h" | |||||
#ifndef DEBOUNCE | |||||
# define DEBOUNCE 5 | |||||
#endif | |||||
static uint8_t debouncing = DEBOUNCE; | |||||
/* matrix state(1:on, 0:off) */ | |||||
static matrix_row_t matrix[MATRIX_ROWS]; | |||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||||
static matrix_row_t read_cols(void); | |||||
static void init_cols(void); | |||||
static void unselect_rows(void); | |||||
static void select_row(uint8_t row); | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
#define LED_ON() do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0) | |||||
#define LED_OFF() do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) | |||||
#define LED_TGL() do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) | |||||
void matrix_init(void) | |||||
{ | |||||
// initialize row and col | |||||
unselect_rows(); | |||||
init_cols(); | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||||
matrix[i] = 0; | |||||
matrix_debouncing[i] = 0; | |||||
} | |||||
//debug | |||||
debug_matrix = true; | |||||
LED_ON(); | |||||
wait_ms(500); | |||||
LED_OFF(); | |||||
} | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
select_row(i); | |||||
wait_us(30); // without this wait read unstable value. | |||||
matrix_row_t cols = read_cols(); | |||||
if (matrix_debouncing[i] != cols) { | |||||
matrix_debouncing[i] = cols; | |||||
if (debouncing) { | |||||
debug("bounce!: "); debug_hex(debouncing); debug("\n"); | |||||
} | |||||
debouncing = DEBOUNCE; | |||||
} | |||||
unselect_rows(); | |||||
} | |||||
if (debouncing) { | |||||
if (--debouncing) { | |||||
wait_ms(1); | |||||
} else { | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
matrix[i] = matrix_debouncing[i]; | |||||
} | |||||
} | |||||
} | |||||
return 1; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||||
} | |||||
inline | |||||
matrix_row_t matrix_get_row(uint8_t row) | |||||
{ | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 0123456789ABCDEF\n"); | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
phex(row); print(": "); | |||||
pbin_reverse16(matrix_get_row(row)); | |||||
print("\n"); | |||||
} | |||||
} | |||||
/* Column pin configuration | |||||
*/ | |||||
static void init_cols(void) | |||||
{ | |||||
// internal pull-up | |||||
palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP); | |||||
} | |||||
/* Returns status of switches(1:on, 0:off) */ | |||||
static matrix_row_t read_cols(void) | |||||
{ | |||||
return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0)); | |||||
// | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1)) | |||||
} | |||||
/* Row pin configuration | |||||
*/ | |||||
static void unselect_rows(void) | |||||
{ | |||||
palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z | |||||
} | |||||
static void select_row(uint8_t row) | |||||
{ | |||||
(void)row; | |||||
// Output low to select | |||||
switch (row) { | |||||
case 0: | |||||
palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5); | |||||
break; | |||||
} | |||||
} |
/* | |||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
#ifndef _MCUCONF_H_ | |||||
#define _MCUCONF_H_ | |||||
#define KL2x_MCUCONF | |||||
/* | |||||
* HAL driver system settings. | |||||
*/ | |||||
#if 1 | |||||
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ | |||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE | |||||
#define KINETIS_PLLCLK_FREQUENCY 96000000UL | |||||
#define KINETIS_SYSCLK_FREQUENCY 48000000UL | |||||
#endif | |||||
#if 0 | |||||
/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ | |||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI | |||||
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ | |||||
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ | |||||
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ | |||||
#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ | |||||
#endif | |||||
/* | |||||
* SERIAL driver system settings. | |||||
*/ | |||||
#define KINETIS_SERIAL_USE_UART0 TRUE | |||||
/* | |||||
* USB driver settings | |||||
*/ | |||||
#define KINETIS_USB_USE_USB0 TRUE | |||||
/* Need to redefine this, since the default is for K20x */ | |||||
/* This is for Teensy LC; you should comment it out (or change to 5) | |||||
* for Teensy 3.x */ | |||||
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 | |||||
#endif /* _MCUCONF_H_ */ |