Merge branch 'ps2_unimap'
This commit is contained in:
tmk
commit
fa32e4d870
@ -1,31 +1,39 @@
|
|||||||
#
|
|
||||||
# Makefile for Teensy
|
|
||||||
#
|
|
||||||
# Target file name (without extension).
|
# Target file name (without extension).
|
||||||
TARGET = ps2_usb_lufa
|
TARGET ?= ps2_usb
|
||||||
|
|
||||||
# Directory common source filess exist
|
# Directory common source filess exist
|
||||||
TMK_DIR = ../../tmk_core
|
TMK_DIR ?= ../../tmk_core
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
# Directory keyboard dependent files exist
|
||||||
TARGET_DIR = .
|
TARGET_DIR ?= .
|
||||||
|
|
||||||
# project specific files
|
# project specific files
|
||||||
SRC = matrix.c \
|
SRC ?= matrix.c \
|
||||||
led.c
|
led.c
|
||||||
|
|
||||||
ifdef KEYMAP
|
#
|
||||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
# Keymap file
|
||||||
|
#
|
||||||
|
ifdef UNIMAP_ENABLE
|
||||||
|
KEYMAP_FILE = unimap
|
||||||
else
|
else
|
||||||
SRC := keymap_plain.c $(SRC)
|
ifdef ACTIONMAP_ENABLE
|
||||||
|
KEYMAP_FILE = actionmap
|
||||||
|
else
|
||||||
|
KEYMAP_FILE = keymap
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
ifdef KEYMAP
|
||||||
|
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
|
||||||
|
else
|
||||||
|
SRC := $(KEYMAP_FILE)_plain.c $(SRC)
|
||||||
endif
|
endif
|
||||||
|
|
||||||
CONFIG_H = config.h
|
CONFIG_H ?= config.h
|
||||||
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
MCU ?= atmega32u2
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
# Processor frequency.
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
@ -38,14 +46,14 @@ MCU = atmega32u4
|
|||||||
# does not *change* the processor frequency - it should merely be updated to
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
# software delays.
|
# software delays.
|
||||||
F_CPU = 16000000
|
F_CPU ?= 16000000
|
||||||
|
|
||||||
|
|
||||||
#
|
#
|
||||||
# LUFA specific
|
# LUFA specific
|
||||||
#
|
#
|
||||||
# Target architecture (see library "Board Types" documentation).
|
# Target architecture (see library "Board Types" documentation).
|
||||||
ARCH = AVR8
|
ARCH ?= AVR8
|
||||||
|
|
||||||
# Input clock frequency.
|
# Input clock frequency.
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
@ -58,7 +66,7 @@ ARCH = AVR8
|
|||||||
#
|
#
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
F_USB = $(F_CPU)
|
F_USB ?= $(F_CPU)
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
# Interrupt driven control endpoint task(+60)
|
||||||
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
@ -70,25 +78,26 @@ F_USB = $(F_CPU)
|
|||||||
# Atmel DFU loader 4096
|
# Atmel DFU loader 4096
|
||||||
# LUFA bootloader 4096
|
# LUFA bootloader 4096
|
||||||
# USBaspLoader 2048
|
# USBaspLoader 2048
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
BOOTLOADER_SIZE ?= 4096
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=$(BOOTLOADER_SIZE)
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
|
||||||
|
|
||||||
|
|
||||||
# PS/2 Options
|
# PS/2 Options
|
||||||
#
|
#
|
||||||
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
|
#PS2_USE_USART ?= yes # uses hardware USART engine for PS/2 signal receive(recomened)
|
||||||
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
|
PS2_USE_INT ?= yes # uses external interrupt for falling edge of PS/2 clock pin
|
||||||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
|
#PS2_USE_BUSYWAIT ?= yes # uses primitive reference code
|
||||||
|
|
||||||
|
|
||||||
# Optimize size but this may cause error "relocation truncated to fit"
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
|||||||
@ -1,74 +0,0 @@
|
|||||||
# Target file name (without extension).
|
|
||||||
TARGET = ps2_usb_pjrc
|
|
||||||
|
|
||||||
# Directory common source filess exist
|
|
||||||
TMK_DIR = ../../tmk_core
|
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
|
||||||
TARGET_DIR = .
|
|
||||||
|
|
||||||
# keyboard dependent files
|
|
||||||
SRC = matrix.c \
|
|
||||||
led.c
|
|
||||||
|
|
||||||
ifdef KEYMAP
|
|
||||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
|
||||||
else
|
|
||||||
SRC := keymap_plain.c $(SRC)
|
|
||||||
endif
|
|
||||||
|
|
||||||
CONFIG_H = config.h
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name, you MUST set this to match the board you are using
|
|
||||||
# type "make clean" after changing this, so all files will be rebuilt
|
|
||||||
#MCU = at90usb162 # Teensy 1.0
|
|
||||||
MCU = atmega32u4 # Teensy 2.0
|
|
||||||
#MCU = at90usb646 # Teensy++ 1.0
|
|
||||||
#MCU = at90usb1286 # Teensy++ 2.0
|
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# Normally the first thing your program should do is set the clock prescaler,
|
|
||||||
# so your program will run at the correct speed. You should also set this
|
|
||||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
|
||||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# *Comment out* to disable the options.
|
|
||||||
#
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
|
||||||
|
|
||||||
|
|
||||||
# PS/2 Options
|
|
||||||
#
|
|
||||||
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
|
|
||||||
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
|
|
||||||
PS2_USE_BUSYWAIT = yes # uses primitive reference code
|
|
||||||
|
|
||||||
|
|
||||||
# Search Path
|
|
||||||
VPATH += $(TARGET_DIR)
|
|
||||||
VPATH += $(TMK_DIR)
|
|
||||||
|
|
||||||
|
|
||||||
include $(TMK_DIR)/protocol.mk
|
|
||||||
include $(TMK_DIR)/protocol/pjrc.mk
|
|
||||||
include $(TMK_DIR)/common.mk
|
|
||||||
include $(TMK_DIR)/rules.mk
|
|
||||||
17
converter/ps2_usb/Makefile.rev1
Normal file
17
converter/ps2_usb/Makefile.rev1
Normal file
@ -0,0 +1,17 @@
|
|||||||
|
TARGET ?= ps2_usb_rev1
|
||||||
|
MCU = atmega32u4
|
||||||
|
CONFIG_H = config_rev1.h
|
||||||
|
BOOTLOADER_SIZE = 4096
|
||||||
|
|
||||||
|
BOOTMAGIC_ENABLE ?= no
|
||||||
|
MOUSEKEY_ENABLE ?= yes
|
||||||
|
EXTRAKEY_ENABLE ?= yes
|
||||||
|
CONSOLE_ENABLE ?= yes
|
||||||
|
COMMAND_ENABLE ?= yes
|
||||||
|
NKRO_ENABLE ?= yes
|
||||||
|
|
||||||
|
PS2_USE_USART = yes
|
||||||
|
PS2_USE_INT = no
|
||||||
|
PS2_USE_BUSYWAIT = no
|
||||||
|
|
||||||
|
include Makefile
|
||||||
17
converter/ps2_usb/Makefile.rev2
Normal file
17
converter/ps2_usb/Makefile.rev2
Normal file
@ -0,0 +1,17 @@
|
|||||||
|
TARGET ?= ps2_usb_rev2
|
||||||
|
MCU = atmega32u2
|
||||||
|
CONFIG_H = config_rev2.h
|
||||||
|
BOOTLOADER_SIZE = 4096
|
||||||
|
|
||||||
|
BOOTMAGIC_ENABLE ?= no
|
||||||
|
MOUSEKEY_ENABLE ?= no
|
||||||
|
EXTRAKEY_ENABLE ?= yes
|
||||||
|
CONSOLE_ENABLE ?= yes
|
||||||
|
COMMAND_ENABLE ?= yes
|
||||||
|
NKRO_ENABLE ?= yes
|
||||||
|
|
||||||
|
PS2_USE_USART = no
|
||||||
|
PS2_USE_INT = yes
|
||||||
|
PS2_USE_BUSYWAIT = no
|
||||||
|
|
||||||
|
include Makefile
|
||||||
@ -1,97 +0,0 @@
|
|||||||
#
|
|
||||||
# Makefile for TMK keyboard converter rev2
|
|
||||||
# https://github.com/tmk/keyboard_converter#pcb-rev1
|
|
||||||
#
|
|
||||||
# Target file name (without extension).
|
|
||||||
TARGET = ps2_usb_tmk_rev1
|
|
||||||
|
|
||||||
# Directory common source filess exist
|
|
||||||
TMK_DIR = ../../tmk_core
|
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
|
||||||
TARGET_DIR = .
|
|
||||||
|
|
||||||
# project specific files
|
|
||||||
SRC = matrix.c \
|
|
||||||
led.c
|
|
||||||
|
|
||||||
ifdef KEYMAP
|
|
||||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
|
||||||
else
|
|
||||||
SRC := keymap_plain.c $(SRC)
|
|
||||||
endif
|
|
||||||
|
|
||||||
CONFIG_H = config_tmk_rev1.h
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name
|
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
|
||||||
|
|
||||||
|
|
||||||
# PS/2 Options
|
|
||||||
#
|
|
||||||
PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
|
|
||||||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
|
|
||||||
|
|
||||||
|
|
||||||
# Search Path
|
|
||||||
VPATH += $(TARGET_DIR)
|
|
||||||
VPATH += $(TMK_DIR)
|
|
||||||
|
|
||||||
include $(TMK_DIR)/protocol.mk
|
|
||||||
include $(TMK_DIR)/protocol/lufa.mk
|
|
||||||
include $(TMK_DIR)/common.mk
|
|
||||||
include $(TMK_DIR)/rules.mk
|
|
||||||
@ -1,97 +0,0 @@
|
|||||||
#
|
|
||||||
# Makefile for TMK keyboard converter rev2
|
|
||||||
# https://github.com/tmk/keyboard_converter#pcb-rev2
|
|
||||||
#
|
|
||||||
# Target file name (without extension).
|
|
||||||
TARGET = ps2_usb_tmk_rev2
|
|
||||||
|
|
||||||
# Directory common source filess exist
|
|
||||||
TMK_DIR = ../../tmk_core
|
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
|
||||||
TARGET_DIR = .
|
|
||||||
|
|
||||||
# project specific files
|
|
||||||
SRC = matrix.c \
|
|
||||||
led.c
|
|
||||||
|
|
||||||
ifdef KEYMAP
|
|
||||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
|
||||||
else
|
|
||||||
SRC := keymap_plain.c $(SRC)
|
|
||||||
endif
|
|
||||||
|
|
||||||
CONFIG_H = config_tmk_rev2.h
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name
|
|
||||||
MCU = atmega32u2
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
|
||||||
|
|
||||||
|
|
||||||
# PS/2 Options
|
|
||||||
#
|
|
||||||
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
|
|
||||||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
|
|
||||||
|
|
||||||
|
|
||||||
# Search Path
|
|
||||||
VPATH += $(TARGET_DIR)
|
|
||||||
VPATH += $(TMK_DIR)
|
|
||||||
|
|
||||||
include $(TMK_DIR)/protocol.mk
|
|
||||||
include $(TMK_DIR)/protocol/lufa.mk
|
|
||||||
include $(TMK_DIR)/common.mk
|
|
||||||
include $(TMK_DIR)/rules.mk
|
|
||||||
5
converter/ps2_usb/Makefile.unimap.rev1
Normal file
5
converter/ps2_usb/Makefile.unimap.rev1
Normal file
@ -0,0 +1,5 @@
|
|||||||
|
TARGET = ps2_usb_rev1_unimap
|
||||||
|
UNIMAP_ENABLE = yes
|
||||||
|
KEYMAP_SECTION_ENABLE = yes
|
||||||
|
|
||||||
|
include Makefile.rev1
|
||||||
5
converter/ps2_usb/Makefile.unimap.rev2
Normal file
5
converter/ps2_usb/Makefile.unimap.rev2
Normal file
@ -0,0 +1,5 @@
|
|||||||
|
TARGET = ps2_usb_rev2_unimap
|
||||||
|
UNIMAP_ENABLE = yes
|
||||||
|
KEYMAP_SECTION_ENABLE = yes
|
||||||
|
|
||||||
|
include Makefile.rev2
|
||||||
@ -5,36 +5,30 @@ This firmware converts PS/2 keyboard protocol to USB.(It supports Scan Code Set
|
|||||||
|
|
||||||
Connect Wires
|
Connect Wires
|
||||||
-------------
|
-------------
|
||||||
In case of Teensy2.0(ATMega32U4):
|
|
||||||
|
|
||||||
1. Connect **Vcc** and **GND**.
|
1. Connect **Vcc** and **GND**.
|
||||||
2. Connect **Clock** and **Data** line.
|
2. Connect **Clock** and **Data** line.
|
||||||
- **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
|
- **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
|
||||||
- **Busywait**: **Clock** is on `PD1` and **Data** on `PD0`.
|
- **Busywait**: **Clock** is on `PD1` and **Data** on `PD0`.
|
||||||
- **USART**: **Clock** is on `PD5` and **Data** on `PD2`.
|
- **USART**: **Clock** is on `PD5` and **Data** on `PD2`.
|
||||||
3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
|
3. You need pull-up resistors. 1K-10K Ohm would be fine.
|
||||||
|
|
||||||
To change pin configuration edit **config.h** and **Makefile**.
|
To change pin configuration edit **config.h** and **Makefile**.
|
||||||
|
|
||||||
|
|
||||||
Build Firmware
|
Build Firmware
|
||||||
--------------
|
--------------
|
||||||
For **PJRC Teensy** just run `make`:
|
For **TMK converter Rev.2**:
|
||||||
|
|
||||||
$ make clean
|
$ make -f Makefile.rev2 clean
|
||||||
$ make
|
$ make -f Makefile.rev2 KEYMAP=plain
|
||||||
|
|
||||||
To select keymap:
|
To program firmware push the button on converter and run:
|
||||||
|
|
||||||
$ make clean
|
$ make -f Makefile.rev2 KEYMAP=plain dfu
|
||||||
$ make KEYMAP=[plain|jis|spacefn|...]
|
|
||||||
|
|
||||||
After that you will find HEX file `ps2_usb_lufa.hex` in current directory.
|
|
||||||
|
|
||||||
|
|
||||||
- For **TMK converter Rev.1** use `make -f Makefile.tmk_rev1` instead of `make` and HEX file is `ps2_usb_tmk_rev1.hex`.
|
- For **TMK converter Rev.1** use `make -f Makefile.rev1` instead.
|
||||||
|
- To select keymap use `jis`, `spacefn` or your own in place of `plain`.
|
||||||
- For **TMK converter Rev.2** use `make -f Makefile.tmk_rev2` instead of `make` and HEX file is `ps2_usb_tmk_rev2.hex`.
|
|
||||||
|
|
||||||
|
|
||||||
Keymap
|
Keymap
|
||||||
|
|||||||
1288
converter/ps2_usb/binary/ps2_usb_rev1_unimap.hex
Normal file
1288
converter/ps2_usb/binary/ps2_usb_rev1_unimap.hex
Normal file
File diff suppressed because it is too large
Load Diff
1003
converter/ps2_usb/binary/ps2_usb_rev2_unimap.hex
Normal file
1003
converter/ps2_usb/binary/ps2_usb_rev2_unimap.hex
Normal file
File diff suppressed because it is too large
Load Diff
45
converter/ps2_usb/unimap_plain.c
Normal file
45
converter/ps2_usb/unimap_plain.c
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2016 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include "unimap_trans.h"
|
||||||
|
|
||||||
|
|
||||||
|
#define AC_FN0 ACTION_LAYER_MOMENTARY(1)
|
||||||
|
|
||||||
|
#ifdef KEYMAP_SECTION_ENABLE
|
||||||
|
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
|
||||||
|
#else
|
||||||
|
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] PROGMEM = {
|
||||||
|
#endif
|
||||||
|
UNIMAP(
|
||||||
|
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
|
||||||
|
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,
|
||||||
|
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
||||||
|
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
|
||||||
|
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NO, ENT, P4, P5, P6, PCMM,
|
||||||
|
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL,
|
||||||
|
LCTL,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,RGUI,FN0, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
|
||||||
|
),
|
||||||
|
UNIMAP(
|
||||||
|
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
|
||||||
|
GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,
|
||||||
|
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||||
|
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,UP, INS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||||
|
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,LEFT,RGHT, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
|
||||||
|
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,END, PGDN,DOWN, TRNS,TRNS, PGUP, TRNS,TRNS,TRNS,TRNS,
|
||||||
|
TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, HOME,PGDN,END, TRNS, TRNS,TRNS
|
||||||
|
),
|
||||||
|
};
|
||||||
100
converter/ps2_usb/unimap_trans.h
Normal file
100
converter/ps2_usb/unimap_trans.h
Normal file
@ -0,0 +1,100 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2016 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#ifndef UNIMAP_TRNAS_H
|
||||||
|
#define UNIMAP_TRNAS_H
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
#include "unimap.h"
|
||||||
|
|
||||||
|
|
||||||
|
/* Mapping to Universal keyboard layout
|
||||||
|
*
|
||||||
|
* Universal keyboard layout
|
||||||
|
* ,-----------------------------------------------.
|
||||||
|
* |F13|F14|F15|F16|F17|F18|F19|F20|F21|F22|F23|F24|
|
||||||
|
* ,---. |-----------------------------------------------| ,-----------. ,-----------.
|
||||||
|
* |Esc| |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|
|
||||||
|
* `---' `-----------------------------------------------' `-----------' `-----------'
|
||||||
|
* ,-----------------------------------------------------------. ,-----------. ,---------------.
|
||||||
|
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -|
|
||||||
|
* |-----------------------------------------------------------| |-----------| |---------------|
|
||||||
|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +|
|
||||||
|
* |-----------------------------------------------------------| `-----------' |---------------|
|
||||||
|
* |CapsL | A| S| D| F| G| H| J| K| L| ;| '| #|Retn| | 4| 5| 6|KP,|
|
||||||
|
* |-----------------------------------------------------------| ,---. |---------------|
|
||||||
|
* |Shft| <| Z| X| C| V| B| N| M| ,| .| /| RO|Shift | |Up | | 1| 2| 3|KP=|
|
||||||
|
* |-----------------------------------------------------------| ,-----------. |---------------|
|
||||||
|
* |Ctl|Gui|Alt|MHEN| Space |HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent|
|
||||||
|
* `-----------------------------------------------------------' `-----------' `---------------'
|
||||||
|
*
|
||||||
|
* PS/2 scan codes
|
||||||
|
* http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
|
||||||
|
* ,-----------------------------------------------.
|
||||||
|
* | 08| 10| 18| 20| 28| 30| 38| 40| 48| 50| 57| 5F|
|
||||||
|
* ,---. |-----------------------------------------------| ,-----------. ,-----------.
|
||||||
|
* | 76| | 05| 06| 04| 0C| 03| 0B| 83| 0A| 01| 09| 78| 07| | FC| 7E| FE| | A1| B2| A3|
|
||||||
|
* `---' `-----------------------------------------------' `-----------' `-----------'
|
||||||
|
* ,-----------------------------------------------------------. ,-----------. ,---------------.
|
||||||
|
* | 0E| 16| 1E| 26| 25| 2E| 36| 3D| 3E| 46| 45| 4E| 55| 6A| 66| | F0| EC| FD| | 77| CA| 7C| 7B|
|
||||||
|
* |-----------------------------------------------------------| |-----------| |---------------|
|
||||||
|
* | 0D | 15| 1D| 24| 2D| 2C| 35| 3C| 43| 44| 4D| 54| 5B| 5D | | F1| E9| FA| | 6C| 75| 7D| 79|
|
||||||
|
* |-----------------------------------------------------------| `-----------' |---------------|
|
||||||
|
* | 58 | 1C| 1B| 23| 2B| 34| 33| 3B| 42| 4B| 4C| 52| --| 5A | | 6B| 73| 74| 6D|
|
||||||
|
* |-----------------------------------------------------------| ,---. |---------------|
|
||||||
|
* | 12 | 61| 1A| 22| 21| 2A| 32| 31| 3A| 41| 49| 4A| 51| 59 | | F5| | 69| 72| 7A| 0F|
|
||||||
|
* |-----------------------------------------------------------| ,-----------. |---------------|
|
||||||
|
* | 14| 9F| 11| 67 | 29 | 64 | 13 | 91| A7| AF| 94| | EB| F2| F4| | 70 | 71| DA|
|
||||||
|
* `-----------------------------------------------------------' `-----------' `---------------'
|
||||||
|
*/
|
||||||
|
const uint8_t PROGMEM unimap_trans[MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
{ UNIMAP_NO, UNIMAP_F9, UNIMAP_NO, UNIMAP_F5, UNIMAP_F3, UNIMAP_F1, UNIMAP_F2, UNIMAP_F12 }, /* 00-07 */
|
||||||
|
{ UNIMAP_F13, UNIMAP_F10, UNIMAP_F8, UNIMAP_F6, UNIMAP_F4, UNIMAP_TAB, UNIMAP_GRV, UNIMAP_PEQL }, /* 08-0F */
|
||||||
|
{ UNIMAP_F14, UNIMAP_LALT, UNIMAP_LSHIFT,UNIMAP_KANA, UNIMAP_LCTL, UNIMAP_Q, UNIMAP_1, UNIMAP_NO }, /* 10-17 */
|
||||||
|
{ UNIMAP_F15, UNIMAP_NO, UNIMAP_Z, UNIMAP_S, UNIMAP_A, UNIMAP_W, UNIMAP_2, UNIMAP_NO }, /* 18-1F */
|
||||||
|
{ UNIMAP_F16, UNIMAP_C, UNIMAP_X, UNIMAP_D, UNIMAP_E, UNIMAP_4, UNIMAP_3, UNIMAP_NO }, /* 20-27 */
|
||||||
|
{ UNIMAP_F17, UNIMAP_SPACE, UNIMAP_V, UNIMAP_F, UNIMAP_T, UNIMAP_R, UNIMAP_5, UNIMAP_NO }, /* 28-2F */
|
||||||
|
{ UNIMAP_F18, UNIMAP_N, UNIMAP_B, UNIMAP_H, UNIMAP_G, UNIMAP_Y, UNIMAP_6, UNIMAP_NO }, /* 30-37 */
|
||||||
|
{ UNIMAP_F19, UNIMAP_NO, UNIMAP_M, UNIMAP_J, UNIMAP_U, UNIMAP_7, UNIMAP_8, UNIMAP_NO }, /* 38-3F */
|
||||||
|
{ UNIMAP_F20, UNIMAP_COMMA, UNIMAP_K, UNIMAP_I, UNIMAP_O, UNIMAP_0, UNIMAP_9, UNIMAP_NO }, /* 40-47 */
|
||||||
|
{ UNIMAP_F21, UNIMAP_DOT, UNIMAP_SLASH, UNIMAP_L, UNIMAP_SCOLON,UNIMAP_P, UNIMAP_MINUS, UNIMAP_NO }, /* 48-4F */
|
||||||
|
{ UNIMAP_F22, UNIMAP_RO, UNIMAP_QUOTE, UNIMAP_NO, UNIMAP_LBRC, UNIMAP_EQUAL, UNIMAP_NO, UNIMAP_F23 }, /* 50-57 */
|
||||||
|
{ UNIMAP_CAPS, UNIMAP_RSHIFT,UNIMAP_ENTER, UNIMAP_RBRC, UNIMAP_NO, UNIMAP_BSLASH,UNIMAP_NO, UNIMAP_F24 }, /* 58-5F */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NUBS, UNIMAP_NO, UNIMAP_NO, UNIMAP_HENK, UNIMAP_NO, UNIMAP_BSPACE,UNIMAP_MHEN }, /* 60-67 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_P1, UNIMAP_JYEN, UNIMAP_P4, UNIMAP_P7, UNIMAP_PCMM, UNIMAP_NO, UNIMAP_NO }, /* 68-6F */
|
||||||
|
{ UNIMAP_P0, UNIMAP_PDOT, UNIMAP_P2, UNIMAP_P5, UNIMAP_P6, UNIMAP_P8, UNIMAP_ESC, UNIMAP_NLCK }, /* 70-77 */
|
||||||
|
{ UNIMAP_F11, UNIMAP_PPLS, UNIMAP_P3, UNIMAP_PMNS, UNIMAP_PAST, UNIMAP_P9, UNIMAP_SLCK, UNIMAP_NO }, /* 78-7F */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_F7, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 80-87 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 88-8F */
|
||||||
|
{ UNIMAP_NO, UNIMAP_RALT, UNIMAP_NO, UNIMAP_NO, UNIMAP_RCTRL, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 90-97 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_LGUI }, /* 98-9F */
|
||||||
|
{ UNIMAP_NO, UNIMAP_VOLD, UNIMAP_NO, UNIMAP_MUTE, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_RGUI }, /* A0-A7 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_APP }, /* A8-AF */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_VOLU, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* B0-B7 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* B8-BF */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* C0-C7 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_PSLS, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* C8-CF */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* D0-D7 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_PENT, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* D8-DF */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* E0-E7 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_END, UNIMAP_NO, UNIMAP_LEFT, UNIMAP_HOME, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* E8-EF */
|
||||||
|
{ UNIMAP_INS, UNIMAP_DEL, UNIMAP_DOWN, UNIMAP_NO, UNIMAP_RIGHT, UNIMAP_UP, UNIMAP_NO, UNIMAP_NO }, /* F0-F7 */
|
||||||
|
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_PGDOWN,UNIMAP_NO, UNIMAP_PSCR, UNIMAP_PGUP, UNIMAP_PAUSE, UNIMAP_NO }, /* F8-FF */
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
@ -1,59 +1,59 @@
|
|||||||
PROTOCOL_DIR = protocol
|
PROTOCOL_DIR = protocol
|
||||||
|
|
||||||
|
|
||||||
ifdef PS2_MOUSE_ENABLE
|
ifeq (yes,$(strip $(PS2_MOUSE_ENABLE)))
|
||||||
SRC += $(PROTOCOL_DIR)/ps2_mouse.c
|
SRC += $(PROTOCOL_DIR)/ps2_mouse.c
|
||||||
OPT_DEFS += -DPS2_MOUSE_ENABLE
|
OPT_DEFS += -DPS2_MOUSE_ENABLE
|
||||||
OPT_DEFS += -DMOUSE_ENABLE
|
OPT_DEFS += -DMOUSE_ENABLE
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifdef PS2_USE_BUSYWAIT
|
ifeq (yes,$(strip $(PS2_USE_BUSYWAIT)))
|
||||||
SRC += protocol/ps2_busywait.c
|
SRC += protocol/ps2_busywait.c
|
||||||
SRC += protocol/ps2_io_avr.c
|
SRC += protocol/ps2_io_avr.c
|
||||||
OPT_DEFS += -DPS2_USE_BUSYWAIT
|
OPT_DEFS += -DPS2_USE_BUSYWAIT
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifdef PS2_USE_INT
|
ifeq (yes,$(strip $(PS2_USE_INT)))
|
||||||
SRC += protocol/ps2_interrupt.c
|
SRC += protocol/ps2_interrupt.c
|
||||||
SRC += protocol/ps2_io_avr.c
|
SRC += protocol/ps2_io_avr.c
|
||||||
OPT_DEFS += -DPS2_USE_INT
|
OPT_DEFS += -DPS2_USE_INT
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifdef PS2_USE_USART
|
ifeq (yes,$(strip $(PS2_USE_USART)))
|
||||||
SRC += protocol/ps2_usart.c
|
SRC += protocol/ps2_usart.c
|
||||||
SRC += protocol/ps2_io_avr.c
|
SRC += protocol/ps2_io_avr.c
|
||||||
OPT_DEFS += -DPS2_USE_USART
|
OPT_DEFS += -DPS2_USE_USART
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
|
||||||
ifdef XT_USE_INT
|
ifeq (yes,$(strip $(XT_USE_INT)))
|
||||||
SRC += protocol/xt_interrupt.c
|
SRC += protocol/xt_interrupt.c
|
||||||
SRC += protocol/xt_io_avr.c
|
SRC += protocol/xt_io_avr.c
|
||||||
OPT_DEFS += -DXT_USE_INT
|
OPT_DEFS += -DXT_USE_INT
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
|
||||||
ifdef SERIAL_MOUSE_MICROSOFT_ENABLE
|
ifeq (yes,$(strip $(SERIAL_MOUSE_MICROSOFT_ENABLE)))
|
||||||
SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c
|
SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c
|
||||||
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \
|
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \
|
||||||
-DMOUSE_ENABLE
|
-DMOUSE_ENABLE
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifdef SERIAL_MOUSE_MOUSESYSTEMS_ENABLE
|
ifeq (yes,$(strip $(SERIAL_MOUSE_MOUSESYSTEMS_ENABLE)))
|
||||||
SRC += $(PROTOCOL_DIR)/serial_mouse_mousesystems.c
|
SRC += $(PROTOCOL_DIR)/serial_mouse_mousesystems.c
|
||||||
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MOUSESYSTEMS \
|
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MOUSESYSTEMS \
|
||||||
-DMOUSE_ENABLE
|
-DMOUSE_ENABLE
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifdef SERIAL_MOUSE_USE_SOFT
|
ifeq (yes,$(strip $(SERIAL_MOUSE_USE_SOFT)))
|
||||||
SRC += $(PROTOCOL_DIR)/serial_soft.c
|
SRC += $(PROTOCOL_DIR)/serial_soft.c
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifdef SERIAL_MOUSE_USE_UART
|
ifeq (yes,$(strip $(SERIAL_MOUSE_USE_UART)))
|
||||||
SRC += $(PROTOCOL_DIR)/serial_uart.c
|
SRC += $(PROTOCOL_DIR)/serial_uart.c
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifdef ADB_MOUSE_ENABLE
|
ifeq (yes,$(strip $(ADB_MOUSE_ENABLE)))
|
||||||
OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE
|
OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user