Merge branch 'hhkb_tmk'
This commit is contained in:
tmk
commit
f4c69652c1
129
keyboard/hhkb/Makefile.tmk
Normal file
129
keyboard/hhkb/Makefile.tmk
Normal file
@ -0,0 +1,129 @@
|
|||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = hhkb_tmk
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TOP_DIR = ../..
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
|
||||||
|
# List C source files here. (C dependencies are automatically generated.)
|
||||||
|
SRC += keymap.c \
|
||||||
|
matrix.c \
|
||||||
|
led.c
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1286
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
|
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
|
||||||
|
include $(TOP_DIR)/protocol/lufa.mk
|
||||||
|
include $(TOP_DIR)/common.mk
|
||||||
|
include $(TOP_DIR)/rules.mk
|
||||||
|
|
||||||
|
debug-on: EXTRAFLAGS += -DDEBUG
|
||||||
|
debug-on: all
|
||||||
@ -2,128 +2,144 @@ Alternative Controller for HHKB Pro
|
|||||||
===================================
|
===================================
|
||||||
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
|
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
|
||||||
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
|
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
|
||||||
controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller.
|
controller with programmable one. This controller can work with HHKB Professional and Professional 2 model.
|
||||||
|
|
||||||
|
See [this thread][AltController] in geekhack.org.
|
||||||
|
|
||||||
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
|
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
|
||||||
|
[AltController]: http://geekhack.org/index.php?topic=12047.0
|
||||||
[Teensy]: http://www.pjrc.com/teensy/
|
[Teensy]: http://www.pjrc.com/teensy/
|
||||||
|
|
||||||
|
|
||||||
My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard
|
|
||||||
See directory keyboard/hhkb to build firmware for HHKB.
|
|
||||||
|
|
||||||
|
|
||||||
##Features
|
##Features
|
||||||
* Customizable keymap
|
* Customizable keymap
|
||||||
* More keymap layers(more Fn keys)
|
* More keymap layers(more Fn keys)
|
||||||
* Mouse keys
|
* Mouse keys
|
||||||
* USB NKRO
|
* USB NKRO
|
||||||
|
|
||||||
|
See README of [tmk_keyboard] for more.
|
||||||
|
|
||||||
|
[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
|
||||||
|
|
||||||
###Pros
|
###Pros
|
||||||
|
* No risk: Everything is all reversible
|
||||||
* Without PCB trace cutting, case mod or any destructives
|
* Without PCB trace cutting, case mod or any destructives
|
||||||
* Can keep original controller intact
|
* Can keep original controller intact
|
||||||
* Can change all HHKB behaviour as you like
|
* Can change all HHKB behaviour as you like
|
||||||
|
|
||||||
###Cons
|
###Cons
|
||||||
* Void your warranty
|
* Void your warranty
|
||||||
* Lose USB hub function in case of Pro2
|
* Lose USB hub function of Pro2
|
||||||
|
|
||||||
##DISCLAIMER
|
##DISCLAIMER
|
||||||
I'm not a professional of electronics or MCU programming. This may damage your HHKB.
|
I'm not a professional of electronics nor MCU programming. This may damage your HHKB.
|
||||||
And my English writing is poor, I'm not sure I can convey my notions accurately.
|
And my English writing is poor, I'm not sure I can convey my notions accurately.
|
||||||
|
|
||||||
|
|
||||||
|
##Documents
|
||||||
|
See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HHKB and this controller.
|
||||||
|
|
||||||
|
|
||||||
|
##Build Firmware & Program
|
||||||
|
You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]).
|
||||||
|
|
||||||
|
### Install Tools
|
||||||
|
See [this document](../../doc/build.md).
|
||||||
|
|
||||||
|
### TMK Alt Controller Board
|
||||||
|
$ make -f Makefile.tmk
|
||||||
|
|
||||||
|
This programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
|
||||||
|
|
||||||
|
$ make -f Makefile.tmk dfu
|
||||||
|
|
||||||
|
Push reset button and program with [FLIP]. The tool should be intalled and configured properly.
|
||||||
|
|
||||||
|
$ make -f Makefile.tmk flip
|
||||||
|
|
||||||
|
Or you can also program with FLIP GUI.
|
||||||
|
|
||||||
|
[dfu-programmer]: http://dfu-programmer.sourceforge.net/
|
||||||
|
[FLIP]: http://www.atmel.com/tools/FLIP.aspx
|
||||||
|
|
||||||
|
|
||||||
##Build Firmware
|
### PJRC Teensy++
|
||||||
You can choose some combination of MCU and USB protocol stack.
|
Build with [LUFA] USB stack:
|
||||||
|
|
||||||
### Teensy++(AVR USB family) with [LUFA]
|
$ make -f Makefile.lufa
|
||||||
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
|
|
||||||
|
|
||||||
1. Edit **keymap.c** to use your favoirte keymap.
|
or with [PJRC] USB stack:
|
||||||
|
|
||||||
2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0.
|
$ make -f Makefile.pjrc
|
||||||
|
|
||||||
3. Build firmware binary file:
|
Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly.
|
||||||
`$ make -f Makefile.lufa`
|
|
||||||
|
|
||||||
4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run:
|
$ make -f Makefile.lufa teensy
|
||||||
`$ make -f Makefile.lufa teensy`
|
$ make -f Makefile.pjrc teensy
|
||||||
|
|
||||||
|
Or you can also program with [Teensy Loader(GUI)].
|
||||||
|
|
||||||
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
|
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
|
||||||
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
|
[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
|
||||||
|
[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html
|
||||||
|
[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html
|
||||||
|
|
||||||
|
|
||||||
###AVR Mega with [V-USB]
|
###AVR Mega with [V-USB]
|
||||||
Follow below if you want to use AVR with V-USB as .
|
Build:
|
||||||
|
$ make -f Makefile.vusb
|
||||||
|
|
||||||
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
|
Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude].
|
||||||
|
|
||||||
1. Edit **keymap.c** to use your favoirte keymap.
|
You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU.
|
||||||
|
$ make -f Makefile.vusb program
|
||||||
|
|
||||||
2. Edit **usbconfig.h** to configure V-USB options.
|
[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx
|
||||||
|
[avrdude]: http://www.nongnu.org/avrdude/
|
||||||
3. Edit **Makefile.vusb** to define `MCU` and `F_CPU`.
|
|
||||||
|
|
||||||
4. Build firmware binary file:
|
|
||||||
`$ make -f Makefile.vusb`
|
|
||||||
|
|
||||||
5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run:
|
|
||||||
`$ make -f Makefile.vusb program`
|
|
||||||
|
|
||||||
[V-USB]: http://www.obdev.at/products/vusb/index.html
|
|
||||||
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
|
|
||||||
|
|
||||||
|
|
||||||
###How to Customize Keymap
|
##How to Customize
|
||||||
Later...
|
See [tmk_keyboard] documents.
|
||||||
See **keymap.c**.
|
|
||||||
|
|
||||||
|
|
||||||
##Hardware
|
##Hardware
|
||||||
|
You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY.
|
||||||
|
|
||||||
###Teensy++ installation
|
###1. TMK Alt Controller Board
|
||||||
Angled USB mini B adapter is used to install Teensy++ laterally.
|
TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
|
||||||
|
See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
|
||||||
|
|
||||||
|
|
||||||
Bread baord wires are used to connect Teensy++.
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
###PJRC Teensy++ 2.0 connection
|
###2. PJRC Teensy++ 2.0 connection
|
||||||
+---------------+
|
+---------------+
|
||||||
| Teensy++ |
|
| Teensy++ |
|
||||||
| |
|
| |
|
||||||
| | HHKB
|
| | HHKB pro HHKB pro2
|
||||||
| | ~~~~
|
| | ~~~~~~~~ ~~~~~~~~~
|
||||||
| PB0-2|------->ROW(6-8)
|
| PB0-2|------->ROW (6-8) (5-7)
|
||||||
| PB3-5|------->COL(9-11)
|
| PB3-5|------->COL (9-11) (8-10)
|
||||||
| PB6|------->ENABLE(12)
|
| PB6|------->ENABLE (12) (11)
|
||||||
| PE6|<-------KEY(4)
|
| PE6|<-------KEY (4) (3)
|
||||||
| PE7|------->PREV(5)
|
| PE7|------->PREV (5) (4)
|
||||||
| |
|
|
||||||
| |
|
|
||||||
| |
|
| |
|
||||||
|
| | 5V--- (1-3) (1-2)
|
||||||
|
| | GND--- (13-14) (12-13)
|
||||||
+---------------+
|
+---------------+
|
||||||
|
|
||||||
|
- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
|
||||||
|
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
|
||||||
|
|
||||||
###V-USB circuit
|
###3. V-USB connection
|
||||||
+---+ +---------------+
|
+---+ +---------------+
|
||||||
USB GND | | ATmega168 |
|
USB GND | | ATmega328p |
|
||||||
~~~ C3 | |
|
~~~ C3 | |
|
||||||
5V <-------+--------+---|Vcc,AVCC | HHKB
|
5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2
|
||||||
R1 | | ~~~~
|
R1 | | ~~~~~~~~ ~~~~
|
||||||
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
|
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7)
|
||||||
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10)
|
||||||
Z1 Z2 | PC3|------->ENABLE(12)
|
Z1 Z2 | PC3|------->ENABLE (12) (11)
|
||||||
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
GND<----+---+-----------|GND PB0|<-------KEY (4) (3)
|
||||||
| PB1|------->PREV(5)
|
| PB1|------->PREV (5) (4)
|
||||||
| |
|
| |
|
||||||
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
||||||
X1 | TXD|<-------Debug Console
|
X1 | TXD|<-------Debug Console
|
||||||
@ -134,5 +150,11 @@ Bread baord wires are used to connect Teensy++.
|
|||||||
Z1,Z2: Zener 3.6V
|
Z1,Z2: Zener 3.6V
|
||||||
C1,C2: 22pF
|
C1,C2: 22pF
|
||||||
C3: 0.1uF
|
C3: 0.1uF
|
||||||
X1: Crystal 20MHz(16MHz/12MHz)
|
X1: Crystal 12MHz
|
||||||
SW: Push Switch(Optional for bootloader)
|
SW: Push Switch(for bootloader)
|
||||||
|
|
||||||
|
- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
|
||||||
|
- NOTE: [USBaspLoader] is very useful for firmware update.
|
||||||
|
|
||||||
|
[V-USB]: http://www.obdev.at/products/vusb/index.html
|
||||||
|
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
|
||||||
|
|||||||
@ -54,7 +54,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* period of tapping(ms) */
|
/* period of tapping(ms) */
|
||||||
#define TAPPING_TERM 200
|
#define TAPPING_TERM 300
|
||||||
/* tap count needed for toggling a feature */
|
/* tap count needed for toggling a feature */
|
||||||
#define TAPPING_TOGGLE 5
|
#define TAPPING_TOGGLE 5
|
||||||
|
|
||||||
|
|||||||
@ -30,25 +30,27 @@ Connector Cable
|
|||||||
Two PCBs are connected by 15 lines(13 in case of Pro2).
|
Two PCBs are connected by 15 lines(13 in case of Pro2).
|
||||||
Vcc and GND use 3(2) lines each, other 9 lines are for keyboard signaling.
|
Vcc and GND use 3(2) lines each, other 9 lines are for keyboard signaling.
|
||||||
|
|
||||||
Keyswitch PCB connector Teensy++ pins
|
Keyswitch connector
|
||||||
-------------------------------------------------------------------------------
|
pro pro2 Description Teensy++ pins
|
||||||
|
--------------------------------------------------------------------------------------------
|
||||||
1 Vcc(5V) Not exist on Pro2 5V
|
1 Vcc(5V) Not exist on Pro2 5V
|
||||||
2 Vcc(5V) 5V
|
2 1 Vcc(5V) 5V
|
||||||
3 Vcc(5V) 5V
|
3 2 Vcc(5V) 5V
|
||||||
4 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
|
4 3 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
|
||||||
5 TP1684 KEY_PREV: assert previous key state??? PE7 output
|
5 4 TP1684 KEY_PREV: make threshold PE7 output
|
||||||
6 HC4051 A(bit0) select 8 rows(0 to 7) PB0 output
|
6 5 HC4051 A(bit0)\ PB0 output
|
||||||
7 HC4051 B(bit1) PB1 output
|
7 6 HC4051 B(bit1) > select row(0 to 7) PB1 output
|
||||||
8 HC4051 C(bit2) PB2 output
|
8 7 HC4051 C(bit2)/ PB2 output
|
||||||
9 LS145 A(bit0) select 8 columns(0 to 7) PB3 output
|
9 8 LS145 A(bit0)\ PB3 output
|
||||||
10 LS145 B(bit1) PB4 output
|
10 9 LS145 B(bit1) > select column(0 to 7) PB4 output
|
||||||
11 LS145 C(bit2) PB5 output
|
11 10 LS145 C(bit2)/ PB5 output
|
||||||
12 LS145 D(enable) Low(0) enable selected column PB6 output
|
12 11 LS145 D(enable) Low(0) enables selected column PB6 output
|
||||||
13 GND GND
|
13 12 GND GND
|
||||||
14 GND GND
|
14 13 GND GND
|
||||||
15 GND Not exist on Pro2 GND
|
15 GND Not exist on Pro2 GND
|
||||||
|
|
||||||
NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing.
|
NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing.
|
||||||
|
NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK.
|
||||||
|
|
||||||
(HHKB_connector.jpg)
|
(HHKB_connector.jpg)
|
||||||
|
|
||||||
|
|||||||
48
keyboard/hhkb/doc/Power.txt
Normal file
48
keyboard/hhkb/doc/Power.txt
Normal file
@ -0,0 +1,48 @@
|
|||||||
|
HHKB Power consumption
|
||||||
|
----------------------
|
||||||
|
|
||||||
|
**Power consumption
|
||||||
|
board clock/prescaler keyswitch power ctrl current
|
||||||
|
--------------------------------------------------------------------------
|
||||||
|
tmk 16MHz no no 26.4mA
|
||||||
|
tmk 16MHz pro1 no 45.1mA
|
||||||
|
tmk 16MHz/2 no no 18.1mA
|
||||||
|
tmk 16MHz/2 pro1 no 37.3mA
|
||||||
|
tmk 8MHz no no 18.9mA
|
||||||
|
tmk 8MHz pro2 no(w/o FET) 32.1mA
|
||||||
|
tmk 8MHz pro2 no(w FET) 32.1mA withou POWER_ON/FF
|
||||||
|
tmk 8MHz pro2 no(w FET) 32.6mA with POWR_ON/OFF
|
||||||
|
tmk 8MHz pro2 15ms(w FET) 21.3mA with POWR_ON/OFF, enumerated but error -32
|
||||||
|
tmk 8MHz pro2 60ms(w FET) 13.3mA with POWR_ON/OFF, not enumerated
|
||||||
|
|
||||||
|
gh60 16MHz 25.8mA
|
||||||
|
gh60 16MHz USB suspend w LED breathing 17.6-29.1mA
|
||||||
|
gh60 16MHz USB suspend w/o LED 0.2mA(0.231-0.276mA)
|
||||||
|
Poker 5.6mA
|
||||||
|
Poker USB suspend 0.3mA(0.301mA)
|
||||||
|
gh60 16MHz stock firmware by komar 26.8mA
|
||||||
|
|
||||||
|
|
||||||
|
HHKB pro2 Over All 139.4mA
|
||||||
|
HHKB pro2 Controller 115.1mA
|
||||||
|
HHKB pro1 Controller 25.9mA
|
||||||
|
|
||||||
|
|
||||||
|
keyswitch power consumption:
|
||||||
|
pro1: 45.1-26.4=18.7mA
|
||||||
|
37.3-18.1=19.2mA
|
||||||
|
pro2: 32.1-18.9=13.2mA
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
**Low Freq Crystal or Prescaler?
|
||||||
|
No advantage of Low Freq Crystal against Prescaled.
|
||||||
|
|
||||||
|
Clock routing
|
||||||
|
X'tal --+---->Prescaler-------> System Clock
|
||||||
|
|
|
||||||
|
+---------------------> USB PLL
|
||||||
|
|
||||||
|
Design Decision: Install 16MHz crystal on board with using clock rescaler.
|
||||||
@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License
|
|||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#include <avr/io.h>
|
||||||
#include "stdint.h"
|
#include "stdint.h"
|
||||||
#include "led.h"
|
#include "led.h"
|
||||||
|
|
||||||
@ -22,5 +23,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
/* HHKB has no LEDs */
|
/* HHKB has no LEDs */
|
||||||
void led_set(uint8_t usb_led)
|
void led_set(uint8_t usb_led)
|
||||||
{
|
{
|
||||||
|
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||||
|
DDRD |= (1<<6);
|
||||||
|
PORTD |= (1<<6);
|
||||||
|
} else {
|
||||||
|
DDRD |= (1<<6);
|
||||||
|
PORTD &= ~(1<<6);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@ -73,6 +73,50 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
|
|||||||
#define KEY_POWER_ON()
|
#define KEY_POWER_ON()
|
||||||
#define KEY_POWER_OFF()
|
#define KEY_POWER_OFF()
|
||||||
|
|
||||||
|
#elif defined(__AVR_ATmega32U4__)
|
||||||
|
// Ports for my designed Alt Controller PCB
|
||||||
|
// row: PB0-2
|
||||||
|
// col: PB3-5,6
|
||||||
|
// key: PD7(pull-uped)
|
||||||
|
// prev: PB7
|
||||||
|
// power: PD4(L:off/H:on)
|
||||||
|
#define KEY_INIT() do { \
|
||||||
|
DDRB = 0xFF; \
|
||||||
|
PORTB = 0x00; \
|
||||||
|
DDRD &= ~0x80; \
|
||||||
|
PORTD |= 0x80; \
|
||||||
|
/* keyswitch board power on */ \
|
||||||
|
DDRD |= (1<<4); \
|
||||||
|
PORTD |= (1<<4); \
|
||||||
|
KEY_UNABLE(); \
|
||||||
|
KEY_PREV_OFF(); \
|
||||||
|
} while (0)
|
||||||
|
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
|
||||||
|
(((COL) & 0x07)<<3) | \
|
||||||
|
((ROW) & 0x07))
|
||||||
|
#define KEY_ENABLE() (PORTB &= ~(1<<6))
|
||||||
|
#define KEY_UNABLE() (PORTB |= (1<<6))
|
||||||
|
#define KEY_STATE() (PIND & (1<<7))
|
||||||
|
#define KEY_PREV_ON() (PORTB |= (1<<7))
|
||||||
|
#define KEY_PREV_OFF() (PORTB &= ~(1<<7))
|
||||||
|
#define KEY_POWER_ON()
|
||||||
|
#define KEY_POWER_OFF()
|
||||||
|
/*
|
||||||
|
#define KEY_POWER_ON() do { \
|
||||||
|
KEY_INIT(); \
|
||||||
|
PORTD |= (1<<4); \
|
||||||
|
_delay_ms(1); \
|
||||||
|
} while (0)
|
||||||
|
#define KEY_POWER_OFF() do { \
|
||||||
|
PORTD &= ~(1<<4); \
|
||||||
|
DDRB &= ~0xFF; \
|
||||||
|
PORTB &= ~0xFF; \
|
||||||
|
DDRB &= ~0x80; \
|
||||||
|
PORTB &= ~0x80; \
|
||||||
|
} while (0)
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
#elif defined(__AVR_ATmega328P__)
|
#elif defined(__AVR_ATmega328P__)
|
||||||
// Ports for V-USB
|
// Ports for V-USB
|
||||||
// key: PB0(pull-uped)
|
// key: PB0(pull-uped)
|
||||||
@ -130,7 +174,6 @@ uint8_t matrix_cols(void)
|
|||||||
void matrix_init(void)
|
void matrix_init(void)
|
||||||
{
|
{
|
||||||
#ifdef DEBUG
|
#ifdef DEBUG
|
||||||
print_enable = true;
|
|
||||||
debug_enable = true;
|
debug_enable = true;
|
||||||
debug_keyboard = true;
|
debug_keyboard = true;
|
||||||
#endif
|
#endif
|
||||||
@ -170,9 +213,21 @@ uint8_t matrix_scan(void)
|
|||||||
uint8_t last = TIMER_RAW;
|
uint8_t last = TIMER_RAW;
|
||||||
|
|
||||||
KEY_ENABLE();
|
KEY_ENABLE();
|
||||||
|
|
||||||
// Wait for KEY_STATE outputs its value.
|
// Wait for KEY_STATE outputs its value.
|
||||||
// 1us was ok on one HHKB, but not worked on another.
|
// 1us was ok on one HHKB, but not worked on another.
|
||||||
_delay_us(10);
|
// no wait doesn't work on Teensy++ with pro(1us works)
|
||||||
|
// no wait does work on tmk PCB(8MHz) with pro2
|
||||||
|
// 1us wait does work on both of above
|
||||||
|
// 1us wait doesn't work on tmk(16MHz)
|
||||||
|
// 5us wait does work on tmk(16MHz)
|
||||||
|
// 5us wait does work on tmk(16MHz/2)
|
||||||
|
// 5us wait does work on tmk(8MHz)
|
||||||
|
// 10us wait does work on Teensy++ with pro
|
||||||
|
// 10us wait does work on 328p+iwrap with pro
|
||||||
|
// 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
|
||||||
|
_delay_us(5);
|
||||||
|
|
||||||
if (KEY_STATE()) {
|
if (KEY_STATE()) {
|
||||||
matrix[row] &= ~(1<<col);
|
matrix[row] &= ~(1<<col);
|
||||||
} else {
|
} else {
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user