1
0

Merge pull request #355 from papodaca/XT

Add converter for XT keyboards, fixes #309
This commit is contained in:
tmk 2016-06-05 00:14:42 +09:00
commit f37805e698
18 changed files with 1141 additions and 59 deletions

1
.gitignore vendored
View File

@ -11,3 +11,4 @@ tags
*~ *~
build/ build/
*.bak *.bak
.DS_Store

103
converter/xt_usb/Makefile Normal file
View File

@ -0,0 +1,103 @@
#
# Makefile for Teensy
#
# Target file name (without extension).
TARGET = xt_usb_lufa
# Directory common source filess exist
TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
# project specific files
SRC = keymap_common.c \
matrix.c \
led.c
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := keymap_plain.c $(SRC)
endif
CONFIG_H = config.h
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# XT/2 Options
#
XT_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)
include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

View File

@ -0,0 +1,36 @@
XT to USB keyboard converter
==============================
This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)
Connect Wires
-------------
In case of Teensy2.0(ATMega32U4):
1. Connect **Vcc** and **GND**.
2. Connect **Clock** and **Data** line.
- **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
To change pin configuration edit **config.h** and **Makefile**.
Build Firmware
--------------
For **PJRC Teensy** just run `make`:
$ make clean
$ make
To select keymap:
$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]
After that you will find HEX file `xt_usb_lufa.hex` in current directory.
Keymap
------
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in README.md of top directory) and existent keymap files.

71
converter/xt_usb/config.h Normal file
View File

@ -0,0 +1,71 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include <avr/interrupt.h>
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6512
#define DEVICE_VER 0x0001
#define MANUFACTURER t.m.k.
#define PRODUCT XT keyboard converter
#define DESCRIPTION convert XT keyboard to USB
/* matrix size */
#define MATRIX_ROWS 16 // keycode bit: 3-0
#define MATRIX_COLS 8 // keycode bit: 6-4
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
)
//#define NO_SUSPEND_POWER_DOWN
/*
* XT Pin interrupt
*/
#ifdef XT_USE_INT
/* uses INT1 for clock line(ATMega32U4) */
#define XT_CLOCK_PORT PORTD
#define XT_CLOCK_PIN PIND
#define XT_CLOCK_DDR DDRD
#define XT_CLOCK_BIT 1
#define XT_DATA_PORT PORTD
#define XT_DATA_PIN PIND
#define XT_DATA_DDR DDRD
#define XT_DATA_BIT 0
#define XT_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \
(1<<ISC10)); \
} while (0)
#define XT_INT_ON() do { \
EIMSK |= (1<<INT1); \
} while (0)
#define XT_INT_OFF() do { \
EIMSK &= ~(1<<INT1); \
} while (0)
#define XT_INT_VECT INT1_vect
#endif
#endif

View File

@ -0,0 +1,31 @@
/*
Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "keymap_common.h"
#include "progmem.h"
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
}
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint8_t keycode)
{
return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
}

View File

@ -0,0 +1,144 @@
/*
Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#include <stdint.h>
#include <stdbool.h>
#include "keycode.h"
#include "action.h"
#include "action_macro.h"
#include "report.h"
#include "print.h"
#include "debug.h"
#include "keymap.h"
// 32*8(256) byte array which converts PS/2 code into USB code
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
/* All keys */
#define KEYMAP_ALL( \
K00, K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D, K0E,K0F,K0G, \
K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B,K1C,K1D, K1E,K1F,K1G, K1H,K1I,K1J,K1K, \
K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K2A,K2B,K2C,K2D, K2E,K2F,K2G, K2H,K2I,K2J, \
K30,K31,K32,K33,K34,K35,K36,K37,K38,K39,K3A,K3B, K3D, K3H,K3I,K3J,K3K, \
K40,K41,K42,K43,K44,K45,K46,K47,K48,K49,K4A, K4D, K4F, K4H,K4I,K4J, \
K50,K51,K52, K55, K5A,K5B,K5C,K5D, K5E,K5F,K5G, K5H, K5J,K5K, \
\
K60, K61, K62, /* System Power, Sleep, Wake */ \
K70, K71, K72, /* Mute, Volume Up, Volume Down */ \
K80, K81, K82, K83, K84, /* Next, Previous, Stop, Pause, Media Select */ \
K90, K91, K92, /* Mail, Calculator, My Computer */ \
KA0, KA1, KA2, KA3, /* WWW Search, Home, Back, Forward */ \
KB0, KB1, KB2 /* WWW Stop, Refresh, Favorites */ \
) { \
{ KC_NO, KC_##K00, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16 }, \
{ KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K20 }, \
{ KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28 }, \
{ KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K3D, KC_##K50, KC_##K31, KC_##K32 }, \
{ KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A }, \
{ KC_##K3B, KC_##K10, KC_##K40, KC_##K2D, KC_##K41, KC_##K42, KC_##K43, KC_##K44 }, \
{ KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4D, KC_##K1J }, \
{ KC_##K52, KC_##K55, KC_##K30, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06 }, \
{ KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K1H, KC_##K0F, KC_##K2H }, \
{ KC_##K2I, KC_##K2J, KC_##K1K, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K4H }, \
{ KC_##K4I, KC_##K4J, KC_##K5H, KC_##K5J, KC_##K5K, KC_##K5D, KC_##K1I, KC_##K0C }, \
{ KC_##K0D, KC_##K5A, KC_##K80, KC_##K51, KC_##K5B, KC_##K5C, KC_##K60, KC_##K61 }, \
{ KC_##K70, KC_##K91, KC_##K83, KC_##K62, KC_##K82, KC_##KA0, KC_##KB2, KC_##KB1 }, \
{ KC_##KB0, KC_##KA3, KC_##KA2, KC_##K92, KC_##K90, KC_##K84, KC_##K81, KC_##K1F }, \
{ KC_##K4F, KC_##K1G, KC_##K72, KC_##K5E, KC_##K71, KC_##K5G, KC_##KA1, KC_##K2F }, \
{ KC_##K5F, KC_##K2G, KC_##K1E, KC_##K2E, KC_##K0E, KC_##K0G, KC_NO , KC_NO } \
}
/* US layout */
#define KEYMAP( \
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
) \
KEYMAP_ALL( \
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
\
SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
MAIL, CALCULATOR, MY_COMPUTER, \
WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
)
/* ISO layout */
#define KEYMAP_ISO( \
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A, K6B,K73,K74,K79, \
K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
) \
KEYMAP_ALL( \
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
\
SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
MAIL, CALCULATOR, MY_COMPUTER, \
WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
)
/* JIS layout */
#define KEYMAP_JIS( \
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \
K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
) \
KEYMAP_ALL( \
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
\
SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
MAIL, CALCULATOR, MY_COMPUTER, \
WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
)
#endif

View File

@ -0,0 +1,34 @@
/*
* JIS layout Japanese keyboard
*/
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: JIS LAYOUT
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
* `---' `---------------' `---------------' `---------------' `-----------' `-----------'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| JY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -|
* |-----------------------------------------------------------| |-----------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret | |Del|End|PgD| | 7| 8| 9| |
* |------------------------------------------------------` | `-----------' |-----------| +|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| :| \| | | 4| 5| 6| |
* |-----------------------------------------------------------| ,---. |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3| |
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
* |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
* `-----------------------------------------------------------' `-----------' `---------------'
*/
KEYMAP_JIS(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, DEL, END, PGDN, P7, P8, P9,
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, RSFT, UP, P1, P2, P3,
LCTL,LGUI,LALT, MHEN,SPC, HENK,KANA, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
),
};
const uint16_t PROGMEM fn_actions[] = {
};

View File

@ -0,0 +1,32 @@
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: default
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
* `---' `---------------' `---------------' `---------------' `-----------' `-----------'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
* |-----------------------------------------------------------| |-----------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
* |-----------------------------------------------------------| `-----------' |-----------| +|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
* |-----------------------------------------------------------| ,---. |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
* |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
* `-----------------------------------------------------------' `-----------' `---------------'
*/
KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
),
};
const uint16_t PROGMEM fn_actions[] = {
};

View File

@ -0,0 +1,61 @@
/*
* SpaceFN layout
* http://geekhack.org/index.php?topic=51069.0
*/
#include "keymap_common.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: default
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
* `---' `---------------' `---------------' `---------------' `-----------' `-----------'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
* |-----------------------------------------------------------| |-----------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
* |-----------------------------------------------------------| `-----------' |-----------| +|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
* |-----------------------------------------------------------| ,---. |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
* |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
* `-----------------------------------------------------------' `-----------' `---------------'
*/
KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
LCTL,LGUI,LALT, FN0, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
),
/* 1: SpaceFN
* ,-----------------------------------------------------------.
* |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
* |-----------------------------------------------------------|
* | | | |Esc| | | |Hom|Up |End|Psc|Slk|Pau|Ins |
* |-----------------------------------------------------------|
* | | | | | | |PgU|Lef|Dow|Rig| | | |
* |-----------------------------------------------------------|
* | | | | | |Spc|PgD|` |~ | |Men| |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
TRNS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP, END, PSCR,SLCK,PAUS,INS, DEL, END, PGDN, P7, P8, P9,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS, TRNS, P4, P5, P6, PPLS,
TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP, TRNS, UP, P1, P2, P3,
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, LEFT,DOWN,RGHT, P0, PDOT,PENT
),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
[1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // tilde
};

20
converter/xt_usb/led.c Normal file
View File

@ -0,0 +1,20 @@
/*
Copyright 2016 Ethan Apodaca <papodaca@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
void led_set(uint8_t usb_led) {
//XT Keyboards do not have LEDs, nothing to do.
}

333
converter/xt_usb/matrix.c Normal file
View File

@ -0,0 +1,333 @@
/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
Copyright 2016 Ethan Apodaca <papodaca@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "action.h"
#include "print.h"
#include "util.h"
#include "debug.h"
#include "xt.h"
#include "matrix.h"
static void matrix_make(uint8_t code);
static void matrix_break(uint8_t code);
static void matrix_clear(void);
#ifdef MATRIX_HAS_GHOST
static bool matrix_has_ghost_in_row(uint8_t row);
#endif
static uint8_t matrix[MATRIX_ROWS];
#define ROW(code) (code>>3)
#define COL(code) (code&0x07)
// matrix positions for exceptional keys
#define PRINT_SCREEN (0x7C)
#define PAUSE (0x7D)
static bool is_modified = false;
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_enable = true;
xt_host_init();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
return;
}
static uint8_t move_codes(uint8_t code) {
switch(code) {
case 0x10:
code += 0x5E;
break;
case 0x19:
code += 0x41;
break;
case 0x1C:
case 0x1D:
code += 0x38;
break;
case 0x20:
case 0x21:
case 0x22:
case 0x24:
code += 0x40;
break;
case 0x2E:
case 0x30:
case 0x32:
code += 0x44;
break;
case 0x35:
case 0x38:
code += 0x21;
break;
case 0x47:
case 0x48:
case 0x49:
case 0x4B:
case 0x4D:
case 0x4F:
case 0x50:
case 0x51:
case 0x52:
case 0x53:
code += 0x28;
break;
}
return code;
}
uint8_t matrix_scan(void)
{
// scan code reading states
static enum {
INIT,
E0,
E0_2A,
E0_2A_E0,
E0_B7,
E0_B7_E0,
// print screen
E1,
E1_1D,
E1_1D_45,
E1_1D_45_E1,
E1_1D_45_E1_9D,
// pause
} state = INIT;
is_modified = false;
// 'pseudo break code' hack
if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) {
matrix_break(PAUSE);
}
uint8_t code = xt_host_recv();
switch (state) {
case INIT:
switch (code) {
case 0xE0:
state = E0;
break;
case 0xE1:
state = E1;
break;
default: // normal key make
if (code < 0x80 && code != 0x00) {
xprintf("make: %X\r\n", code);
matrix_make(code);
} else if (code > 0x80 && code < 0xFF && code != 0x00) {
xprintf("break %X\r\n", code);
matrix_break(code - 0x80);
}
state = INIT;
}
break;
case E0: // E0-Prefixed
switch (code) { //move these codes to unused places on the matrix
case 0x2A:
state = E0_2A;
break;
case 0xB7:
state = E0_B7;
break;
default:
if (code < 0x80 && code != 0x00) {
matrix_make(move_codes(code));
} else if (code > 0x80 && code < 0xFF && code != 0x00) {
matrix_break(move_codes(code - 0x80));
}
state = INIT;
}
break;
case E0_2A:
if(code == 0xE0)
state = E0_2A_E0;
else
state = INIT;
break;
case E0_2A_E0:
if(code == 0x37)
matrix_make(PRINT_SCREEN);
else
state = INIT;
break;
case E0_B7:
if(code == 0xE0)
state = E0_B7;
else
state = INIT;
break;
case E0_B7_E0:
if(code == 0xAA)
matrix_break(PRINT_SCREEN);
else
state = INIT;
break;
case E1:
if (code == 0x1D)
state = E1_1D;
else
state = INIT;
break;
case E1_1D:
if(code == 0x45)
state = E1_1D_45;
else
state = INIT;
break;
case E1_1D_45:
if(code == 0xE1)
state = E1_1D_45_E1;
else
state = INIT;
break;
case E1_1D_45_E1:
if(code == 0x9D)
state = E1_1D_45_E1_9D;
else
state = INIT;
break;
case E1_1D_45_E1_9D:
if(code == 0xC5)
matrix_make(PAUSE);
else
state = INIT;
break;
default:
state = INIT;
}
return 1;
}
bool matrix_is_modified(void)
{
return is_modified;
}
inline
bool matrix_has_ghost(void)
{
#ifdef MATRIX_HAS_GHOST
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
if (matrix_has_ghost_in_row(i))
return true;
}
#endif
return false;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & (1<<col));
}
inline
uint8_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 01234567\n");
for (uint8_t row = 0; row < matrix_rows(); row++) {
phex(row); print(": ");
pbin_reverse(matrix_get_row(row));
#ifdef MATRIX_HAS_GHOST
if (matrix_has_ghost_in_row(row)) {
print(" <ghost");
}
#endif
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop(matrix[i]);
}
return count;
}
#ifdef MATRIX_HAS_GHOST
inline
static bool matrix_has_ghost_in_row(uint8_t row)
{
// no ghost exists in case less than 2 keys on
if (((matrix[row] - 1) & matrix[row]) == 0)
return false;
// ghost exists in case same state as other row
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
if (i != row && (matrix[i] & matrix[row]) == matrix[row])
return true;
}
return false;
}
#endif
inline
static void matrix_make(uint8_t code)
{
if (!matrix_is_on(ROW(code), COL(code))) {
matrix[ROW(code)] |= 1<<COL(code);
is_modified = true;
}
}
inline
static void matrix_break(uint8_t code)
{
if (matrix_is_on(ROW(code), COL(code))) {
matrix[ROW(code)] &= ~(1<<COL(code));
is_modified = true;
}
}
inline
static void matrix_clear(void)
{
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
}

View File

@ -26,6 +26,13 @@ ifdef PS2_USE_USART
endif endif
ifdef XT_USE_INT
SRC += protocol/xt_interrupt.c
SRC += protocol/xt_io_avr.c
OPT_DEFS += -DXT_USE_INT
endif
ifdef SERIAL_MOUSE_MICROSOFT_ENABLE ifdef SERIAL_MOUSE_MICROSOFT_ENABLE
SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \ OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \

57
tmk_core/protocol/pbuff.h Normal file
View File

@ -0,0 +1,57 @@
/*--------------------------------------------------------------------
* Ring buffer to store scan codes from keyboard
*------------------------------------------------------------------*/
#ifndef PBUFF_H
#define PBUFF_H
#include "print.h"
#define PBUF_SIZE 32
static uint16_t pbuf[PBUF_SIZE];
static uint16_t pbuf_head = 0;
static uint16_t pbuf_tail = 0;
static inline void pbuf_enqueue(uint16_t data)
{
uint8_t sreg = SREG;
cli();
uint16_t next = (pbuf_head + 1) % PBUF_SIZE;
if (next != pbuf_tail) {
pbuf[pbuf_head] = data;
pbuf_head = next;
} else {
print("pbuf: full\n");
}
SREG = sreg;
}
static inline uint16_t pbuf_dequeue(void)
{
uint16_t val = 0;
uint8_t sreg = SREG;
cli();
if (pbuf_head != pbuf_tail) {
val = pbuf[pbuf_tail];
pbuf_tail = (pbuf_tail + 1) % PBUF_SIZE;
}
SREG = sreg;
return val;
}
static inline bool pbuf_has_data(void)
{
uint8_t sreg = SREG;
cli();
bool has_data = (pbuf_head != pbuf_tail);
SREG = sreg;
return has_data;
}
static inline void pbuf_clear(void)
{
uint8_t sreg = SREG;
cli();
pbuf_head = pbuf_tail = 0;
SREG = sreg;
}
#endif

View File

@ -42,6 +42,7 @@ POSSIBILITY OF SUCH DAMAGE.
#include <stdbool.h> #include <stdbool.h>
#include <avr/interrupt.h> #include <avr/interrupt.h>
#include <util/delay.h> #include <util/delay.h>
#include "pbuff.h"
#include "ps2.h" #include "ps2.h"
#include "ps2_io.h" #include "ps2_io.h"
#include "print.h" #include "print.h"
@ -57,13 +58,6 @@ POSSIBILITY OF SUCH DAMAGE.
uint8_t ps2_error = PS2_ERR_NONE; uint8_t ps2_error = PS2_ERR_NONE;
static inline uint8_t pbuf_dequeue(void);
static inline void pbuf_enqueue(uint8_t data);
static inline bool pbuf_has_data(void);
static inline void pbuf_clear(void);
void ps2_host_init(void) void ps2_host_init(void)
{ {
idle(); idle();
@ -225,55 +219,3 @@ void ps2_host_set_led(uint8_t led)
ps2_host_send(0xED); ps2_host_send(0xED);
ps2_host_send(led); ps2_host_send(led);
} }
/*--------------------------------------------------------------------
* Ring buffer to store scan codes from keyboard
*------------------------------------------------------------------*/
#define PBUF_SIZE 32
static uint8_t pbuf[PBUF_SIZE];
static uint8_t pbuf_head = 0;
static uint8_t pbuf_tail = 0;
static inline void pbuf_enqueue(uint8_t data)
{
uint8_t sreg = SREG;
cli();
uint8_t next = (pbuf_head + 1) % PBUF_SIZE;
if (next != pbuf_tail) {
pbuf[pbuf_head] = data;
pbuf_head = next;
} else {
print("pbuf: full\n");
}
SREG = sreg;
}
static inline uint8_t pbuf_dequeue(void)
{
uint8_t val = 0;
uint8_t sreg = SREG;
cli();
if (pbuf_head != pbuf_tail) {
val = pbuf[pbuf_tail];
pbuf_tail = (pbuf_tail + 1) % PBUF_SIZE;
}
SREG = sreg;
return val;
}
static inline bool pbuf_has_data(void)
{
uint8_t sreg = SREG;
cli();
bool has_data = (pbuf_head != pbuf_tail);
SREG = sreg;
return has_data;
}
static inline void pbuf_clear(void)
{
uint8_t sreg = SREG;
cli();
pbuf_head = pbuf_tail = 0;
SREG = sreg;
}

75
tmk_core/protocol/xt.h Normal file
View File

@ -0,0 +1,75 @@
/*
Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com>
Copyright 2016 Ethan Apodaca <papodaca@gmail.com>
This software is licensed with a Modified BSD License.
All of this is supposed to be Free Software, Open Source, DFSG-free,
GPL-compatible, and OK to use in both free and proprietary applications.
Additions and corrections to this file are welcome.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of the copyright holders nor the names of
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef XT_H
#define XT_H
#include <stdbool.h>
#include "wait.h"
#include "xt_io.h"
#include "print.h"
void xt_host_init(void);
uint8_t xt_host_recv(void);
/*--------------------------------------------------------------------
* static functions
*------------------------------------------------------------------*/
static inline uint16_t wait_clock_lo(uint16_t us)
{
while (clock_in() && us) { asm(""); wait_us(1); us--; }
return us;
}
static inline uint16_t wait_clock_hi(uint16_t us)
{
while (!clock_in() && us) { asm(""); wait_us(1); us--; }
return us;
}
static inline uint16_t wait_data_lo(uint16_t us)
{
while (data_in() && us) { asm(""); wait_us(1); us--; }
return us;
}
static inline uint16_t wait_data_hi(uint16_t us)
{
while (!data_in() && us) { asm(""); wait_us(1); us--; }
return us;
}
#endif

View File

@ -0,0 +1,94 @@
/*
Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com>
This software is licensed with a Modified BSD License.
All of this is supposed to be Free Software, Open Source, DFSG-free,
GPL-compatible, and OK to use in both free and proprietary applications.
Additions and corrections to this file are welcome.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of the copyright holders nor the names of
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
/*
* PS/2 protocol Pin interrupt version
*/
#include <stdbool.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "pbuff.h"
#include "xt.h"
#include "xt_io.h"
#include "wait.h"
#include "print.h"
void xt_host_init(void)
{
XT_INT_INIT();
XT_INT_ON();
}
/* get data received by interrupt */
uint8_t xt_host_recv(void)
{
if (pbuf_has_data()) {
return pbuf_dequeue();
} else {
return 0;
}
}
ISR(XT_INT_VECT)
{
static uint8_t state = 0;
static uint8_t data = 0;
if (state == 0) {
if (data_in())
state++;
} else if (state >= 1 && state <= 8) {
wait_clock_lo(20);
data >>= 1;
if (data_in())
data |= 0x80;
if (state == 8)
goto END;
state++;
} else {
goto DONE;
}
goto RETURN;
END:
pbuf_enqueue(data);
DONE:
state = 0;
data = 0;
RETURN:
return;
}

View File

@ -0,0 +1,7 @@
#ifndef XT_IO_H
#define XT_IO_H
bool clock_in(void);
bool data_in(void);
#endif

View File

@ -0,0 +1,34 @@
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
/* Check port settings for clock and data line */
#if !(defined(XT_CLOCK_PORT) && \
defined(XT_CLOCK_PIN) && \
defined(XT_CLOCK_DDR) && \
defined(XT_CLOCK_BIT))
# error "XT clock port setting is required in config.h"
#endif
#if !(defined(XT_DATA_PORT) && \
defined(XT_DATA_PIN) && \
defined(XT_DATA_DDR) && \
defined(XT_DATA_BIT))
# error "XT data port setting is required in config.h"
#endif
bool clock_in(void)
{
XT_CLOCK_DDR &= ~(1<<XT_CLOCK_BIT);
XT_CLOCK_PORT |= (1<<XT_CLOCK_BIT);
_delay_us(1);
return XT_CLOCK_PIN&(1<<XT_CLOCK_BIT);
}
bool data_in(void)
{
XT_DATA_DDR &= ~(1<<XT_DATA_BIT);
XT_DATA_PORT |= (1<<XT_DATA_BIT);
_delay_us(1);
return XT_DATA_PIN&(1<<XT_DATA_BIT);
}