tmk
пре 13 година
9 измењених фајлова са 23 додато и 9 уклоњено
+ 1
- 1
adb.c
Прегледај датотеку
| @@ -280,7 +280,6 @@ Pinouts | |||
| 4: GND | |||
| Commands | |||
| -------- | |||
| ADB command is 1byte and consists of 4bit-address, 2bit-command | |||
| @@ -381,6 +380,7 @@ Keyboard Data(Register0) | |||
| You can read the state from PSW line(active low) however | |||
| the switch has a special scancode 0x7F7F, so you can | |||
| also read from Data line. It uses 0xFFFF for release scancode. | |||
| Release code seems to delay about some 100ms. Due to Mac soft power? | |||
| Keyboard LEDs & state of keys(Register2) | |||
| This register hold current state of three LEDs and nine keys. | |||
+ 1
- 1
adb_usb/Makefile
Прегледај датотеку
| @@ -44,7 +44,7 @@ USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System c | |||
| #---------------- Programming Options -------------------------- | |||
| PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex | |||
| PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
+ 2
- 2
adb_usb/config.h
Прегледај датотеку
| @@ -17,8 +17,8 @@ | |||
| /* key combination for command */ | |||
| #define IS_COMMAND() ( \ | |||
| keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \ | |||
| keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \ | |||
| keyboard_report->mods == (BIT_LSHIFT | BIT_LCTRL | BIT_LALT | BIT_LGUI) || \ | |||
| keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) \ | |||
| ) | |||
+ 1
- 1
adb_usb/matrix.c
Прегледај датотеку
| @@ -87,7 +87,7 @@ uint8_t matrix_scan(void) | |||
| _register_key(key1); | |||
| } | |||
| if (debug_matrix && matrix_is_modified()) { | |||
| if (debug_enable) { | |||
| print("adb_host_kbd_recv: "); phex16(codes); print("\n"); | |||
| } | |||
| return 1; | |||
+ 4
- 1
command.c
Прегледај датотеку
| @@ -102,7 +102,10 @@ uint8_t command_proc(void) | |||
| print("UDCON: "); phex(UDCON); print("\n"); | |||
| print("UDIEN: "); phex(UDIEN); print("\n"); | |||
| print("UDINT: "); phex(UDINT); print("\n"); | |||
| print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n"); | |||
| print("usb_keyboard_leds:"); phex(usb_keyboard_leds); print("\n"); | |||
| print("usb_keyboard_protocol: "); phex(usb_keyboard_protocol); print("\n"); | |||
| print("usb_keyboard_idle_config:"); phex(usb_keyboard_idle_config); print("\n"); | |||
| print("usb_keyboard_idle_count:"); phex(usb_keyboard_idle_count); print("\n"); | |||
| #endif | |||
| break; | |||
| #ifdef USB_NKRO_ENABLE | |||
+ 4
- 0
pjrc/host.c
Прегледај датотеку
| @@ -1,4 +1,5 @@ | |||
| #include <stdint.h> | |||
| #include <avr/interrupt.h> | |||
| #include "usb_keycodes.h" | |||
| #include "usb_keyboard.h" | |||
| #include "usb_mouse.h" | |||
| @@ -58,9 +59,12 @@ void host_add_code(uint8_t code) | |||
| void host_swap_keyboard_report(void) | |||
| { | |||
| uint8_t sreg = SREG; | |||
| cli(); | |||
| report_keyboard_t *tmp = keyboard_report_prev; | |||
| keyboard_report_prev = keyboard_report; | |||
| keyboard_report = tmp; | |||
| SREG = sreg; | |||
| } | |||
| void host_clear_keyboard_report(void) | |||
+ 4
- 3
pjrc/usb.c
Прегледај датотеку
| @@ -687,10 +687,11 @@ ISR(USB_GEN_vect) | |||
| usb_keyboard_idle_count++; | |||
| if (usb_keyboard_idle_count == usb_keyboard_idle_config) { | |||
| usb_keyboard_idle_count = 0; | |||
| UEDATX = keyboard_report->mods; | |||
| UEDATX = keyboard_report_prev->mods; | |||
| UEDATX = 0; | |||
| for (i=0; i<6; i++) { | |||
| UEDATX = keyboard_report->keys[i]; | |||
| uint8_t keys = usb_keyboard_protocol ? KBD_REPORT_KEYS : 6; | |||
| for (i=0; i<keys; i++) { | |||
| UEDATX = keyboard_report_prev->keys[i]; | |||
| } | |||
| UEINTX = 0x3A; | |||
| } | |||
+ 1
- 0
pjrc/usb_keyboard.c
Прегледај датотеку
| @@ -15,6 +15,7 @@ uint8_t usb_keyboard_protocol=1; | |||
| // the idle configuration, how often we send the report to the | |||
| // host (ms * 4) even when it hasn't changed | |||
| // Windows and Linux set 0 while OS X sets 6(24ms) by SET_IDLE request. | |||
| uint8_t usb_keyboard_idle_config=125; | |||
| // count until idle timeout | |||
+ 5
- 0
vusb/host.c
Прегледај датотеку
| @@ -1,3 +1,5 @@ | |||
| #include <stdint.h> | |||
| #include <avr/interrupt.h> | |||
| #include "usbdrv.h" | |||
| #include "usbconfig.h" | |||
| #include "print.h" | |||
| @@ -63,9 +65,12 @@ void host_add_code(uint8_t code) | |||
| void host_swap_keyboard_report(void) | |||
| { | |||
| uint8_t sreg = SREG; | |||
| cli(); | |||
| report_keyboard_t *tmp = keyboard_report_prev; | |||
| keyboard_report_prev = keyboard_report; | |||
| keyboard_report = tmp; | |||
| SREG = sreg; | |||
| } | |||
| void host_clear_keyboard_report(void) | |||
Loading…