From e3169ccc4550490fa12d0960dbac11cf91f5a1d2 Mon Sep 17 00:00:00 2001 From: Jun Wako Date: Wed, 18 Mar 2015 15:56:07 +0900 Subject: [PATCH] m0110: Add support for international keyboard --- converter/m0110_usb/Makefile | 8 +- converter/m0110_usb/Makefile.teensy | 98 ++++++++++++ converter/m0110_usb/README.md | 21 ++- converter/m0110_usb/keymap.c | 223 --------------------------- converter/m0110_usb/keymap_common.h | 36 +++++ converter/m0110_usb/keymap_default.c | 85 ++++++++++ converter/m0110_usb/keymap_intl.c | 85 ++++++++++ converter/m0110_usb/keymap_plain.c | 2 +- converter/m0110_usb/led.c | 10 +- protocol/m0110.c | 21 ++- 10 files changed, 345 insertions(+), 244 deletions(-) create mode 100644 converter/m0110_usb/Makefile.teensy delete mode 100644 converter/m0110_usb/keymap.c create mode 100644 converter/m0110_usb/keymap_default.c create mode 100644 converter/m0110_usb/keymap_intl.c diff --git a/converter/m0110_usb/Makefile b/converter/m0110_usb/Makefile index ac54945e..5f3bb98e 100644 --- a/converter/m0110_usb/Makefile +++ b/converter/m0110_usb/Makefile @@ -17,7 +17,7 @@ SRC = matrix.c \ ifdef KEYMAP SRC += keymap_$(KEYMAP).c else - SRC += keymap_plain.c + SRC += keymap_default.c endif CONFIG_H = config.h @@ -25,10 +25,8 @@ CONFIG_H = config.h # MCU name, you MUST set this to match the board you are using # type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 +MCU = atmega32u2 # TMK converter rev2 +MCU = atmega32u4 # TMK converter rev1 # Processor frequency. diff --git a/converter/m0110_usb/Makefile.teensy b/converter/m0110_usb/Makefile.teensy new file mode 100644 index 00000000..9a5c4106 --- /dev/null +++ b/converter/m0110_usb/Makefile.teensy @@ -0,0 +1,98 @@ +# Target file name (without extension). +TARGET = m0110_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = matrix.c \ + led.c \ + keymap_common.c \ + m0110.c + +# To use own keymap file run make like: make keymap=hasu +ifdef KEYMAP + SRC += keymap_$(KEYMAP).c +else + SRC += keymap_default.c +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md index 7de36d5d..22a8eb04 100644 --- a/converter/m0110_usb/README.md +++ b/converter/m0110_usb/README.md @@ -1,6 +1,6 @@ M0110/M0110A to USB keyboard converter ====================================== -This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. +This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. Read README of top directory too. @@ -20,12 +20,13 @@ Update - 2013/08: Change port for signals `PF` to `PD` - 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. - 2014/06: Change keymaps +- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c) Building Hardware ----------------- -You need **4P4C** cable and **ATMega32U4** board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. +You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. [![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg) @@ -38,6 +39,7 @@ Close-up picture of handset cable. You can see one end of plug has reverse color [![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1) [Teensy]: http://www.pjrc.com/teensy/ +[TMK converter]: https://github.com/tmk/keyboard_converter ### Socket Pinout @@ -53,17 +55,14 @@ You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular wh Building Firmware ----------------- -To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. +To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap. $ git clone git://github.com/tmk/tmk_keyboard.git (or download source) $ cd m0110_usb - $ make clean - $ make + $ make -f Makefile clean + $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}] -To select keymap use `KEYMAP` option. - - $ make clean - $ make KEYMAP={plain|spacefn|hasu} +Use `Makefile.teensy` instead for Teensy. @@ -71,8 +70,8 @@ Keymap ------ To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this. - $ make clean - $ make KEYMAP=name + $ make -f Makefile clean + $ make -f Makefile KEYMAP=name diff --git a/converter/m0110_usb/keymap.c b/converter/m0110_usb/keymap.c deleted file mode 100644 index 4570dd28..00000000 --- a/converter/m0110_usb/keymap.c +++ /dev/null @@ -1,223 +0,0 @@ -/* -Copyright 2011,2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -/* M0110A Support was contributed by skagon@github */ - -#include -#include -#include -#include "keycode.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "keymap.h" - - -/* - * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset - * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist - * on the M0110A, but since it generates a unique scan code which is not used for some other key in - * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost) - * identical to the combination of the M0110 along with the M0120 keypad. The only difference - * (which is causing some problems as you will read below) is that the M0110+M0120 don't have - * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which - * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has - * substituted the [comma] key with the [=] key, however its scancode is the same. - * - * Physical layout: - * M0110A - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------' |-----------|Ent| - * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - * - * M0110 M0120 - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -| +| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| - * |---------------------------------------------------------| |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| ,| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | - * `---------------------------------------------------------' |-----------|Ent| - * |Opt|Mac | Space |Ent |Opt| | 0| .| | - * `-----------------------------------------------' `---------------' - * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down) - * - * NOTE: \ is located differently. - * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A). - * NOTE: Left Shift and right Shift are logically same key. - * NOTE: Left Option and right Option are logically same key. - */ - -/* Keymap definition Macro - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - * NOTE: Ent between Space and \ means Enter on M0110. - */ -#define KEYMAP( \ - K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ - K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \ - K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \ - K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ - { KC_##K08, KC_##K09, KC_NO, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ - { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ - { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \ - { KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \ - { KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ - { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ - { KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \ - { KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ -} - -#ifdef KEYMAP_SECTION_ENABLE -const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { -#else -static const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { -#endif - /* Default: - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Ctl |Gui | Space |Alt| \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - */ - [0] = KEYMAP( - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, CLR, EQL, PSLS,PAST, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, - LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, FN15, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, - LCTL,LGUI, FN16, LALT,FN31,LEFT,RGHT,DOWN, P0, PDOT - ), - /* Cursor Layer(WASD, IJKL) - * ,---------------------------------------------------------. ,---------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Ctl |Gui | Space |Alt | \|Hom|End|PgD| | 0| .| | - * `---------------------------------------------------------' `---------------' - */ - [3] = KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, - LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS, - LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, - LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT - ), - [4] = KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, - LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS, - LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, - LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT - ), - [7] = {}, -}; - - -/* - * Fn action definition - */ -#ifdef KEYMAP_SECTION_ENABLE -const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { -#else -static const uint16_t fn_actions[] PROGMEM = { -#endif - [0] = ACTION_LAYER_MOMENTARY(1), - [1] = ACTION_LAYER_MOMENTARY(2), - [2] = ACTION_LAYER_MOMENTARY(3), - [3] = ACTION_LAYER_MOMENTARY(4), - [4] = ACTION_LAYER_MOMENTARY(5), - [5] = ACTION_LAYER_MOMENTARY(6), - [6] = ACTION_LAYER_MOMENTARY(7), - [7] = ACTION_LAYER_TOGGLE(1), - [8] = ACTION_LAYER_TOGGLE(2), - [9] = ACTION_LAYER_TOGGLE(3), - [10] = ACTION_LAYER_TAP_TOGGLE(1), - [11] = ACTION_LAYER_TAP_TOGGLE(2), - [12] = ACTION_LAYER_TAP_TOGGLE(3), - [13] = ACTION_LAYER_TAP_KEY(1, KC_F), - [14] = ACTION_LAYER_TAP_KEY(2, KC_J), - [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER), - [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE), - [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON), - [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE), - [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH), - [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE), - [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE), - [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE), - [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER), - [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC), - [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE), - [26] = ACTION_MODS_ONESHOT(MOD_LCTL), - [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC), - [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE), - [29] = ACTION_MODS_ONESHOT(MOD_LSFT), - [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE), - [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH), -}; - - - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); -} - -/* translates Fn index to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - action_t action; - action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); - return action; -} diff --git a/converter/m0110_usb/keymap_common.h b/converter/m0110_usb/keymap_common.h index e1d47342..8bde7473 100644 --- a/converter/m0110_usb/keymap_common.h +++ b/converter/m0110_usb/keymap_common.h @@ -105,3 +105,39 @@ extern const uint16_t fn_actions[]; { KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \ { KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ } + +/* International keyboard + * ,---------------------------------------------------------. + * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| + * |---------------------------------------------------------| + * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| + * |------------------------------------------------------, | + * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | + * |---------------------------------------------------------| + * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| + * `---------------------------------------------------------' + * | 3A| 37| 34 | 31| 3A| + * `------------------------------------------------' + */ +#define KEYMAP_INTL( \ + K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ + K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K59,K5B,K5C,K4E, \ + K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24, K56,K57,K58,K66, \ + K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K4D, K53,K54,K55,K4C, \ + K3A,K37, K34, K31, K46,K42,K48, K52, K41 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ + { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \ + { KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \ + { KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ + { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ + { KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \ + { KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ +} diff --git a/converter/m0110_usb/keymap_default.c b/converter/m0110_usb/keymap_default.c new file mode 100644 index 00000000..b0b8ee22 --- /dev/null +++ b/converter/m0110_usb/keymap_default.c @@ -0,0 +1,85 @@ +/* +Copyright 2011,2012,2015 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include +#include "keycode.h" +#include "keymap_common.h" + + + +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + /* Default: + * M0110 M0120 + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + * M0110A + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [0] = KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), + /* Cursor Layer + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |INS| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + */ + [1] = KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, P7, P8, P9, PMNS, + LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, INS, HOME,END, PGDN, P0, PDOT + ), +}; + + +/* + * Fn action definition + */ +const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; diff --git a/converter/m0110_usb/keymap_intl.c b/converter/m0110_usb/keymap_intl.c new file mode 100644 index 00000000..ceb1f18d --- /dev/null +++ b/converter/m0110_usb/keymap_intl.c @@ -0,0 +1,85 @@ +/* +Copyright 2015 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include +#include "keycode.h" +#include "keymap_common.h" + + + +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + /* International keyboard + * M0110 M0120 + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| /| + * |------------------------------------------------------, | |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shif| | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + * M0110A(not existent?) + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| -| + * |------------------------------------------------------, | |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [0] = KEYMAP_INTL( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, P4, P5, P6, PPLS, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, LEFT,RGHT,DOWN, P0, PDOT + ), + /* Cursor Layer + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |INS| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shif| <|End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + */ + [1] = KEYMAP_INTL( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, ENT, P7, P8, P9, PMNS, + LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,INS, P4, P5, P6, PPLS, + LSFT,NO, END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, HOME,END, PGDN, P0, PDOT + ), +}; + + +/* + * Fn action definition + */ +const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; diff --git a/converter/m0110_usb/keymap_plain.c b/converter/m0110_usb/keymap_plain.c index f262dca2..d1507fca 100644 --- a/converter/m0110_usb/keymap_plain.c +++ b/converter/m0110_usb/keymap_plain.c @@ -27,7 +27,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |---------------------------------------------------------| |---------------| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| * |---------------------------------------------------------| |---------------| - * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| * |---------------------------------------------------------| |---------------| * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | * `---------------------------------------------------------' |-----------|Ent| diff --git a/converter/m0110_usb/led.c b/converter/m0110_usb/led.c index f76545f0..3822a131 100644 --- a/converter/m0110_usb/led.c +++ b/converter/m0110_usb/led.c @@ -15,10 +15,18 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "stdint.h" +#include +#include #include "led.h" void led_set(uint8_t usb_led) { + if (usb_led & (1<>1)) M0110 M0120 ,---------------------------------------------------------. ,---------------. @@ -529,6 +531,19 @@ Scan Code | 3A| 37| 31 | 34| 3A| | 52| 41| | `------------------------------------------------' `---------------' + International keyboard(See page 22 of "Technical Info for 128K/512K") + ,---------------------------------------------------------. + | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| + |---------------------------------------------------------| + | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| + |------------------------------------------------------ | + | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | + |---------------------------------------------------------| + | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| + `---------------------------------------------------------' + | 3A| 37| 34 | 31| 3A| + `------------------------------------------------' + M0110A ,---------------------------------------------------------. ,---------------. | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *| @@ -568,7 +583,7 @@ Connector: Signaling: http://www.kbdbabel.org/signaling/kbd_signaling_mac.png http://typematic.blog.shinobi.jp/Entry/14/ -Scan Codes: +M0110 raw scan codes: Page 22 of Tech Info for 128K/512K Page 07 of Tech Info for Plus http://m0115.web.fc2.com/m0110.jpg