From f108623011a17c04de202fb13dccdda72893655f Mon Sep 17 00:00:00 2001
From: flabbergast <s3+flabbergast@sdfeu.org>
Date: Thu, 3 Dec 2015 08:49:55 +0000
Subject: [PATCH] Add maple mini code.

---
 keyboard/stm32_f103_onekey/Makefile  |  15 ++-
 keyboard/stm32_f103_onekey/chconf.h  |   8 +-
 keyboard/stm32_f103_onekey/led.c     |  16 ++-
 keyboard/stm32_f103_onekey/matrix.c  |  14 +++
 keyboard/stm32_f103_onekey/mcuconf.h | 145 +++++++++++++++++----------
 tmk_core/protocol/chibios/usb_main.c |   4 +-
 6 files changed, 133 insertions(+), 69 deletions(-)

diff --git a/keyboard/stm32_f103_onekey/Makefile b/keyboard/stm32_f103_onekey/Makefile
index ea2ee08b..89e58144 100644
--- a/keyboard/stm32_f103_onekey/Makefile
+++ b/keyboard/stm32_f103_onekey/Makefile
@@ -1,6 +1,5 @@
 # Target file name (without extension).
 PROJECT = ch
-TARGET = alps64
 
 # Directory common source files exist
 TMK_DIR = ../../tmk_core
@@ -26,14 +25,14 @@ CONFIG_H = config.h
 # BOARD = GENERIC_STM32_F103
 
 # GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
-OPT_DEFS =
-MCU_LDSCRIPT = STM32F103x8
-BOARD = GENERIC_STM32_F103
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
 
 # MAPLE MINI
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
-# MCU_LDSCRIPT = STM32F103xE_maplemini_bootloader.ld
-# BOARD = MAPLEMINI_STM32_F103
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
+MCU_LDSCRIPT = STM32F103xE_maplemini_bootloader
+BOARD = MAPLEMINI_STM32_F103
 
 ## chip/board settings
 # the next two should match the directories in
@@ -71,7 +70,7 @@ ARMV = 7
 ## BOOTMAGIC is not supported on STM32 chips yet.
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
+# CONSOLE_ENABLE = yes	# Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	    # USB Nkey Rollover
diff --git a/keyboard/stm32_f103_onekey/chconf.h b/keyboard/stm32_f103_onekey/chconf.h
index 689d4b39..acce6a1f 100644
--- a/keyboard/stm32_f103_onekey/chconf.h
+++ b/keyboard/stm32_f103_onekey/chconf.h
@@ -46,7 +46,7 @@
  * @details Frequency of the system timer that drives the system ticks. This
  *          setting also defines the system tick time unit.
  */
-#define CH_CFG_ST_FREQUENCY                 10000
+#define CH_CFG_ST_FREQUENCY                 2000
 
 /**
  * @brief   Time delta constant for the tick-less mode.
@@ -124,7 +124,7 @@
  * @note    This is not related to the compiler optimization options.
  * @note    The default is @p TRUE.
  */
-#define CH_CFG_OPTIMIZE_SPEED               FALSE
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
 
 /** @} */
 
@@ -281,7 +281,7 @@
  *
  * @note    The default is @p TRUE.
  */
-#define CH_CFG_USE_MEMCORE                  FALSE
+#define CH_CFG_USE_MEMCORE                  TRUE
 
 /**
  * @brief   Heap Allocator APIs.
@@ -293,7 +293,7 @@
  *          @p CH_CFG_USE_SEMAPHORES.
  * @note    Mutexes are recommended.
  */
-#define CH_CFG_USE_HEAP                     FALSE
+#define CH_CFG_USE_HEAP                     TRUE
 
 /**
  * @brief   Memory Pools Allocator APIs.
diff --git a/keyboard/stm32_f103_onekey/led.c b/keyboard/stm32_f103_onekey/led.c
index ddacfd8c..3c86963c 100644
--- a/keyboard/stm32_f103_onekey/led.c
+++ b/keyboard/stm32_f103_onekey/led.c
@@ -22,11 +22,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 void led_set(uint8_t usb_led)
 {
     if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output high
+    	/* generic STM32F103C8T6 board */
+#ifdef BOARD_GENERIC_STM32_F103
         palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_PUSHPULL);
         palClearPad(GPIOC, 13);
+#endif
+        /* Maple Mini */
+#ifdef BOARD_MAPLEMINI_STM32_F103
+        palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
+        palSetPad(GPIOB, 1);
+#endif
     } else {
         // Hi-Z
+    	/* generic STM32F103C8T6 board */
+#ifdef BOARD_GENERIC_STM32_F103
         palSetPadMode(GPIOC, 13, PAL_MODE_INPUT);
+#endif
+        /* Maple Mini */
+#ifdef BOARD_MAPLEMINI_STM32_F103
+        palSetPadMode(GPIOB, 1, PAL_MODE_INPUT);
+#endif
     }
 }
diff --git a/keyboard/stm32_f103_onekey/matrix.c b/keyboard/stm32_f103_onekey/matrix.c
index 30151c42..d7a9cc3a 100644
--- a/keyboard/stm32_f103_onekey/matrix.c
+++ b/keyboard/stm32_f103_onekey/matrix.c
@@ -54,9 +54,19 @@ uint8_t matrix_cols(void)
     return MATRIX_COLS;
 }
 
+/* generic STM32F103C8T6 board */
+#ifdef BOARD_GENERIC_STM32_F103
 #define LED_ON()    do { palClearPad(GPIOC, GPIOC_LED) ;} while (0)
 #define LED_OFF()   do { palSetPad(GPIOC, GPIOC_LED); } while (0)
 #define LED_TGL()   do { palTogglePad(GPIOC, GPIOC_LED); } while (0)
+#endif
+
+/* Maple Mini */
+#ifdef BOARD_MAPLEMINI_STM32_F103
+#define LED_ON()    do { palClearPad(GPIOB, 1) ;} while (0)
+#define LED_OFF()   do { palSetPad(GPIOB, 1); } while (0)
+#define LED_TGL()   do { palTogglePad(GPIOB, 1); } while (0)
+#endif
 
 void matrix_init(void)
 {
@@ -132,8 +142,12 @@ void matrix_print(void)
  */
 static void  init_cols(void)
 {
+#ifdef BOARD_MAPLEMINI_STM32_F103
     // don't need pullup/down, since it's pulled down in hardware
+    palSetPadMode(GPIOB, 8, PAL_MODE_INPUT);
+#else
     palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN);
+#endif
 }
 
 /* Returns status of switches(1:on, 0:off) */
diff --git a/keyboard/stm32_f103_onekey/mcuconf.h b/keyboard/stm32_f103_onekey/mcuconf.h
index 4d29c4ae..626332a6 100644
--- a/keyboard/stm32_f103_onekey/mcuconf.h
+++ b/keyboard/stm32_f103_onekey/mcuconf.h
@@ -17,68 +17,72 @@
 #ifndef _MCUCONF_H_
 #define _MCUCONF_H_
 
+#define STM32F103_MCUCONF
+
 /*
- * STM32F0xx drivers configuration.
+ * STM32F103 drivers configuration.
  * The following settings override the default settings present in
  * the various device driver implementation headers.
  * Note that the settings for each driver only have effect if the whole
  * driver is enabled in halconf.h.
  *
  * IRQ priorities:
- * 3...0       Lowest...Highest.
+ * 15...0       Lowest...Highest.
  *
  * DMA priorities:
  * 0...3        Lowest...Highest.
  */
 
-#define STM32F103_MCUCONF
-
 /*
  * HAL driver system settings.
  */
 #define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
 #define STM32_HSI_ENABLED                   TRUE
-#define STM32_HSI14_ENABLED                 TRUE
-#define STM32_HSI48_ENABLED                 FALSE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
 #define STM32_LSE_ENABLED                   FALSE
 #define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSI
-#define STM32_PREDIV_VALUE                  2
-#define STM32_PLLMUL_VALUE                  12
-#define STM32_USBPRE			    STM32_USBPRE_DIV1
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
 #define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE                          STM32_PPRE_DIV1
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
 #define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
 #define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
-#define STM32_USBSW                         STM32_USBSW_HSI48
-#define STM32_CECSW                         STM32_CECSW_HSI
-#define STM32_I2C1SW                        STM32_I2C1SW_HSI
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
 
 /*
  * ADC driver system settings.
  */
 #define STM32_ADC_USE_ADC1                  FALSE
 #define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
 
 /*
  * EXT driver system settings.
  */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
 
 /*
  * GPT driver system settings.
@@ -86,11 +90,15 @@
 #define STM32_GPT_USE_TIM1                  FALSE
 #define STM32_GPT_USE_TIM2                  FALSE
 #define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM14                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         2
-#define STM32_GPT_TIM2_IRQ_PRIORITY         2
-#define STM32_GPT_TIM3_IRQ_PRIORITY         2
-#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
 
 /*
  * I2C driver system settings.
@@ -98,11 +106,10 @@
 #define STM32_I2C_USE_I2C1                  FALSE
 #define STM32_I2C_USE_I2C2                  FALSE
 #define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         3
-#define STM32_I2C_I2C2_IRQ_PRIORITY         3
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
 #define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
 
 /*
@@ -111,9 +118,15 @@
 #define STM32_ICU_USE_TIM1                  FALSE
 #define STM32_ICU_USE_TIM2                  FALSE
 #define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         3
-#define STM32_ICU_TIM2_IRQ_PRIORITY         3
-#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
 
 /*
  * PWM driver system settings.
@@ -122,33 +135,53 @@
 #define STM32_PWM_USE_TIM1                  FALSE
 #define STM32_PWM_USE_TIM2                  FALSE
 #define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         3
-#define STM32_PWM_TIM2_IRQ_PRIORITY         3
-#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
 
 /*
  * SERIAL driver system settings.
  */
 #define STM32_SERIAL_USE_USART1             FALSE
 #define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        3
-#define STM32_SERIAL_USART2_PRIORITY        3
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
 
 /*
  * SPI driver system settings.
  */
 #define STM32_SPI_USE_SPI1                  FALSE
 #define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
 #define STM32_SPI_SPI1_DMA_PRIORITY         1
 #define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         2
-#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
 #define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
 
 /*
  * ST driver system settings.
  */
-#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_IRQ_PRIORITY               8
 #define STM32_ST_USE_TIMER                  2
 
 /*
@@ -156,10 +189,13 @@
  */
 #define STM32_UART_USE_USART1               FALSE
 #define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      3
-#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
 #define STM32_UART_USART1_DMA_PRIORITY      0
 #define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
 #define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
 
 /*
@@ -167,6 +203,7 @@
  */
 #define STM32_USB_USE_USB1                  TRUE
 #define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
 
 #endif /* _MCUCONF_H_ */
diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c
index 1ce5b4ae..85548fbb 100644
--- a/tmk_core/protocol/chibios/usb_main.c
+++ b/tmk_core/protocol/chibios/usb_main.c
@@ -1036,11 +1036,11 @@ void send_remote_wakeup(USBDriver *usbp) {
   chThdSleepMilliseconds(15);
   USB0->CTL &= ~USBx_CTL_RESUME;
 #endif /* KINETIS_USB_USE_USB0 */
-#elif defined(STM32F0XX) /* K20x || KL2x */
+#elif defined(STM32F0XX) || defined(STM32F1XX) /* K20x || KL2x */
   STM32_USB->CNTR |= CNTR_RESUME;
   chThdSleepMilliseconds(15);
   STM32_USB->CNTR &= ~CNTR_RESUME;
-#else /* STM32F0XX */
+#else /* STM32F0XX || STM32F1XX */
 #warning Sending remote wakeup packet not implemented for your platform.
 #endif /* K20x || KL2x */
 }