SRC += host.c \ | |||||
keyboard.c \ | |||||
command.c \ | |||||
layer.c \ | |||||
timer.c \ | |||||
print.c \ | |||||
bootloader.c \ | |||||
util.c | |||||
COMMON_DIR = common | |||||
SRC += $(COMMON_DIR)/host.c \ | |||||
$(COMMON_DIR)/keyboard.c \ | |||||
$(COMMON_DIR)/command.c \ | |||||
$(COMMON_DIR)/layer.c \ | |||||
$(COMMON_DIR)/timer.c \ | |||||
$(COMMON_DIR)/print.c \ | |||||
$(COMMON_DIR)/bootloader.c \ | |||||
$(COMMON_DIR)/util.c | |||||
# Option modules | # Option modules | ||||
ifdef MOUSEKEY_ENABLE | ifdef MOUSEKEY_ENABLE | ||||
SRC += mousekey.c | |||||
SRC += $(COMMON_DIR)/mousekey.c | |||||
OPT_DEFS += -DMOUSEKEY_ENABLE | OPT_DEFS += -DMOUSEKEY_ENABLE | ||||
endif | endif | ||||
ifdef PS2_MOUSE_ENABLE | ifdef PS2_MOUSE_ENABLE | ||||
SRC += ps2.c \ | |||||
ps2_mouse.c | |||||
SRC += $(COMMON_DIR)/ps2.c \ | |||||
$(COMMON_DIR)/ps2_mouse.c | |||||
OPT_DEFS += -DPS2_MOUSE_ENABLE | OPT_DEFS += -DPS2_MOUSE_ENABLE | ||||
endif | endif | ||||
* |Gui |Alt |Space |Alt |xxx| | * |Gui |Alt |Space |Alt |xxx| | ||||
* `--------------------------------------------' | * `--------------------------------------------' | ||||
*/ | */ | ||||
KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \ | CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \ | ||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | ||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ | LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
/* controller configuration */ | |||||
#include "controller_teensy.h" | |||||
/* USB Device descriptor */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0xBEE6 | |||||
#define DEVICE_VER 0x0202 | |||||
#define MANUFACTURER t.m.k. | |||||
#define PRODUCT Macway mod(LUFA) | |||||
/* message strings */ | |||||
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod(LUFA) | |||||
/* matrix size */ | |||||
#define MATRIX_ROWS 9 | |||||
#define MATRIX_COLS 8 | |||||
/* define if matrix has ghost */ | |||||
#define MATRIX_HAS_GHOST | |||||
/* Set 0 if need no debouncing */ | |||||
#define DEBOUNCE 5 | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \ | |||||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \ | |||||
) | |||||
/* layer switching */ | |||||
#define LAYER_SWITCH_DELAY 100 | |||||
#define LAYER_SEND_FN_TERM 300 | |||||
/* mouse keys */ | |||||
#ifdef MOUSEKEY_ENABLE | |||||
# define MOUSEKEY_DELAY_TIME 192 | |||||
#endif | |||||
/* PS/2 mouse */ | |||||
#ifdef PS2_MOUSE_ENABLE | |||||
# define PS2_CLOCK_PORT PORTF | |||||
# define PS2_CLOCK_PIN PINF | |||||
# define PS2_CLOCK_DDR DDRF | |||||
# define PS2_CLOCK_BIT 0 | |||||
# define PS2_DATA_PORT PORTF | |||||
# define PS2_DATA_PIN PINF | |||||
# define PS2_DATA_DDR DDRF | |||||
# define PS2_DATA_BIT 1 | |||||
#endif | |||||
#endif |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* Keymap for Macway mod | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/pgmspace.h> | |||||
#include "usb_keycodes.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "keymap.h" | |||||
// Convert physical keyboard layout to matrix array. | |||||
// This is a macro to define keymap easily in keyboard layout form. | |||||
#define KEYMAP( \ | |||||
K11, K10, K20, K30, K40, K41, K51, K50, K60, K70, K80, K81, K61, K02, \ | |||||
K12, K13, K23, K33, K43, K42, K52, K53, K63, K73, K83, K82, K62, K01, \ | |||||
K15, K14, K24, K34, K44, K45, K55, K54, K64, K74, K84, K85, K06, \ | |||||
K67, K16, K26, K36, K46, K47, K57, K56, K66, K76, K87, K32, K35, \ | |||||
K75, K22, K00, K07, K21, K04, K37, K27, K17 \ | |||||
) { \ | |||||
{ KB_##K00, KB_##K01, KB_##K02, KB_NO, KB_##K04, KB_NO, KB_##K06, KB_##K07 }, \ | |||||
{ KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \ | |||||
{ KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_NO, KB_##K26, KB_##K27 }, \ | |||||
{ KB_##K30, KB_NO, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \ | |||||
{ KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \ | |||||
{ KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \ | |||||
{ KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \ | |||||
{ KB_##K70, KB_NO, KB_NO, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_NO }, \ | |||||
{ KB_##K80, KB_##K81, KB_##K82, KB_##K83, KB_##K84, KB_##K85, KB_NO, KB_##K87 } \ | |||||
} | |||||
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) | |||||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. | |||||
static const uint8_t PROGMEM fn_layer[] = { | |||||
0, // Fn0 | |||||
1, // Fn1 | |||||
2, // Fn2 | |||||
3, // Fn3 | |||||
4, // Fn4 | |||||
0, // Fn5 | |||||
3, // Fn6 | |||||
3 // Fn7 | |||||
}; | |||||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. | |||||
// See layer.c for details. | |||||
static const uint8_t PROGMEM fn_keycode[] = { | |||||
KB_NO, // Fn0 | |||||
KB_NO, // Fn1 | |||||
KB_SLSH, // Fn2 | |||||
KB_SCLN, // Fn3 | |||||
KB_SPC, // Fn4 | |||||
KB_NO, // Fn5 | |||||
KB_NO, // Fn6 | |||||
KB_NO // Fn7 | |||||
}; | |||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Layer 0: Default Layer | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | |||||
* |-----------------------------------------------------' | | |||||
* |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn1| | |||||
* |-----------------------------------------------------------| | |||||
* |Fn7|Gui |Alt |Fn4 |Alt |Gui|Fn6|Fn6|Ctr| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ | |||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ | |||||
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \ | |||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ | |||||
FN7, LGUI,LALT,FN4, RALT,BSLS,FN6, FN6, RCTL), | |||||
/* Layer 1: HHKB mode (HHKB Fn) | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | | |||||
* |-----------------------------------------------------------| | |||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | | | | |||||
* |-----------------------------------------------------' | | |||||
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | | | +| -|End|PgD|Dow|Shift |xxx| | |||||
* |-----------------------------------------------------------| | |||||
* | |Gui |Alt | |Alt |Gui| | |Ctr| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \ | |||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | |||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ | |||||
NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL), | |||||
/* Layer 2: Vi mode (Quote/Rmeta) | |||||
* ,-----------------------------------------------------------. | |||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` | | |||||
* |-----------------------------------------------------------| | |||||
* | \ |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End| | | | | | |||||
* |-----------------------------------------------------' | | |||||
* |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | | \ | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | | |Hom|PgD|PgU|End|xxx|Shift | | | |||||
* |-----------------------------------------------------------| | |||||
* | |Gui |Alt |Space |Alt |Gui|Fn6|Fn6|Ctr| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \ | |||||
BSLS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, NO, \ | |||||
LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, BSLS, \ | |||||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,NO, \ | |||||
NO, LGUI,LALT,SPC, RALT,RGUI,FN6, FN6, RCTL), | |||||
/* Layer 3: Mouse mode (Semicolon) | |||||
* ,-----------------------------------------------------------. | |||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` | | |||||
* |-----------------------------------------------------------| | |||||
* | \ |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR| | | | | | |||||
* |-----------------------------------------------------' | | |||||
* |Contro| |McL|McD|McR| |McL|McD|McU|McR|xxx| | \ | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | |Mb1|Mb2|Mb3|Mb2|Mb1| | | |Shift | | | |||||
* |-----------------------------------------------------------| | |||||
* |xxx|Gui |Alt |Mb1 |Alt | | | | | | |||||
* `-----------------------------------------------------------' | |||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel | |||||
*/ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \ | |||||
BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ | |||||
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ | |||||
LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ | |||||
FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO), | |||||
/* Layer 4: Matias half keyboard style (Space) | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | | |||||
* |-----------------------------------------------------------| | |||||
* |Backs| P| O| I| U| Y| T| R| E| W| Q|Tab|Tab| | | |||||
* |-----------------------------------------------------' | | |||||
* |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | | | |||||
* |-----------------------------------------------------------| | |||||
* | |Gui |Alt |xxxxxxxxxxxxxxxxxxxxxx|Alt |Gui| | |Ctr| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, ESC, \ | |||||
BSPC,P, O, I, U, Y, T, R, E, W, Q, TAB, TAB, TAB, \ | |||||
LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \ | |||||
LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \ | |||||
NO, LGUI,LALT,FN4, RALT,RGUI,NO, NO, RCTL), | |||||
}; | |||||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) | |||||
{ | |||||
return KEYCODE(layer, row, col); | |||||
} | |||||
uint8_t keymap_fn_layer(uint8_t fn_bits) | |||||
{ | |||||
return pgm_read_byte(&fn_layer[biton(fn_bits)]); | |||||
} | |||||
uint8_t keymap_fn_keycode(uint8_t fn_bits) | |||||
{ | |||||
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); | |||||
} |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "stdint.h" | |||||
#include "led.h" | |||||
void led_set(uint8_t usb_led) | |||||
{ | |||||
} |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* scan matrix | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/io.h> | |||||
#include <util/delay.h> | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "matrix.h" | |||||
#if (MATRIX_COLS > 16) | |||||
# error "MATRIX_COLS must not exceed 16" | |||||
#endif | |||||
#if (MATRIX_ROWS > 255) | |||||
# error "MATRIX_ROWS must not exceed 255" | |||||
#endif | |||||
#ifndef DEBOUNCE | |||||
# define DEBOUNCE 0 | |||||
#endif | |||||
static uint8_t debouncing = DEBOUNCE; | |||||
// matrix state buffer(1:on, 0:off) | |||||
#if (MATRIX_COLS <= 8) | |||||
static uint8_t *matrix; | |||||
static uint8_t *matrix_prev; | |||||
static uint8_t _matrix0[MATRIX_ROWS]; | |||||
static uint8_t _matrix1[MATRIX_ROWS]; | |||||
#else | |||||
static uint16_t *matrix; | |||||
static uint16_t *matrix_prev; | |||||
static uint16_t _matrix0[MATRIX_ROWS]; | |||||
static uint16_t _matrix1[MATRIX_ROWS]; | |||||
#endif | |||||
#ifdef MATRIX_HAS_GHOST | |||||
static bool matrix_has_ghost_in_row(uint8_t row); | |||||
#endif | |||||
static uint8_t read_col(void); | |||||
static void unselect_rows(void); | |||||
static void select_row(uint8_t row); | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
void matrix_init(void) | |||||
{ | |||||
// initialize row and col | |||||
unselect_rows(); | |||||
// Input with pull-up(DDR:0, PORT:1) | |||||
DDRB = 0x00; | |||||
PORTB = 0xFF; | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; | |||||
matrix = _matrix0; | |||||
matrix_prev = _matrix1; | |||||
} | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
if (!debouncing) { | |||||
uint8_t *tmp = matrix_prev; | |||||
matrix_prev = matrix; | |||||
matrix = tmp; | |||||
} | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
unselect_rows(); | |||||
select_row(i); | |||||
_delay_us(30); // without this wait read unstable value. | |||||
if (matrix[i] != (uint8_t)~read_col()) { | |||||
matrix[i] = (uint8_t)~read_col(); | |||||
if (debouncing) { | |||||
debug("bounce!: "); debug_hex(debouncing); print("\n"); | |||||
} | |||||
debouncing = DEBOUNCE; | |||||
} | |||||
} | |||||
unselect_rows(); | |||||
if (debouncing) { | |||||
debouncing--; | |||||
} | |||||
return 1; | |||||
} | |||||
bool matrix_is_modified(void) | |||||
{ | |||||
if (debouncing) return false; | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
if (matrix[i] != matrix_prev[i]) { | |||||
return true; | |||||
} | |||||
} | |||||
return false; | |||||
} | |||||
inline | |||||
bool matrix_has_ghost(void) | |||||
{ | |||||
#ifdef MATRIX_HAS_GHOST | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
if (matrix_has_ghost_in_row(i)) | |||||
return true; | |||||
} | |||||
#endif | |||||
return false; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix[row] & (1<<col)); | |||||
} | |||||
inline | |||||
#if (MATRIX_COLS <= 8) | |||||
uint8_t matrix_get_row(uint8_t row) | |||||
#else | |||||
uint16_t matrix_get_row(uint8_t row) | |||||
#endif | |||||
{ | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 01234567\n"); | |||||
for (uint8_t row = 0; row < matrix_rows(); row++) { | |||||
phex(row); print(": "); | |||||
#if (MATRIX_COLS <= 8) | |||||
pbin_reverse(matrix_get_row(row)); | |||||
#else | |||||
pbin_reverse16(matrix_get_row(row)); | |||||
#endif | |||||
#ifdef MATRIX_HAS_GHOST | |||||
if (matrix_has_ghost_in_row(row)) { | |||||
print(" <ghost"); | |||||
} | |||||
#endif | |||||
print("\n"); | |||||
} | |||||
} | |||||
uint8_t matrix_key_count(void) | |||||
{ | |||||
uint8_t count = 0; | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
#if (MATRIX_COLS <= 8) | |||||
count += bitpop(matrix[i]); | |||||
#else | |||||
count += bitpop16(matrix[i]); | |||||
#endif | |||||
} | |||||
return count; | |||||
} | |||||
#ifdef MATRIX_HAS_GHOST | |||||
inline | |||||
static bool matrix_has_ghost_in_row(uint8_t row) | |||||
{ | |||||
// no ghost exists in case less than 2 keys on | |||||
if (((matrix[row] - 1) & matrix[row]) == 0) | |||||
return false; | |||||
// ghost exists in case same state as other row | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||||
if (i != row && (matrix[i] & matrix[row]) == matrix[row]) | |||||
return true; | |||||
} | |||||
return false; | |||||
} | |||||
#endif | |||||
inline | |||||
static uint8_t read_col(void) | |||||
{ | |||||
return PINB; | |||||
} | |||||
inline | |||||
static void unselect_rows(void) | |||||
{ | |||||
// Hi-Z(DDR:0, PORT:0) to unselect | |||||
DDRC &= ~0b01000000; // PC: 6 | |||||
PORTC &= ~0b11000000; | |||||
DDRD &= ~0b11100111; // PD: 7,6,5,2,1,0 | |||||
PORTD &= ~0b11000111; | |||||
DDRF &= ~0b11000000; // PF: 7,6 | |||||
PORTF &= ~0b11000000; | |||||
} | |||||
inline | |||||
static void select_row(uint8_t row) | |||||
{ | |||||
// Output low(DDR:1, PORT:0) to select | |||||
// row: 0 1 2 3 4 5 6 7 8 | |||||
// pin: PD0, PD5, PD7, PF6, PD6, PD1, PD2, PC6, PF7 | |||||
switch (row) { | |||||
case 0: | |||||
DDRD |= (1<<0); | |||||
PORTD &= ~(1<<0); | |||||
break; | |||||
case 1: | |||||
DDRD |= (1<<5); | |||||
PORTD &= ~(1<<5); | |||||
break; | |||||
case 2: | |||||
DDRD |= (1<<7); | |||||
PORTD &= ~(1<<7); | |||||
break; | |||||
case 3: | |||||
DDRF |= (1<<6); | |||||
PORTF &= ~(1<<6); | |||||
break; | |||||
case 4: | |||||
DDRD |= (1<<6); | |||||
PORTD &= ~(1<<6); | |||||
break; | |||||
case 5: | |||||
DDRD |= (1<<1); | |||||
PORTD &= ~(1<<1); | |||||
break; | |||||
case 6: | |||||
DDRD |= (1<<2); | |||||
PORTD &= ~(1<<2); | |||||
break; | |||||
case 7: | |||||
DDRC |= (1<<6); | |||||
PORTC &= ~(1<<6); | |||||
break; | |||||
case 8: | |||||
DDRF |= (1<<7); | |||||
PORTF &= ~(1<<7); | |||||
break; | |||||
} | |||||
} |
# Target file name (without extension). | |||||
TARGET = macway | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# keyboard dependent files | |||||
SRC = main.c \ | |||||
keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
#MCU = at90usb162 # Teensy 1.0 | |||||
MCU = atmega32u4 # Teensy 2.0 | |||||
#MCU = at90usb646 # Teensy++ 1.0 | |||||
#MCU = at90usb1286 # Teensy++ 2.0 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#---------------- Programming Options -------------------------- | |||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
include $(TOP_DIR)/protocol/pjrc.mk | |||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
# Hey Emacs, this is a -*- makefile -*- | |||||
#---------------------------------------------------------------------------- | |||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. | |||||
# >> Modified for use with the LUFA project. << | |||||
# | |||||
# Released to the Public Domain | |||||
# | |||||
# Additional material for this makefile was written by: | |||||
# Peter Fleury | |||||
# Tim Henigan | |||||
# Colin O'Flynn | |||||
# Reiner Patommel | |||||
# Markus Pfaff | |||||
# Sander Pool | |||||
# Frederik Rouleau | |||||
# Carlos Lamas | |||||
# Dean Camera | |||||
# Opendous Inc. | |||||
# Denver Gingerich | |||||
# | |||||
#---------------------------------------------------------------------------- | #---------------------------------------------------------------------------- | ||||
# On command line: | # On command line: | ||||
# | # | ||||
# | # | ||||
# make extcoff = Convert ELF to AVR Extended COFF. | # make extcoff = Convert ELF to AVR Extended COFF. | ||||
# | # | ||||
# make program = Download the hex file to the device, using avrdude. | |||||
# Please customize the avrdude settings below first! | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | # | ||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | # make dfu = Download the hex file to the device, using dfu-programmer (must | ||||
# have dfu-programmer installed). | # have dfu-programmer installed). | ||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | # make flip-ee = Download the eeprom file to the device, using Atmel FLIP | ||||
# (must have Atmel FLIP installed). | # (must have Atmel FLIP installed). | ||||
# | # | ||||
# make doxygen = Generate DoxyGen documentation for the project (must have | |||||
# DoxyGen installed) | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | # with avr-gdb or avr-insight as the front end for debugging. | ||||
# | # | ||||
# make filename.s = Just compile filename.c into the assembler code only. | # make filename.s = Just compile filename.c into the assembler code only. | ||||
# To rebuild project do "make clean" then "make all". | # To rebuild project do "make clean" then "make all". | ||||
#---------------------------------------------------------------------------- | #---------------------------------------------------------------------------- | ||||
# Target file name (without extension). | |||||
TARGET = macway_lufa | |||||
# Directory common source filess exist | # Directory common source filess exist | ||||
TOP_DIR = ../.. | TOP_DIR = ../.. | ||||
# Directory keyboard dependent files exist | # Directory keyboard dependent files exist | ||||
TARGET_DIR = . | TARGET_DIR = . | ||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
SRC += keymap.c \ | |||||
matrix.c \ | |||||
led.c \ | |||||
protocol/pjrc/bootloader_teensy.c | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
CONFIG_H = config.h | |||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring | |||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called | |||||
# "Board" inside the application directory. | |||||
BOARD = USBKEY | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | # Processor frequency. | ||||
# This will define a symbol, F_CPU, in all source code files equal to the | # This will define a symbol, F_CPU, in all source code files equal to the | ||||
F_CPU = 16000000 | F_CPU = 16000000 | ||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | # Input clock frequency. | ||||
# This will define a symbol, F_USB, in all source code files equal to the | # This will define a symbol, F_USB, in all source code files equal to the | ||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | # input clock frequency (before any prescaling is performed) in Hz. This value may | ||||
F_USB = $(F_CPU) | F_USB = $(F_CPU) | ||||
# Target file name (without extension). | |||||
TARGET = lufa | |||||
# Path to the LUFA library | |||||
LUFA_PATH = ../../protocol | |||||
# Create the LUFA source path variables by including the LUFA root makefile | |||||
include $(LUFA_PATH)/LUFA/makefile | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
LUFA_SRC = $(TARGET).c \ | |||||
descriptor.c \ | |||||
$(LUFA_SRC_USB) \ | |||||
$(LUFA_SRC_USBCLASS) | |||||
SRC = $(subst $(LUFA_PATH)/LUFA/,,$(LUFA_SRC)) | |||||
SRC += keymap.c \ | |||||
matrix.c \ | |||||
led.c \ | |||||
pjrc/bootloader_teensy.c | |||||
CONFIG_H = config.h | |||||
# Build Options | # Build Options | ||||
# comment out to disable the options. | # comment out to disable the options. | ||||
#NKRO_ENABLE = yes # USB Nkey Rollover | #NKRO_ENABLE = yes # USB Nkey Rollover | ||||
# LUFA library compile-time options and predefined tokens | |||||
LUFA_OPTS = -D USB_DEVICE_ONLY | |||||
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 | |||||
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 | |||||
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS | |||||
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" | |||||
OPT_DEFS = -DF_CPU=$(F_CPU)UL | |||||
OPT_DEFS += -DF_USB=$(F_USB)UL | |||||
OPT_DEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) | |||||
OPT_DEFS += $(LUFA_OPTS) | |||||
# Search Path | # Search Path | ||||
VPATH += $(TARGET_DIR) | VPATH += $(TARGET_DIR) | ||||
VPATH += $(LUFA_PATH)/LUFA | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | include $(TOP_DIR)/common.mk | ||||
include $(TOP_DIR)/rules.mk | include $(TOP_DIR)/rules.mk | ||||
test: | |||||
echo $(SRC) |
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = macway_pjrc | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# keyboard dependent files | |||||
SRC = protocol/pjrc/main.c \ | |||||
keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
#MCU = at90usb162 # Teensy 1.0 | |||||
MCU = atmega32u4 # Teensy 2.0 | |||||
#MCU = at90usb646 # Teensy++ 1.0 | |||||
#MCU = at90usb1286 # Teensy++ 2.0 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#---------------- Programming Options -------------------------- | |||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
/* controller configuration */ | /* controller configuration */ | ||||
#include "controller_teensy.h" | #include "controller_teensy.h" | ||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | #define VENDOR_ID 0xFEED | ||||
#define PRODUCT_ID 0xBEE0 | #define PRODUCT_ID 0xBEE0 | ||||
#define DEVICE_VER 0x0202 | |||||
#define MANUFACTURER t.m.k. | #define MANUFACTURER t.m.k. | ||||
#define PRODUCT Macway mod | #define PRODUCT Macway mod | ||||
/* message strings */ | |||||
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod | #define DESCRIPTION t.m.k. keyboard firmware for Macway mod | ||||
3, // Fn3 | 3, // Fn3 | ||||
4, // Fn4 | 4, // Fn4 | ||||
0, // Fn5 | 0, // Fn5 | ||||
2, // Fn6 | |||||
3, // Fn6 | |||||
3 // Fn7 | 3 // Fn7 | ||||
}; | }; | ||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ | TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ | ||||
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \ | LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \ | ||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ | LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ | ||||
FN7, LGUI,LALT,FN4, RALT,BSLS,GRV, FN6, RCTL), | |||||
FN7, LGUI,LALT,FN4, RALT,GRV, FN6, FN6, RCTL), | |||||
/* Layer 1: HHKB mode (HHKB Fn) | /* Layer 1: HHKB mode (HHKB Fn) | ||||
* | |Gui |Alt | |Alt |Gui| | |Ctr| | * | |Gui |Alt | |Alt |Gui| | |Ctr| | ||||
* `-----------------------------------------------------------' | * `-----------------------------------------------------------' | ||||
*/ | */ | ||||
KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \ | CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \ | ||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | ||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ | LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ | ||||
BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ | BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ | ||||
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ | LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ | ||||
LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ | LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ | ||||
FN7, LGUI,LALT,BTN1,RALT,NO, NO, NO, NO), | |||||
FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO), | |||||
/* Layer 4: Matias half keyboard style (Space) | /* Layer 4: Matias half keyboard style (Space) |
LUFA_DIR = protocol/lufa | |||||
# Path to the LUFA library | |||||
LUFA_PATH = $(TOP_DIR)/protocol/lufa/LUFA-120219 | |||||
# Create the LUFA source path variables by including the LUFA root makefile | |||||
include $(LUFA_PATH)/LUFA/makefile | |||||
LUFA_SRC = $(LUFA_DIR)/lufa.c \ | |||||
$(LUFA_DIR)/descriptor.c \ | |||||
$(LUFA_SRC_USB) | |||||
SRC += $(subst $(LUFA_PATH)/,,$(LUFA_SRC)) | |||||
# Search Path | |||||
VPATH += $(LUFA_PATH) | |||||
# Option modules | |||||
#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||||
#endif | |||||
#ifdef EXTRAKEY_ENABLE | |||||
#endif | |||||
# LUFA library compile-time options and predefined tokens | |||||
LUFA_OPTS = -D USB_DEVICE_ONLY | |||||
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 | |||||
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 | |||||
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS | |||||
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" | |||||
OPT_DEFS += -DF_USB=$(F_USB)UL | |||||
OPT_DEFS += -DARCH=ARCH_$(ARCH) | |||||
OPT_DEFS += $(LUFA_OPTS) | |||||
OPT_DEFS += -DHOST_LUFA |
OPT_DEFS += -DHOST_PJRC | |||||
SRC += pjrc.c \ | |||||
usb_keyboard.c \ | |||||
usb_debug.c \ | |||||
usb.c \ | |||||
bootloader_teensy.c | |||||
PJRC_DIR = protocol/pjrc | |||||
OPT_DEFS += -DHOST_PJRC | |||||
# Search Path | |||||
VPATH += $(TOP_DIR)/protocol/pjrc | |||||
SRC += $(PJRC_DIR)/pjrc.c \ | |||||
$(PJRC_DIR)/usb_keyboard.c \ | |||||
$(PJRC_DIR)/usb_debug.c \ | |||||
$(PJRC_DIR)/usb.c \ | |||||
$(PJRC_DIR)/bootloader_teensy.c | |||||
# Option modules | # Option modules | ||||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | ||||
SRC += usb_mouse.c | |||||
SRC += $(PJRC_DIR)/usb_mouse.c | |||||
endif | endif | ||||
ifdef EXTRAKEY_ENABLE | ifdef EXTRAKEY_ENABLE | ||||
SRC += usb_extra.c | |||||
SRC += $(PJRC_DIR)/usb_extra.c | |||||
endif | endif | ||||
# Search Path | |||||
VPATH += $(TOP_DIR)/$(PJRC_DIR) |
# | # | ||||
# make extcoff = Convert ELF to AVR Extended COFF. | # make extcoff = Convert ELF to AVR Extended COFF. | ||||
# | # | ||||
# make program = Download the hex file to the device, using avrdude. | |||||
# Please customize the avrdude settings below first! | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | # | ||||
# make debug = Start either simulavr or avarice as specified for debugging, | # make debug = Start either simulavr or avarice as specified for debugging, | ||||
# with avr-gdb or avr-insight as the front end for debugging. | # with avr-gdb or avr-insight as the front end for debugging. | ||||
$(REMOVE) -r .dep | $(REMOVE) -r .dep | ||||
$(REMOVE) -r $(OBJDIR) | $(REMOVE) -r $(OBJDIR) | ||||
show_path: | |||||
@echo VPATH=$(VPATH) | |||||
@echo SRC=$(SRC) | |||||
# Create object files directory | # Create object files directory | ||||
$(shell mkdir $(OBJDIR) 2>/dev/null) | $(shell mkdir $(OBJDIR) 2>/dev/null) | ||||
# Listing of phony targets. | # Listing of phony targets. | ||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ | .PHONY : all begin finish end sizebefore sizeafter gccversion \ | ||||
build elf hex eep lss sym coff extcoff \ | build elf hex eep lss sym coff extcoff \ | ||||
clean clean_list program debug gdb-config | |||||
clean clean_list debug gdb-config show_path \ | |||||
program teensy dfu flip dfu-ee flip-ee |