SRC += host.c \ | |||||
keyboard.c \ | |||||
command.c \ | |||||
layer.c \ | |||||
timer.c \ | |||||
print.c \ | |||||
bootloader.c \ | |||||
util.c | |||||
COMMON_DIR = common | |||||
SRC += $(COMMON_DIR)/host.c \ | |||||
$(COMMON_DIR)/keyboard.c \ | |||||
$(COMMON_DIR)/command.c \ | |||||
$(COMMON_DIR)/layer.c \ | |||||
$(COMMON_DIR)/timer.c \ | |||||
$(COMMON_DIR)/print.c \ | |||||
$(COMMON_DIR)/bootloader.c \ | |||||
$(COMMON_DIR)/util.c | |||||
# Option modules | # Option modules | ||||
ifdef MOUSEKEY_ENABLE | ifdef MOUSEKEY_ENABLE | ||||
SRC += mousekey.c | |||||
SRC += $(COMMON_DIR)/mousekey.c | |||||
OPT_DEFS += -DMOUSEKEY_ENABLE | OPT_DEFS += -DMOUSEKEY_ENABLE | ||||
endif | endif | ||||
ifdef PS2_MOUSE_ENABLE | ifdef PS2_MOUSE_ENABLE | ||||
SRC += ps2.c \ | |||||
ps2_mouse.c | |||||
SRC += $(COMMON_DIR)/ps2.c \ | |||||
$(COMMON_DIR)/ps2_mouse.c | |||||
OPT_DEFS += -DPS2_MOUSE_ENABLE | OPT_DEFS += -DPS2_MOUSE_ENABLE | ||||
endif | endif | ||||
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include "bootloader.h" | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
/* Start Bootloader from Application | |||||
* See | |||||
* http://www.pjrc.com/teensy/jump_to_bootloader.html | |||||
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html | |||||
*/ | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
// TODO: support usbasp | |||||
/* Boot Section Size in bytes | |||||
* Teensy halfKay 512 | |||||
* Atmel DFU loader 4096 | |||||
* LUFA bootloader 4096 | |||||
*/ | |||||
#ifndef BOOT_SIZE | |||||
#define BOOT_SIZE 512 | |||||
#endif | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#define FLASH_SIZE (FLASHEND + 1) | |||||
#define BOOTLOADER_START (FLASHEND - BOOT_SIZE) | |||||
#include "bootloader.h" | |||||
void bootloader_jump(void) { | |||||
cli(); | |||||
// | |||||
//Teensy | |||||
// | |||||
#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) | |||||
// disable watchdog, if enabled | |||||
// disable all peripherals | |||||
UDCON = 1; | |||||
USBCON = (1<<FRZCLK); // disable USB | |||||
UCSR1B = 0; | |||||
_delay_ms(5); | |||||
#else | |||||
// This makes custom USBasploader come up. | |||||
MCUSR = 0; | |||||
#endif | |||||
#if defined(__AVR_AT90USB162__) | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0; | |||||
DDRB = 0; DDRC = 0; DDRD = 0; | |||||
PORTB = 0; PORTC = 0; PORTD = 0; | |||||
#elif defined(__AVR_ATmega32U4__) | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0; | |||||
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0; | |||||
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; | |||||
#elif defined(__AVR_AT90USB646__) | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0; | |||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; | |||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; | |||||
#elif defined(__AVR_AT90USB1286__) | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0; | |||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; | |||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; | |||||
#endif | |||||
// | |||||
//USBasp | |||||
// | |||||
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P) | |||||
// This makes custom USBasploader come up. | |||||
MCUSR = 0; | |||||
// initialize ports | |||||
PORTB = 0; PORTC= 0; PORTD = 0; | |||||
DDRB = 0; DDRC= 0; DDRD = 0; | |||||
// disable interrupts | |||||
EIMSK = 0; EECR = 0; SPCR = 0; | |||||
ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; | |||||
ADCSRA = 0; TWCR = 0; UCSR0B = 0; | |||||
#endif | |||||
void bootloader_jump(void) __attribute__ ((weak)); | |||||
void bootloader_jump(void) {} | |||||
// start Bootloader | |||||
((void (*)(void))BOOTLOADER_START)(); | |||||
} |
} | } | ||||
break; | break; | ||||
case KB_S: | case KB_S: | ||||
print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n"); | |||||
#ifdef HOST_PJRC | #ifdef HOST_PJRC | ||||
print("UDCON: "); phex(UDCON); print("\n"); | print("UDCON: "); phex(UDCON); print("\n"); | ||||
print("UDIEN: "); phex(UDIEN); print("\n"); | print("UDIEN: "); phex(UDIEN); print("\n"); |
void host_system_send(uint16_t data) | void host_system_send(uint16_t data) | ||||
{ | { | ||||
static uint16_t last_data = 0; | |||||
if (data == last_data) return; | |||||
last_data = data; | |||||
if (!driver) return; | if (!driver) return; | ||||
(*driver->send_system)(data); | (*driver->send_system)(data); | ||||
} | } | ||||
void host_consumer_send(uint16_t data) | void host_consumer_send(uint16_t data) | ||||
{ | { | ||||
// TODO: this is needed? | |||||
static uint16_t last_data = 0; | static uint16_t last_data = 0; | ||||
if (data == last_data) return; | if (data == last_data) return; | ||||
last_data = data; | last_data = data; |
uint8_t fn_bits = 0; | uint8_t fn_bits = 0; | ||||
#ifdef EXTRAKEY_ENABLE | #ifdef EXTRAKEY_ENABLE | ||||
uint16_t consumer_code = 0; | uint16_t consumer_code = 0; | ||||
uint16_t system_code = 0; | |||||
#endif | #endif | ||||
matrix_scan(); | matrix_scan(); | ||||
#ifdef HOST_PJRC | #ifdef HOST_PJRC | ||||
if (suspend && remote_wakeup) { | if (suspend && remote_wakeup) { | ||||
usb_remote_wakeup(); | usb_remote_wakeup(); | ||||
} else { | |||||
host_system_send(SYSTEM_POWER_DOWN); | |||||
} | } | ||||
#else | |||||
host_system_send(SYSTEM_POWER_DOWN); | |||||
#endif | #endif | ||||
host_system_send(0); | |||||
_delay_ms(500); | |||||
system_code = SYSTEM_POWER_DOWN; | |||||
} else if (code == KB_SYSTEM_SLEEP) { | } else if (code == KB_SYSTEM_SLEEP) { | ||||
host_system_send(SYSTEM_SLEEP); | |||||
host_system_send(0); | |||||
_delay_ms(500); | |||||
system_code = SYSTEM_SLEEP; | |||||
} else if (code == KB_SYSTEM_WAKE) { | } else if (code == KB_SYSTEM_WAKE) { | ||||
host_system_send(SYSTEM_WAKE_UP); | |||||
host_system_send(0); | |||||
_delay_ms(500); | |||||
system_code = SYSTEM_WAKE_UP; | |||||
} | } | ||||
// Consumer Page | // Consumer Page | ||||
else if (code == KB_AUDIO_MUTE) { | else if (code == KB_AUDIO_MUTE) { | ||||
host_send_keyboard_report(); | host_send_keyboard_report(); | ||||
#ifdef EXTRAKEY_ENABLE | #ifdef EXTRAKEY_ENABLE | ||||
host_consumer_send(consumer_code); | host_consumer_send(consumer_code); | ||||
host_system_send(system_code); | |||||
#endif | #endif | ||||
#ifdef DEBUG_LED | #ifdef DEBUG_LED | ||||
// LED flash for debug | // LED flash for debug |
static void mousekey_debug(void) | static void mousekey_debug(void) | ||||
{ | { | ||||
if (!debug_mouse) return; | if (!debug_mouse) return; | ||||
print("mousekey[btn|x y v h]: "); | |||||
print("mousekey [btn|x y v h]rep: ["); | |||||
phex(report.buttons); print("|"); | phex(report.buttons); print("|"); | ||||
phex(report.x); print(" "); | phex(report.x); print(" "); | ||||
phex(report.y); print(" "); | phex(report.y); print(" "); | ||||
phex(report.v); print(" "); | phex(report.v); print(" "); | ||||
phex(report.h); | |||||
phex(report.h); print("]"); | |||||
phex(mousekey_repeat); | phex(mousekey_repeat); | ||||
print("\n"); | print("\n"); | ||||
} | } |
uint8_t mods; | uint8_t mods; | ||||
uint8_t rserved; | uint8_t rserved; | ||||
uint8_t keys[REPORT_KEYS]; | uint8_t keys[REPORT_KEYS]; | ||||
} report_keyboard_t; | |||||
} __attribute__ ((packed)) report_keyboard_t; | |||||
typedef struct { | typedef struct { | ||||
uint8_t report_id; | |||||
uint8_t buttons; | uint8_t buttons; | ||||
int8_t x; | int8_t x; | ||||
int8_t y; | int8_t y; | ||||
int8_t v; | int8_t v; | ||||
int8_t h; | int8_t h; | ||||
} report_mouse_t; | |||||
} __attribute__ ((packed)) report_mouse_t; | |||||
#endif | #endif |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
adb.c | adb.c | ||||
#NKRO_ENABLE = yes # USB Nkey Rollover | #NKRO_ENABLE = yes # USB Nkey Rollover | ||||
#---------------- Programming Options -------------------------- | |||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk | ||||
include $(TOP_DIR)/common.mk | include $(TOP_DIR)/common.mk | ||||
include $(TOP_DIR)/rules.mk | include $(TOP_DIR)/rules.mk | ||||
dfu: PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex | |||||
dfu: program |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
m0110.c | m0110.c | ||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | ||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
news.c | news.c | ||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | ||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
ps2.c | ps2.c | ||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | ||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
ps2_usart.c | ps2_usart.c | ||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | ||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
ps2_usart.c | ps2_usart.c | ||||
PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) | PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) | ||||
# Boot Section Size in bytes | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBasp 2048 | |||||
OPT_DEFS += -DBOOT_SIZE=2048 | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/vusb.mk | include $(TOP_DIR)/protocol/vusb.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap_102.c \ | |||||
SRC = keymap_102.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
ps2.c | ps2.c | ||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | ||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap_122.c \ | |||||
SRC = keymap_122.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
ps2.c | ps2.c | ||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | ||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c \ | led.c \ | ||||
x68k.c | x68k.c | ||||
PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex | PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex | ||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | include $(TOP_DIR)/protocol.mk |
# Target file name (without extension). | |||||
TARGET = hbk | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# keyboard dependent files | |||||
SRC = main.c \ | |||||
keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
#MCU = at90usb162 # Teensy 1.0 | |||||
MCU = atmega32u4 # Teensy 2.0 | |||||
#MCU = at90usb646 # Teensy++ 1.0 | |||||
#MCU = at90usb1286 # Teensy++ 2.0 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#---------------- Programming Options -------------------------- | |||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start | |||||
include $(TOP_DIR)/protocol/pjrc.mk | |||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
Makefile.lufa |
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = hbkb_lufa | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
SRC += keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
# Boot Section Size in bytes | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
OPT_DEFS += -DBOOT_SIZE=4096 | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
# Target file name (without extension). | # Target file name (without extension). | ||||
TARGET = macway | |||||
TARGET = hbkb | |||||
# Directory common source filess exist | # Directory common source filess exist | ||||
TOP_DIR = ../.. | TOP_DIR = ../.. | ||||
#---------------- Programming Options -------------------------- | #---------------- Programming Options -------------------------- | ||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start | |||||
#define VENDOR_ID 0xFEED | #define VENDOR_ID 0xFEED | ||||
#define PRODUCT_ID 0xBB00 | #define PRODUCT_ID 0xBB00 | ||||
#define MANUFACTURER t.m.k. | #define MANUFACTURER t.m.k. | ||||
#define DEVICE_VER 0x0100 | |||||
#define PRODUCT Happy Buckling Keyboard | #define PRODUCT Happy Buckling Keyboard | ||||
#define DESCRIPTION mod version of IBM Model M keyboard | #define DESCRIPTION mod version of IBM Model M keyboard | ||||
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = hhkb_lufa | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
SRC += keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
MCU = at90usb1286 | |||||
#MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
# Boot Section Size in bytes | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
#OPT_DEFS += -DBOOT_SIZE=4096 | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c | led.c | ||||
CONFIG_H = config_pjrc.h | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | # MCU name, you MUST set this to match the board you are using | ||||
# Search Path | # Search Path | ||||
VPATH = $(TARGET_DIR) | VPATH = $(TARGET_DIR) | ||||
VPATH = $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | include $(TOP_DIR)/common.mk | ||||
include $(TOP_DIR)/rules.mk | include $(TOP_DIR)/rules.mk |
/* controller configuration */ | /* controller configuration */ | ||||
#include "controller_teensy.h" | #include "controller_teensy.h" | ||||
#define VENDOR_ID 0xFEED | #define VENDOR_ID 0xFEED | ||||
#define PRODUCT_ID 0xCAFE | |||||
#define PRODUCT_ID 0xCAFF | |||||
#define DEVICE_VER 0x0101 | #define DEVICE_VER 0x0101 | ||||
#define MANUFACTURER t.m.k. | #define MANUFACTURER t.m.k. | ||||
#define PRODUCT HHKB mod | #define PRODUCT HHKB mod | ||||
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod | #define DESCRIPTION t.m.k. keyboard firmware for HHKB mod | ||||
* |Gui |Alt |Space |Alt |xxx| | * |Gui |Alt |Space |Alt |xxx| | ||||
* `--------------------------------------------' | * `--------------------------------------------' | ||||
*/ | */ | ||||
KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \ | CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \ | ||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | ||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ | LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ |
// key: on: 0/off: 1 | // key: on: 0/off: 1 | ||||
// prev: unknown: output previous key state(negated)? | // prev: unknown: output previous key state(negated)? | ||||
#ifdef HOST_PJRC | |||||
// Ports for Teensy | |||||
#if defined(__AVR_AT90USB1286__) | |||||
// Ports for Teensy++ | |||||
// row: PB0-2 | // row: PB0-2 | ||||
// col: PB3-5,6 | // col: PB3-5,6 | ||||
// key: PE6(pull-uped) | // key: PE6(pull-uped) | ||||
#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) | #define KEY_PREV_OFF() (PORTE &= ~(1<<7)) | ||||
#define KEY_POWER_ON() | #define KEY_POWER_ON() | ||||
#define KEY_POWER_OFF() | #define KEY_POWER_OFF() | ||||
#else | |||||
#elif defined(__AVR_ATmega328P__) | |||||
// Ports for V-USB | // Ports for V-USB | ||||
// key: PB0(pull-uped) | // key: PB0(pull-uped) | ||||
// prev: PB1 | // prev: PB1 | ||||
DDRC &= ~0x0F; \ | DDRC &= ~0x0F; \ | ||||
PORTC &= ~0x0F; \ | PORTC &= ~0x0F; \ | ||||
} while (0) | } while (0) | ||||
#else | |||||
# error "define code for matrix scan" | |||||
#endif | #endif | ||||
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = macway_lufa | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
SRC += keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
# Boot Section Size in bytes | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
#OPT_DEFS += -DBOOT_SIZE=4096 | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = macway_pjrc | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# keyboard dependent files | |||||
SRC = keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
#MCU = at90usb162 # Teensy 1.0 | |||||
MCU = atmega32u4 # Teensy 2.0 | |||||
#MCU = at90usb646 # Teensy++ 1.0 | |||||
#MCU = at90usb1286 # Teensy++ 2.0 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#---------------- Programming Options -------------------------- | |||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
/* controller configuration */ | /* controller configuration */ | ||||
#include "controller_teensy.h" | #include "controller_teensy.h" | ||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | #define VENDOR_ID 0xFEED | ||||
#define PRODUCT_ID 0xBEE0 | #define PRODUCT_ID 0xBEE0 | ||||
#define DEVICE_VER 0x0202 | |||||
#define MANUFACTURER t.m.k. | #define MANUFACTURER t.m.k. | ||||
#define PRODUCT Macway mod | #define PRODUCT Macway mod | ||||
/* message strings */ | |||||
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod | #define DESCRIPTION t.m.k. keyboard firmware for Macway mod | ||||
3, // Fn3 | 3, // Fn3 | ||||
4, // Fn4 | 4, // Fn4 | ||||
0, // Fn5 | 0, // Fn5 | ||||
2, // Fn6 | |||||
3, // Fn6 | |||||
3 // Fn7 | 3 // Fn7 | ||||
}; | }; | ||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ | TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ | ||||
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \ | LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \ | ||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ | LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ | ||||
FN7, LGUI,LALT,FN4, RALT,BSLS,GRV, FN6, RCTL), | |||||
FN7, LGUI,LALT,FN4, RALT,GRV, FN6, FN6, RCTL), | |||||
/* Layer 1: HHKB mode (HHKB Fn) | /* Layer 1: HHKB mode (HHKB Fn) | ||||
* | |Gui |Alt | |Alt |Gui| | |Ctr| | * | |Gui |Alt | |Alt |Gui| | |Ctr| | ||||
* `-----------------------------------------------------------' | * `-----------------------------------------------------------' | ||||
*/ | */ | ||||
KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \ | |||||
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NLCK,\ | |||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | ||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ | LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ | ||||
NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL), | NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL), | ||||
BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ | BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ | ||||
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ | LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ | ||||
LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ | LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ | ||||
FN7, LGUI,LALT,BTN1,RALT,NO, NO, NO, NO), | |||||
FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO), | |||||
/* Layer 4: Matias half keyboard style (Space) | /* Layer 4: Matias half keyboard style (Space) |
LUFA_DIR = protocol/lufa | |||||
# Path to the LUFA library | |||||
LUFA_PATH = $(TOP_DIR)/protocol/lufa/LUFA-120219 | |||||
# Create the LUFA source path variables by including the LUFA root makefile | |||||
include $(LUFA_PATH)/LUFA/makefile | |||||
LUFA_SRC = $(LUFA_DIR)/lufa.c \ | |||||
$(LUFA_DIR)/descriptor.c \ | |||||
$(LUFA_SRC_USB) | |||||
SRC += $(subst $(LUFA_PATH)/,,$(LUFA_SRC)) | |||||
# Search Path | |||||
VPATH += $(LUFA_PATH) | |||||
# Option modules | |||||
#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||||
#endif | |||||
#ifdef EXTRAKEY_ENABLE | |||||
#endif | |||||
# LUFA library compile-time options and predefined tokens | |||||
LUFA_OPTS = -D USB_DEVICE_ONLY | |||||
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 | |||||
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 | |||||
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS | |||||
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" | |||||
OPT_DEFS += -DF_USB=$(F_USB)UL | |||||
OPT_DEFS += -DARCH=ARCH_$(ARCH) | |||||
OPT_DEFS += $(LUFA_OPTS) | |||||
OPT_DEFS += -DHOST_LUFA |
/* | |||||
* Copyright 2012 Jun Wako <[email protected]> | |||||
* This file is based on: | |||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse | |||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID | |||||
*/ | |||||
/* | |||||
LUFA Library | |||||
Copyright (C) Dean Camera, 2012. | |||||
dean [at] fourwalledcubicle [dot] com | |||||
www.lufa-lib.org | |||||
*/ | |||||
/* | |||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) | |||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) | |||||
Permission to use, copy, modify, distribute, and sell this | |||||
software and its documentation for any purpose is hereby granted | |||||
without fee, provided that the above copyright notice appear in | |||||
all copies and that both that the copyright notice and this | |||||
permission notice and warranty disclaimer appear in supporting | |||||
documentation, and that the name of the author not be used in | |||||
advertising or publicity pertaining to distribution of the | |||||
software without specific, written prior permission. | |||||
The author disclaim all warranties with regard to this | |||||
software, including all implied warranties of merchantability | |||||
and fitness. In no event shall the author be liable for any | |||||
special, indirect or consequential damages or any damages | |||||
whatsoever resulting from loss of use, data or profits, whether | |||||
in an action of contract, negligence or other tortious action, | |||||
arising out of or in connection with the use or performance of | |||||
this software. | |||||
*/ | |||||
#include "util.h" | |||||
#include "report.h" | |||||
#include "descriptor.h" | |||||
/******************************************************************************* | |||||
* HID Report Descriptors | |||||
******************************************************************************/ | |||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = | |||||
{ | |||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ | |||||
HID_RI_USAGE(8, 0x06), /* Keyboard */ | |||||
HID_RI_COLLECTION(8, 0x01), /* Application */ | |||||
HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */ | |||||
HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */ | |||||
HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */ | |||||
HID_RI_LOGICAL_MINIMUM(8, 0x00), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01), | |||||
HID_RI_REPORT_COUNT(8, 0x08), | |||||
HID_RI_REPORT_SIZE(8, 0x01), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), | |||||
HID_RI_REPORT_COUNT(8, 0x01), | |||||
HID_RI_REPORT_SIZE(8, 0x08), | |||||
HID_RI_INPUT(8, HID_IOF_CONSTANT), | |||||
HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */ | |||||
HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */ | |||||
HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */ | |||||
HID_RI_REPORT_COUNT(8, 0x05), | |||||
HID_RI_REPORT_SIZE(8, 0x01), | |||||
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), | |||||
HID_RI_REPORT_COUNT(8, 0x01), | |||||
HID_RI_REPORT_SIZE(8, 0x03), | |||||
HID_RI_OUTPUT(8, HID_IOF_CONSTANT), | |||||
HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */ | |||||
HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */ | |||||
HID_RI_USAGE_MAXIMUM(8, 0xFF), /* Keyboard Application */ | |||||
HID_RI_LOGICAL_MINIMUM(8, 0x00), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 0xFF), | |||||
HID_RI_REPORT_COUNT(8, 0x06), | |||||
HID_RI_REPORT_SIZE(8, 0x08), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), | |||||
HID_RI_END_COLLECTION(0), | |||||
}; | |||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = | |||||
{ | |||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ | |||||
HID_RI_USAGE(8, 0x02), /* Mouse */ | |||||
HID_RI_COLLECTION(8, 0x01), /* Application */ | |||||
HID_RI_USAGE(8, 0x01), /* Pointer */ | |||||
HID_RI_COLLECTION(8, 0x00), /* Physical */ | |||||
HID_RI_USAGE_PAGE(8, 0x09), /* Button */ | |||||
HID_RI_USAGE_MINIMUM(8, 0x01), /* Button 1 */ | |||||
HID_RI_USAGE_MAXIMUM(8, 0x05), /* Button 5 */ | |||||
HID_RI_LOGICAL_MINIMUM(8, 0x00), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01), | |||||
HID_RI_REPORT_COUNT(8, 0x05), | |||||
HID_RI_REPORT_SIZE(8, 0x01), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), | |||||
HID_RI_REPORT_COUNT(8, 0x01), | |||||
HID_RI_REPORT_SIZE(8, 0x03), | |||||
HID_RI_INPUT(8, HID_IOF_CONSTANT), | |||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ | |||||
HID_RI_USAGE(8, 0x30), /* Usage X */ | |||||
HID_RI_USAGE(8, 0x31), /* Usage Y */ | |||||
HID_RI_LOGICAL_MINIMUM(8, -127), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 127), | |||||
HID_RI_REPORT_COUNT(8, 0x02), | |||||
HID_RI_REPORT_SIZE(8, 0x08), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE), | |||||
HID_RI_USAGE(8, 0x38), /* Wheel */ | |||||
HID_RI_LOGICAL_MINIMUM(8, -127), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 127), | |||||
HID_RI_REPORT_COUNT(8, 0x01), | |||||
HID_RI_REPORT_SIZE(8, 0x08), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE), | |||||
HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */ | |||||
HID_RI_USAGE(16, 0x0238), /* AC Pan (Horizontal wheel) */ | |||||
HID_RI_LOGICAL_MINIMUM(8, -127), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 127), | |||||
HID_RI_REPORT_COUNT(8, 0x01), | |||||
HID_RI_REPORT_SIZE(8, 0x08), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE), | |||||
HID_RI_END_COLLECTION(0), | |||||
HID_RI_END_COLLECTION(0), | |||||
}; | |||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM ConsoleReport[] = | |||||
{ | |||||
HID_RI_USAGE_PAGE(16, 0xFF31), /* Vendor Page(PJRC Teensy compatible) */ | |||||
HID_RI_USAGE(8, 0x74), /* Vendor Usage(PJRC Teensy compatible) */ | |||||
HID_RI_COLLECTION(8, 0x01), /* Application */ | |||||
HID_RI_USAGE(8, 0x75), /* Vendor Usage 0x75 */ | |||||
HID_RI_LOGICAL_MINIMUM(8, 0x00), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 0xFF), | |||||
HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE), | |||||
HID_RI_REPORT_SIZE(8, 0x08), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), | |||||
HID_RI_USAGE(8, 0x76), /* Vendor Usage 0x76 */ | |||||
HID_RI_LOGICAL_MINIMUM(8, 0x00), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 0xFF), | |||||
HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE), | |||||
HID_RI_REPORT_SIZE(8, 0x08), | |||||
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), | |||||
HID_RI_END_COLLECTION(0), | |||||
}; | |||||
#ifdef EXTRAKEY_ENABLE | |||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtraReport[] = | |||||
{ | |||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ | |||||
HID_RI_USAGE(8, 0x80), /* System Control */ | |||||
HID_RI_COLLECTION(8, 0x01), /* Application */ | |||||
HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM), | |||||
HID_RI_LOGICAL_MINIMUM(16, 0x0081), | |||||
HID_RI_LOGICAL_MAXIMUM(16, 0x00B7), | |||||
HID_RI_USAGE_MINIMUM(16, 0x0081), /* System Power Down */ | |||||
HID_RI_USAGE_MAXIMUM(16, 0x00B7), /* System Display LCD Autoscale */ | |||||
HID_RI_REPORT_SIZE(8, 16), | |||||
HID_RI_REPORT_COUNT(8, 1), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), | |||||
HID_RI_END_COLLECTION(0), | |||||
HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */ | |||||
HID_RI_USAGE(8, 0x01), /* Consumer Control */ | |||||
HID_RI_COLLECTION(8, 0x01), /* Application */ | |||||
HID_RI_REPORT_ID(8, REPORT_ID_CONSUMER), | |||||
HID_RI_LOGICAL_MINIMUM(16, 0x0010), | |||||
HID_RI_LOGICAL_MAXIMUM(16, 0x029C), | |||||
HID_RI_USAGE_MINIMUM(16, 0x0010), /* +10 */ | |||||
HID_RI_USAGE_MAXIMUM(16, 0x029C), /* AC Distribute Vertically */ | |||||
HID_RI_REPORT_SIZE(8, 16), | |||||
HID_RI_REPORT_COUNT(8, 1), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), | |||||
HID_RI_END_COLLECTION(0), | |||||
}; | |||||
#endif | |||||
#ifdef NKRO_ENABLE | |||||
const USB_Descriptor_HIDReport_Datatype_t PROGMEM NKROReport[] = | |||||
{ | |||||
HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ | |||||
HID_RI_USAGE(8, 0x06), /* Keyboard */ | |||||
HID_RI_COLLECTION(8, 0x01), /* Application */ | |||||
HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */ | |||||
HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */ | |||||
HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */ | |||||
HID_RI_LOGICAL_MINIMUM(8, 0x00), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01), | |||||
HID_RI_REPORT_COUNT(8, 0x08), | |||||
HID_RI_REPORT_SIZE(8, 0x01), | |||||
HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), | |||||
HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */ | |||||
HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */ | |||||
HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */ | |||||
HID_RI_REPORT_COUNT(8, 0x05), | |||||
HID_RI_REPORT_SIZE(8, 0x01), | |||||
HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), | |||||
HID_RI_REPORT_COUNT(8, 0x01), | |||||
HID_RI_REPORT_SIZE(8, 0x03), | |||||
HID_RI_OUTPUT(8, HID_IOF_CONSTANT), | |||||
HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */ | |||||
HID_RI_USAGE_MINIMUM(8, 0x00), /* Keyboard 0 */ | |||||
HID_RI_USAGE_MAXIMUM(8, NKRO_SIZE*8-1), /* Keyboard Right GUI */ | |||||
HID_RI_LOGICAL_MINIMUM(8, 0x00), | |||||
HID_RI_LOGICAL_MAXIMUM(8, 0x01), | |||||
HID_RI_REPORT_COUNT(8, NKRO_SIZE*8), | |||||
HID_RI_REPORT_SIZE(8, 0x01), | |||||
}; | |||||
#endif | |||||
/******************************************************************************* | |||||
* Device Descriptors | |||||
******************************************************************************/ | |||||
const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, | |||||
.USBSpecification = VERSION_BCD(01.10), | |||||
.Class = USB_CSCP_NoDeviceClass, | |||||
.SubClass = USB_CSCP_NoDeviceSubclass, | |||||
.Protocol = USB_CSCP_NoDeviceProtocol, | |||||
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, | |||||
.VendorID = VENDOR_ID, | |||||
.ProductID = PRODUCT_ID, | |||||
.ReleaseNumber = DEVICE_VER, | |||||
.ManufacturerStrIndex = 0x01, | |||||
.ProductStrIndex = 0x02, | |||||
.SerialNumStrIndex = NO_DESCRIPTOR, | |||||
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS | |||||
}; | |||||
/******************************************************************************* | |||||
* Configuration Descriptors | |||||
******************************************************************************/ | |||||
const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = | |||||
{ | |||||
.Config = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, | |||||
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), | |||||
.TotalInterfaces = TOTAL_INTERFACES, | |||||
.ConfigurationNumber = 1, | |||||
.ConfigurationStrIndex = NO_DESCRIPTOR, | |||||
.ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_REMOTEWAKEUP), | |||||
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100) | |||||
}, | |||||
/* | |||||
* Keyboard | |||||
*/ | |||||
.Keyboard_Interface = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, | |||||
.InterfaceNumber = KEYBOARD_INTERFACE, | |||||
.AlternateSetting = 0x00, | |||||
.TotalEndpoints = 1, | |||||
.Class = HID_CSCP_HIDClass, | |||||
.SubClass = HID_CSCP_BootSubclass, | |||||
.Protocol = HID_CSCP_KeyboardBootProtocol, | |||||
.InterfaceStrIndex = NO_DESCRIPTOR | |||||
}, | |||||
.Keyboard_HID = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, | |||||
.HIDSpec = VERSION_BCD(01.11), | |||||
.CountryCode = 0x00, | |||||
.TotalReportDescriptors = 1, | |||||
.HIDReportType = HID_DTYPE_Report, | |||||
.HIDReportLength = sizeof(KeyboardReport) | |||||
}, | |||||
.Keyboard_INEndpoint = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, | |||||
.EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), | |||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), | |||||
.EndpointSize = KEYBOARD_EPSIZE, | |||||
.PollingIntervalMS = 0x01 | |||||
}, | |||||
/* | |||||
* Mouse | |||||
*/ | |||||
#ifdef MOUSE_ENABLE | |||||
.Mouse_Interface = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, | |||||
.InterfaceNumber = MOUSE_INTERFACE, | |||||
.AlternateSetting = 0x00, | |||||
.TotalEndpoints = 1, | |||||
.Class = HID_CSCP_HIDClass, | |||||
.SubClass = HID_CSCP_BootSubclass, | |||||
.Protocol = HID_CSCP_MouseBootProtocol, | |||||
.InterfaceStrIndex = NO_DESCRIPTOR | |||||
}, | |||||
.Mouse_HID = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, | |||||
.HIDSpec = VERSION_BCD(01.11), | |||||
.CountryCode = 0x00, | |||||
.TotalReportDescriptors = 1, | |||||
.HIDReportType = HID_DTYPE_Report, | |||||
.HIDReportLength = sizeof(MouseReport) | |||||
}, | |||||
.Mouse_INEndpoint = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, | |||||
.EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM), | |||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), | |||||
.EndpointSize = MOUSE_EPSIZE, | |||||
.PollingIntervalMS = 0x01 | |||||
}, | |||||
#endif | |||||
/* | |||||
* Console | |||||
*/ | |||||
.Console_Interface = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, | |||||
.InterfaceNumber = CONSOLE_INTERFACE, | |||||
.AlternateSetting = 0x00, | |||||
.TotalEndpoints = 2, | |||||
.Class = HID_CSCP_HIDClass, | |||||
.SubClass = HID_CSCP_NonBootSubclass, | |||||
.Protocol = HID_CSCP_NonBootProtocol, | |||||
.InterfaceStrIndex = NO_DESCRIPTOR | |||||
}, | |||||
.Console_HID = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, | |||||
.HIDSpec = VERSION_BCD(01.11), | |||||
.CountryCode = 0x00, | |||||
.TotalReportDescriptors = 1, | |||||
.HIDReportType = HID_DTYPE_Report, | |||||
.HIDReportLength = sizeof(ConsoleReport) | |||||
}, | |||||
.Console_INEndpoint = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, | |||||
.EndpointAddress = (ENDPOINT_DIR_IN | CONSOLE_IN_EPNUM), | |||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), | |||||
.EndpointSize = CONSOLE_EPSIZE, | |||||
.PollingIntervalMS = 0x01 | |||||
}, | |||||
.Console_OUTEndpoint = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, | |||||
.EndpointAddress = (ENDPOINT_DIR_OUT | CONSOLE_OUT_EPNUM), | |||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), | |||||
.EndpointSize = CONSOLE_EPSIZE, | |||||
.PollingIntervalMS = 0x01 | |||||
}, | |||||
/* | |||||
* Extra | |||||
*/ | |||||
#ifdef EXTRAKEY_ENABLE | |||||
.Extra_Interface = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, | |||||
.InterfaceNumber = EXTRA_INTERFACE, | |||||
.AlternateSetting = 0x00, | |||||
.TotalEndpoints = 1, | |||||
.Class = HID_CSCP_HIDClass, | |||||
.SubClass = HID_CSCP_NonBootSubclass, | |||||
.Protocol = HID_CSCP_NonBootProtocol, | |||||
.InterfaceStrIndex = NO_DESCRIPTOR | |||||
}, | |||||
.Extra_HID = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, | |||||
.HIDSpec = VERSION_BCD(01.11), | |||||
.CountryCode = 0x00, | |||||
.TotalReportDescriptors = 1, | |||||
.HIDReportType = HID_DTYPE_Report, | |||||
.HIDReportLength = sizeof(ExtraReport) | |||||
}, | |||||
.Extra_INEndpoint = | |||||
{ | |||||
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, | |||||
.EndpointAddress = (ENDPOINT_DIR_IN | EXTRA_IN_EPNUM), | |||||
.Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), | |||||
.EndpointSize = EXTRA_EPSIZE, | |||||
.PollingIntervalMS = 0x01 | |||||
}, | |||||
#endif | |||||
}; | |||||
/******************************************************************************* | |||||
* String Descriptors | |||||
******************************************************************************/ | |||||
const USB_Descriptor_String_t PROGMEM LanguageString = | |||||
{ | |||||
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, | |||||
.UnicodeString = {LANGUAGE_ID_ENG} | |||||
}; | |||||
const USB_Descriptor_String_t PROGMEM ManufacturerString = | |||||
{ | |||||
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, | |||||
.UnicodeString = LSTR(MANUFACTURER) | |||||
}; | |||||
const USB_Descriptor_String_t PROGMEM ProductString = | |||||
{ | |||||
.Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String}, | |||||
.UnicodeString = LSTR(PRODUCT) | |||||
}; | |||||
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" | |||||
* documentation) by the application code so that the address and size of a requested descriptor can be given | |||||
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function | |||||
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the | |||||
* USB host. | |||||
*/ | |||||
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, | |||||
const uint8_t wIndex, | |||||
const void** const DescriptorAddress) | |||||
{ | |||||
const uint8_t DescriptorType = (wValue >> 8); | |||||
const uint8_t DescriptorIndex = (wValue & 0xFF); | |||||
const void* Address = NULL; | |||||
uint16_t Size = NO_DESCRIPTOR; | |||||
switch (DescriptorType) | |||||
{ | |||||
case DTYPE_Device: | |||||
Address = &DeviceDescriptor; | |||||
Size = sizeof(USB_Descriptor_Device_t); | |||||
break; | |||||
case DTYPE_Configuration: | |||||
Address = &ConfigurationDescriptor; | |||||
Size = sizeof(USB_Descriptor_Configuration_t); | |||||
break; | |||||
case DTYPE_String: | |||||
switch (DescriptorIndex ) | |||||
{ | |||||
case 0x00: | |||||
Address = &LanguageString; | |||||
Size = pgm_read_byte(&LanguageString.Header.Size); | |||||
break; | |||||
case 0x01: | |||||
Address = &ManufacturerString; | |||||
Size = pgm_read_byte(&ManufacturerString.Header.Size); | |||||
break; | |||||
case 0x02: | |||||
Address = &ProductString; | |||||
Size = pgm_read_byte(&ProductString.Header.Size); | |||||
break; | |||||
} | |||||
break; | |||||
case HID_DTYPE_HID: | |||||
switch (wIndex) { | |||||
case KEYBOARD_INTERFACE: | |||||
Address = &ConfigurationDescriptor.Keyboard_HID; | |||||
Size = sizeof(USB_HID_Descriptor_HID_t); | |||||
break; | |||||
#ifdef MOUSE_ENABLE | |||||
case MOUSE_INTERFACE: | |||||
Address = &ConfigurationDescriptor.Mouse_HID; | |||||
Size = sizeof(USB_HID_Descriptor_HID_t); | |||||
break; | |||||
#endif | |||||
case CONSOLE_INTERFACE: | |||||
Address = &ConfigurationDescriptor.Console_HID; | |||||
Size = sizeof(USB_HID_Descriptor_HID_t); | |||||
break; | |||||
#ifdef EXTRAKEY_ENABLE | |||||
case EXTRA_INTERFACE: | |||||
Address = &ConfigurationDescriptor.Extra_HID; | |||||
Size = sizeof(USB_HID_Descriptor_HID_t); | |||||
break; | |||||
#endif | |||||
} | |||||
break; | |||||
case HID_DTYPE_Report: | |||||
switch (wIndex) { | |||||
case KEYBOARD_INTERFACE: | |||||
Address = &KeyboardReport; | |||||
Size = sizeof(KeyboardReport); | |||||
break; | |||||
#ifdef MOUSE_ENABLE | |||||
case MOUSE_INTERFACE: | |||||
Address = &MouseReport; | |||||
Size = sizeof(MouseReport); | |||||
break; | |||||
#endif | |||||
case CONSOLE_INTERFACE: | |||||
Address = &ConsoleReport; | |||||
Size = sizeof(ConsoleReport); | |||||
break; | |||||
#ifdef EXTRAKEY_ENABLE | |||||
case EXTRA_INTERFACE: | |||||
Address = &ExtraReport; | |||||
Size = sizeof(ExtraReport); | |||||
break; | |||||
#endif | |||||
} | |||||
break; | |||||
} | |||||
*DescriptorAddress = Address; | |||||
return Size; | |||||
} |
/* | |||||
* Copyright 2012 Jun Wako <[email protected]> | |||||
* This file is based on: | |||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse | |||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID | |||||
*/ | |||||
/* | |||||
LUFA Library | |||||
Copyright (C) Dean Camera, 2012. | |||||
dean [at] fourwalledcubicle [dot] com | |||||
www.lufa-lib.org | |||||
*/ | |||||
/* | |||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) | |||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) | |||||
Permission to use, copy, modify, distribute, and sell this | |||||
software and its documentation for any purpose is hereby granted | |||||
without fee, provided that the above copyright notice appear in | |||||
all copies and that both that the copyright notice and this | |||||
permission notice and warranty disclaimer appear in supporting | |||||
documentation, and that the name of the author not be used in | |||||
advertising or publicity pertaining to distribution of the | |||||
software without specific, written prior permission. | |||||
The author disclaim all warranties with regard to this | |||||
software, including all implied warranties of merchantability | |||||
and fitness. In no event shall the author be liable for any | |||||
special, indirect or consequential damages or any damages | |||||
whatsoever resulting from loss of use, data or profits, whether | |||||
in an action of contract, negligence or other tortious action, | |||||
arising out of or in connection with the use or performance of | |||||
this software. | |||||
*/ | |||||
/** \file | |||||
* | |||||
* Header file for Descriptors.c. | |||||
*/ | |||||
#ifndef _DESCRIPTORS_H_ | |||||
#define _DESCRIPTORS_H_ | |||||
#include <LUFA/Drivers/USB/USB.h> | |||||
#include <avr/pgmspace.h> | |||||
typedef struct | |||||
{ | |||||
USB_Descriptor_Configuration_Header_t Config; | |||||
// Keyboard HID Interface | |||||
USB_Descriptor_Interface_t Keyboard_Interface; | |||||
USB_HID_Descriptor_HID_t Keyboard_HID; | |||||
USB_Descriptor_Endpoint_t Keyboard_INEndpoint; | |||||
// Mouse HID Interface | |||||
#ifdef MOUSE_ENABLE | |||||
USB_Descriptor_Interface_t Mouse_Interface; | |||||
USB_HID_Descriptor_HID_t Mouse_HID; | |||||
USB_Descriptor_Endpoint_t Mouse_INEndpoint; | |||||
#endif | |||||
// Console HID Interface | |||||
USB_Descriptor_Interface_t Console_Interface; | |||||
USB_HID_Descriptor_HID_t Console_HID; | |||||
USB_Descriptor_Endpoint_t Console_INEndpoint; | |||||
USB_Descriptor_Endpoint_t Console_OUTEndpoint; | |||||
// Extra HID Interface | |||||
#ifdef EXTRAKEY_ENABLE | |||||
USB_Descriptor_Interface_t Extra_Interface; | |||||
USB_HID_Descriptor_HID_t Extra_HID; | |||||
USB_Descriptor_Endpoint_t Extra_INEndpoint; | |||||
#endif | |||||
} USB_Descriptor_Configuration_t; | |||||
/* index of interface */ | |||||
#define KEYBOARD_INTERFACE 0 | |||||
#ifdef MOUSE_ENABLE | |||||
# define MOUSE_INTERFACE (KEYBOARD_INTERFACE + 1) | |||||
#else | |||||
# define MOUSE_INTERFACE KEYBOARD_INTERFACE | |||||
#endif | |||||
#ifdef EXTRAKEY_ENABLE | |||||
# define EXTRA_INTERFACE (MOUSE_INTERFACE + 1) | |||||
#else | |||||
# define EXTRA_INTERFACE MOUSE_INTERFACE | |||||
#endif | |||||
#define CONSOLE_INTERFACE (EXTRA_INTERFACE + 1) | |||||
/* nubmer of interfaces */ | |||||
#define TOTAL_INTERFACES (CONSOLE_INTERFACE + 1) | |||||
// Endopoint number and size | |||||
#define KEYBOARD_IN_EPNUM 1 | |||||
#define MOUSE_IN_EPNUM 2 | |||||
#define CONSOLE_IN_EPNUM 3 | |||||
#define CONSOLE_OUT_EPNUM 4 | |||||
#define EXTRA_IN_EPNUM 5 | |||||
#define KEYBOARD_EPSIZE 8 | |||||
#define MOUSE_EPSIZE 8 | |||||
#define CONSOLE_EPSIZE 8 | |||||
#define EXTRA_EPSIZE 8 | |||||
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, | |||||
const uint8_t wIndex, | |||||
const void** const DescriptorAddress) | |||||
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); | |||||
#endif |
/* | |||||
* Copyright 2012 Jun Wako <[email protected]> | |||||
* This file is based on: | |||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse | |||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID | |||||
*/ | |||||
/* | |||||
LUFA Library | |||||
Copyright (C) Dean Camera, 2012. | |||||
dean [at] fourwalledcubicle [dot] com | |||||
www.lufa-lib.org | |||||
*/ | |||||
/* | |||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) | |||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) | |||||
Permission to use, copy, modify, distribute, and sell this | |||||
software and its documentation for any purpose is hereby granted | |||||
without fee, provided that the above copyright notice appear in | |||||
all copies and that both that the copyright notice and this | |||||
permission notice and warranty disclaimer appear in supporting | |||||
documentation, and that the name of the author not be used in | |||||
advertising or publicity pertaining to distribution of the | |||||
software without specific, written prior permission. | |||||
The author disclaim all warranties with regard to this | |||||
software, including all implied warranties of merchantability | |||||
and fitness. In no event shall the author be liable for any | |||||
special, indirect or consequential damages or any damages | |||||
whatsoever resulting from loss of use, data or profits, whether | |||||
in an action of contract, negligence or other tortious action, | |||||
arising out of or in connection with the use or performance of | |||||
this software. | |||||
*/ | |||||
#include "report.h" | |||||
#include "host.h" | |||||
#include "host_driver.h" | |||||
#include "keyboard.h" | |||||
#include "sendchar.h" | |||||
#include "debug.h" | |||||
#include "descriptor.h" | |||||
#include "lufa.h" | |||||
static uint8_t idle_duration = 0; | |||||
static uint8_t protocol_report = 1; | |||||
static uint8_t keyboard_led_stats = 0; | |||||
static report_keyboard_t keyboard_report_sent; | |||||
/* Host driver */ | |||||
static uint8_t keyboard_leds(void); | |||||
static void send_keyboard(report_keyboard_t *report); | |||||
static void send_mouse(report_mouse_t *report); | |||||
static void send_system(uint16_t data); | |||||
static void send_consumer(uint16_t data); | |||||
static host_driver_t lufa_driver = { | |||||
keyboard_leds, | |||||
send_keyboard, | |||||
send_mouse, | |||||
send_system, | |||||
send_consumer | |||||
}; | |||||
static void SetupHardware(void); | |||||
static void Console_HID_Task(void); | |||||
int main(void) | |||||
{ | |||||
SetupHardware(); | |||||
sei(); | |||||
print_enable = true; | |||||
debug_enable = true; | |||||
debug_matrix = true; | |||||
debug_keyboard = true; | |||||
debug_mouse = true; | |||||
// TODO: can't print here | |||||
debug("LUFA init\n"); | |||||
keyboard_init(); | |||||
host_set_driver(&lufa_driver); | |||||
while (1) { | |||||
keyboard_proc(); | |||||
Console_HID_Task(); | |||||
USB_USBTask(); | |||||
} | |||||
} | |||||
void SetupHardware(void) | |||||
{ | |||||
/* Disable watchdog if enabled by bootloader/fuses */ | |||||
MCUSR &= ~(1 << WDRF); | |||||
wdt_disable(); | |||||
/* Disable clock division */ | |||||
clock_prescale_set(clock_div_1); | |||||
USB_Init(); | |||||
} | |||||
static void Console_HID_Task(void) | |||||
{ | |||||
/* Device must be connected and configured for the task to run */ | |||||
if (USB_DeviceState != DEVICE_STATE_Configured) | |||||
return; | |||||
// TODO: impl receivechar()/recvchar() | |||||
Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM); | |||||
/* Check to see if a packet has been sent from the host */ | |||||
if (Endpoint_IsOUTReceived()) | |||||
{ | |||||
/* Check to see if the packet contains data */ | |||||
if (Endpoint_IsReadWriteAllowed()) | |||||
{ | |||||
/* Create a temporary buffer to hold the read in report from the host */ | |||||
uint8_t ConsoleData[CONSOLE_EPSIZE]; | |||||
/* Read Console Report Data */ | |||||
Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL); | |||||
/* Process Console Report Data */ | |||||
//ProcessConsoleHIDReport(ConsoleData); | |||||
} | |||||
/* Finalize the stream transfer to send the last packet */ | |||||
Endpoint_ClearOUT(); | |||||
} | |||||
/* IN packet */ | |||||
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); | |||||
// send IN packet | |||||
if (Endpoint_IsINReady()) | |||||
Endpoint_ClearIN(); | |||||
} | |||||
/******************************************************************************* | |||||
* USB Events | |||||
******************************************************************************/ | |||||
/** Event handler for the USB_Connect event. */ | |||||
void EVENT_USB_Device_Connect(void) | |||||
{ | |||||
} | |||||
/** Event handler for the USB_Disconnect event. */ | |||||
void EVENT_USB_Device_Disconnect(void) | |||||
{ | |||||
} | |||||
/** Event handler for the USB_ConfigurationChanged event. | |||||
* This is fired when the host sets the current configuration of the USB device after enumeration. | |||||
*/ | |||||
void EVENT_USB_Device_ConfigurationChanged(void) | |||||
{ | |||||
bool ConfigSuccess = true; | |||||
/* Setup Keyboard HID Report Endpoints */ | |||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, | |||||
KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE); | |||||
#ifdef MOUSE_ENABLE | |||||
/* Setup Mouse HID Report Endpoint */ | |||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, | |||||
MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE); | |||||
#endif | |||||
#ifdef EXTRAKEY_ENABLE | |||||
/* Setup Extra HID Report Endpoint */ | |||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(EXTRA_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, | |||||
EXTRA_EPSIZE, ENDPOINT_BANK_SINGLE); | |||||
#endif | |||||
/* Setup Console HID Report Endpoints */ | |||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, | |||||
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE); | |||||
ConfigSuccess &= Endpoint_ConfigureEndpoint(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, | |||||
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE); | |||||
} | |||||
/* | |||||
Appendix G: HID Request Support Requirements | |||||
The following table enumerates the requests that need to be supported by various types of HID class devices. | |||||
Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol | |||||
------------------------------------------------------------------------------------------ | |||||
Boot Mouse Required Optional Optional Optional Required Required | |||||
Non-Boot Mouse Required Optional Optional Optional Optional Optional | |||||
Boot Keyboard Required Optional Required Required Required Required | |||||
Non-Boot Keybrd Required Optional Required Required Optional Optional | |||||
Other Device Required Optional Optional Optional Optional Optional | |||||
*/ | |||||
/** Event handler for the USB_ControlRequest event. | |||||
* This is fired before passing along unhandled control requests to the library for processing internally. | |||||
*/ | |||||
void EVENT_USB_Device_ControlRequest(void) | |||||
{ | |||||
uint8_t* ReportData = NULL; | |||||
uint8_t ReportSize = 0; | |||||
/* Handle HID Class specific requests */ | |||||
switch (USB_ControlRequest.bRequest) | |||||
{ | |||||
case HID_REQ_GetReport: | |||||
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) | |||||
{ | |||||
Endpoint_ClearSETUP(); | |||||
// Interface | |||||
switch (USB_ControlRequest.wIndex) { | |||||
case KEYBOARD_INTERFACE: | |||||
// TODO: test/check | |||||
ReportData = (uint8_t*)&keyboard_report_sent; | |||||
ReportSize = sizeof(keyboard_report_sent); | |||||
break; | |||||
} | |||||
/* Write the report data to the control endpoint */ | |||||
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize); | |||||
Endpoint_ClearOUT(); | |||||
} | |||||
break; | |||||
case HID_REQ_SetReport: | |||||
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) | |||||
{ | |||||
// Interface | |||||
switch (USB_ControlRequest.wIndex) { | |||||
case KEYBOARD_INTERFACE: | |||||
Endpoint_ClearSETUP(); | |||||
while (!(Endpoint_IsOUTReceived())) { | |||||
if (USB_DeviceState == DEVICE_STATE_Unattached) | |||||
return; | |||||
} | |||||
keyboard_led_stats = Endpoint_Read_8(); | |||||
Endpoint_ClearOUT(); | |||||
Endpoint_ClearStatusStage(); | |||||
break; | |||||
} | |||||
} | |||||
break; | |||||
case HID_REQ_GetProtocol: | |||||
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) | |||||
{ | |||||
Endpoint_ClearSETUP(); | |||||
while (!(Endpoint_IsINReady())); | |||||
Endpoint_Write_8(protocol_report); | |||||
Endpoint_ClearIN(); | |||||
Endpoint_ClearStatusStage(); | |||||
} | |||||
break; | |||||
case HID_REQ_SetProtocol: | |||||
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) | |||||
{ | |||||
Endpoint_ClearSETUP(); | |||||
Endpoint_ClearStatusStage(); | |||||
protocol_report = ((USB_ControlRequest.wValue & 0xFF) != 0x00); | |||||
} | |||||
break; | |||||
case HID_REQ_SetIdle: | |||||
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) | |||||
{ | |||||
Endpoint_ClearSETUP(); | |||||
Endpoint_ClearStatusStage(); | |||||
idle_duration = ((USB_ControlRequest.wValue & 0xFF00) >> 8); | |||||
} | |||||
break; | |||||
case HID_REQ_GetIdle: | |||||
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) | |||||
{ | |||||
Endpoint_ClearSETUP(); | |||||
while (!(Endpoint_IsINReady())); | |||||
Endpoint_Write_8(idle_duration); | |||||
Endpoint_ClearIN(); | |||||
Endpoint_ClearStatusStage(); | |||||
} | |||||
break; | |||||
} | |||||
} | |||||
/******************************************************************************* | |||||
* Host driver | |||||
******************************************************************************/ | |||||
static uint8_t keyboard_leds(void) | |||||
{ | |||||
return keyboard_led_stats; | |||||
} | |||||
static void send_keyboard(report_keyboard_t *report) | |||||
{ | |||||
// TODO: handle NKRO report | |||||
/* Select the Keyboard Report Endpoint */ | |||||
Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); | |||||
/* Check if Keyboard Endpoint Ready for Read/Write */ | |||||
if (Endpoint_IsReadWriteAllowed()) | |||||
{ | |||||
/* Write Keyboard Report Data */ | |||||
Endpoint_Write_Stream_LE(report, sizeof(report_keyboard_t), NULL); | |||||
/* Finalize the stream transfer to send the last packet */ | |||||
Endpoint_ClearIN(); | |||||
} | |||||
keyboard_report_sent = *report; | |||||
} | |||||
static void send_mouse(report_mouse_t *report) | |||||
{ | |||||
#ifdef MOUSE_ENABLE | |||||
/* Select the Mouse Report Endpoint */ | |||||
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); | |||||
/* Check if Mouse Endpoint Ready for Read/Write */ | |||||
if (Endpoint_IsReadWriteAllowed()) | |||||
{ | |||||
/* Write Mouse Report Data */ | |||||
Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL); | |||||
/* Finalize the stream transfer to send the last packet */ | |||||
Endpoint_ClearIN(); | |||||
} | |||||
#endif | |||||
} | |||||
static void send_system(uint16_t data) | |||||
{ | |||||
report_extra_t r = { | |||||
.report_id = REPORT_ID_SYSTEM, | |||||
.usage = data | |||||
}; | |||||
Endpoint_SelectEndpoint(EXTRA_IN_EPNUM); | |||||
if (Endpoint_IsReadWriteAllowed()) { | |||||
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL); | |||||
Endpoint_ClearIN(); | |||||
} | |||||
} | |||||
static void send_consumer(uint16_t data) | |||||
{ | |||||
report_extra_t r = { | |||||
.report_id = REPORT_ID_CONSUMER, | |||||
.usage = data | |||||
}; | |||||
Endpoint_SelectEndpoint(EXTRA_IN_EPNUM); | |||||
if (Endpoint_IsReadWriteAllowed()) { | |||||
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL); | |||||
Endpoint_ClearIN(); | |||||
} | |||||
} | |||||
/******************************************************************************* | |||||
* sendchar | |||||
******************************************************************************/ | |||||
int8_t sendchar(uint8_t c) | |||||
{ | |||||
if (USB_DeviceState != DEVICE_STATE_Configured) | |||||
return -1; | |||||
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); | |||||
uint8_t timeout = 10; | |||||
uint16_t prevFN = USB_Device_GetFrameNumber(); | |||||
while (!Endpoint_IsINReady()) { | |||||
switch (USB_DeviceState) { | |||||
case DEVICE_STATE_Unattached: | |||||
case DEVICE_STATE_Suspended: | |||||
return -1; | |||||
} | |||||
if (Endpoint_IsStalled()) | |||||
return -1; | |||||
if (prevFN != USB_Device_GetFrameNumber()) { | |||||
if (!(timeout--)) | |||||
return -1; | |||||
prevFN = USB_Device_GetFrameNumber(); | |||||
} | |||||
} | |||||
Endpoint_Write_8(c); | |||||
// send when packet is full | |||||
if (!Endpoint_IsReadWriteAllowed()) | |||||
Endpoint_ClearIN(); | |||||
return 0; | |||||
} |
/* | |||||
* Copyright 2012 Jun Wako <[email protected]> | |||||
* This file is based on: | |||||
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse | |||||
* LUFA-120219/Demos/Device/Lowlevel/GenericHID | |||||
*/ | |||||
/* | |||||
LUFA Library | |||||
Copyright (C) Dean Camera, 2012. | |||||
dean [at] fourwalledcubicle [dot] com | |||||
www.lufa-lib.org | |||||
*/ | |||||
/* | |||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) | |||||
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) | |||||
Permission to use, copy, modify, distribute, and sell this | |||||
software and its documentation for any purpose is hereby granted | |||||
without fee, provided that the above copyright notice appear in | |||||
all copies and that both that the copyright notice and this | |||||
permission notice and warranty disclaimer appear in supporting | |||||
documentation, and that the name of the author not be used in | |||||
advertising or publicity pertaining to distribution of the | |||||
software without specific, written prior permission. | |||||
The author disclaim all warranties with regard to this | |||||
software, including all implied warranties of merchantability | |||||
and fitness. In no event shall the author be liable for any | |||||
special, indirect or consequential damages or any damages | |||||
whatsoever resulting from loss of use, data or profits, whether | |||||
in an action of contract, negligence or other tortious action, | |||||
arising out of or in connection with the use or performance of | |||||
this software. | |||||
*/ | |||||
#ifndef _LUFA_H_ | |||||
#define _LUFA_H_ | |||||
#include <avr/io.h> | |||||
#include <avr/wdt.h> | |||||
#include <avr/power.h> | |||||
#include <avr/interrupt.h> | |||||
#include <stdbool.h> | |||||
#include <string.h> | |||||
#include <LUFA/Version.h> | |||||
#include <LUFA/Drivers/USB/USB.h> | |||||
/* extra report structure */ | |||||
typedef struct { | |||||
uint8_t report_id; | |||||
uint16_t usage; | |||||
} __attribute__ ((packed)) report_extra_t; | |||||
#endif |
OPT_DEFS += -DHOST_PJRC | |||||
SRC += pjrc.c \ | |||||
usb_keyboard.c \ | |||||
usb_debug.c \ | |||||
usb.c \ | |||||
bootloader_teensy.c | |||||
PJRC_DIR = protocol/pjrc | |||||
OPT_DEFS += -DHOST_PJRC | |||||
# Search Path | |||||
VPATH += $(TOP_DIR)/protocol/pjrc | |||||
SRC += $(PJRC_DIR)/main.c \ | |||||
$(PJRC_DIR)/pjrc.c \ | |||||
$(PJRC_DIR)/usb_keyboard.c \ | |||||
$(PJRC_DIR)/usb_debug.c \ | |||||
$(PJRC_DIR)/usb.c | |||||
# Option modules | # Option modules | ||||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | ||||
SRC += usb_mouse.c | |||||
SRC += $(PJRC_DIR)/usb_mouse.c | |||||
endif | endif | ||||
ifdef EXTRAKEY_ENABLE | ifdef EXTRAKEY_ENABLE | ||||
SRC += usb_extra.c | |||||
SRC += $(PJRC_DIR)/usb_extra.c | |||||
endif | endif | ||||
# Search Path | |||||
VPATH += $(TOP_DIR)/$(PJRC_DIR) |
/* See http://www.pjrc.com/teensy/jump_to_bootloader.html */ | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include "bootloader.h" | |||||
void bootloader_jump(void) { | |||||
cli(); | |||||
// disable watchdog, if enabled | |||||
// disable all peripherals | |||||
UDCON = 1; | |||||
USBCON = (1<<FRZCLK); // disable USB | |||||
UCSR1B = 0; | |||||
_delay_ms(5); | |||||
#if defined(__AVR_AT90USB162__) // Teensy 1.0 | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0; | |||||
DDRB = 0; DDRC = 0; DDRD = 0; | |||||
PORTB = 0; PORTC = 0; PORTD = 0; | |||||
asm volatile("jmp 0x3E00"); | |||||
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0 | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0; | |||||
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0; | |||||
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; | |||||
asm volatile("jmp 0x7E00"); | |||||
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0 | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0; | |||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; | |||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; | |||||
asm volatile("jmp 0xFC00"); | |||||
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0 | |||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0; | |||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; | |||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; | |||||
asm volatile("jmp 0x1FC00"); | |||||
#endif | |||||
} |
VUSB_DIR = protocol/vusb | |||||
OPT_DEFS += -DHOST_VUSB | OPT_DEFS += -DHOST_VUSB | ||||
SRC += vusb.c \ | |||||
usbdrv.c \ | |||||
usbdrvasm.S \ | |||||
oddebug.c \ | |||||
bootloader_usbasp.c \ | |||||
SRC += $(VUSB_DIR)/main.c \ | |||||
$(VUSB_DIR)/vusb.c \ | |||||
$(VUSB_DIR)/usbdrv/usbdrv.c \ | |||||
$(VUSB_DIR)/usbdrv/usbdrvasm.S \ | |||||
$(VUSB_DIR)/usbdrv/oddebug.c | |||||
ifdef NO_UART | ifdef NO_UART |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#include "bootloader.h" | |||||
void bootloader_jump(void) { | |||||
cli(); | |||||
// This makes custom USBasploader come up. | |||||
MCUSR = 0; | |||||
// ATmega168PA | |||||
// initialize ports | |||||
PORTB = 0; PORTC= 0; PORTD = 0; | |||||
DDRB = 0; DDRC= 0; DDRD = 0; | |||||
// disable interrupts | |||||
EIMSK = 0; EECR = 0; SPCR = 0; | |||||
ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0; | |||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; | |||||
ADCSRA = 0; TWCR = 0; UCSR0B = 0; | |||||
// Boot Loader Section Start Address: | |||||
// BOOTSZ Size Address | |||||
// (lock bit) (word) (word) (byte) | |||||
// '11' 128 0x1F80 0x3F00 | |||||
// '10' 256 0x1F00 0x3E00 | |||||
// '01' 512 0x1E00 0x3C00 | |||||
// '00' 1024 0x1C00 0x3800 | |||||
asm volatile("jmp 0x3800"); | |||||
} |
} | } | ||||
} | } | ||||
#endif | #endif | ||||
if (!suspended) | |||||
if (!suspended) { | |||||
usbPoll(); | usbPoll(); | ||||
keyboard_proc(); | |||||
if (!suspended) | |||||
// TODO: configuration process is incosistent. it sometime fails. | |||||
// To prevent failing to configure NOT scan keyboard during configuration | |||||
if (usbConfiguration && usbInterruptIsReady()) { | |||||
keyboard_proc(); | |||||
} | |||||
vusb_transfer_keyboard(); | vusb_transfer_keyboard(); | ||||
} | |||||
} | } | ||||
} | } |
} | } | ||||
typedef struct { | |||||
uint8_t report_id; | |||||
report_mouse_t report; | |||||
} __attribute__ ((packed)) vusb_mouse_report_t; | |||||
static void send_mouse(report_mouse_t *report) | static void send_mouse(report_mouse_t *report) | ||||
{ | { | ||||
report->report_id = REPORT_ID_MOUSE; | |||||
vusb_mouse_report_t r = { | |||||
.report_id = REPORT_ID_MOUSE, | |||||
.report = *report | |||||
}; | |||||
if (usbInterruptIsReady3()) { | if (usbInterruptIsReady3()) { | ||||
usbSetInterrupt3((void *)report, sizeof(*report)); | |||||
usbSetInterrupt3((void *)&r, sizeof(vusb_mouse_report_t)); | |||||
} | } | ||||
} | } | ||||
typedef struct { | |||||
uint8_t report_id; | |||||
uint16_t usage; | |||||
} __attribute__ ((packed)) report_extra_t; | |||||
static void send_system(uint16_t data) | static void send_system(uint16_t data) | ||||
{ | { | ||||
// Not need static? | |||||
static uint8_t report[] = { REPORT_ID_SYSTEM, 0, 0 }; | |||||
report[1] = data&0xFF; | |||||
report[2] = (data>>8)&0xFF; | |||||
static uint16_t last_data = 0; | |||||
if (data == last_data) return; | |||||
last_data = data; | |||||
report_extra_t report = { | |||||
.report_id = REPORT_ID_SYSTEM, | |||||
.usage = data | |||||
}; | |||||
if (usbInterruptIsReady3()) { | if (usbInterruptIsReady3()) { | ||||
usbSetInterrupt3((void *)&report, sizeof(report)); | usbSetInterrupt3((void *)&report, sizeof(report)); | ||||
} | } | ||||
if (data == last_data) return; | if (data == last_data) return; | ||||
last_data = data; | last_data = data; | ||||
// Not need static? | |||||
static uint8_t report[] = { REPORT_ID_CONSUMER, 0, 0 }; | |||||
report[1] = data&0xFF; | |||||
report[2] = (data>>8)&0xFF; | |||||
report_extra_t report = { | |||||
.report_id = REPORT_ID_CONSUMER, | |||||
.usage = data | |||||
}; | |||||
if (usbInterruptIsReady3()) { | if (usbInterruptIsReady3()) { | ||||
usbSetInterrupt3((void *)&report, sizeof(report)); | usbSetInterrupt3((void *)&report, sizeof(report)); | ||||
} | } |
# | # | ||||
# make extcoff = Convert ELF to AVR Extended COFF. | # make extcoff = Convert ELF to AVR Extended COFF. | ||||
# | # | ||||
# make program = Download the hex file to the device, using avrdude. | |||||
# Please customize the avrdude settings below first! | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | # | ||||
# make debug = Start either simulavr or avarice as specified for debugging, | # make debug = Start either simulavr or avarice as specified for debugging, | ||||
# with avr-gdb or avr-insight as the front end for debugging. | # with avr-gdb or avr-insight as the front end for debugging. | ||||
CFLAGS += -funsigned-char | CFLAGS += -funsigned-char | ||||
CFLAGS += -funsigned-bitfields | CFLAGS += -funsigned-bitfields | ||||
CFLAGS += -ffunction-sections | CFLAGS += -ffunction-sections | ||||
CFLAGS += -fno-inline-small-functions | |||||
CFLAGS += -fpack-struct | CFLAGS += -fpack-struct | ||||
CFLAGS += -fshort-enums | CFLAGS += -fshort-enums | ||||
CFLAGS += -fno-strict-aliasing | |||||
CFLAGS += -Wall | CFLAGS += -Wall | ||||
CFLAGS += -Wstrict-prototypes | CFLAGS += -Wstrict-prototypes | ||||
#CFLAGS += -mshort-calls | #CFLAGS += -mshort-calls | ||||
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' | # (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' | ||||
# | # | ||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref | LDFLAGS = -Wl,-Map=$(TARGET).map,--cref | ||||
#LDFLAGS += -Wl,--relax | |||||
LDFLAGS += -Wl,--relax | |||||
LDFLAGS += -Wl,--gc-sections | LDFLAGS += -Wl,--gc-sections | ||||
LDFLAGS += $(EXTMEMOPTS) | LDFLAGS += $(EXTMEMOPTS) | ||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) | LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) | ||||
program: $(TARGET).hex $(TARGET).eep | program: $(TARGET).hex $(TARGET).eep | ||||
$(PROGRAM_CMD) | $(PROGRAM_CMD) | ||||
teensy: $(TARGET).hex | |||||
teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
flip: $(TARGET).hex | |||||
batchisp -hardware usb -device $(MCU) -operation erase f | |||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program | |||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 | |||||
dfu: $(TARGET).hex | |||||
dfu-programmer $(MCU) erase | |||||
dfu-programmer $(MCU) flash $(TARGET).hex | |||||
dfu-programmer $(MCU) reset | |||||
dfu-start: | |||||
dfu-programmer $(MCU) reset | |||||
dfu-programmer $(MCU) start | |||||
flip-ee: $(TARGET).hex $(TARGET).eep | |||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex | |||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase | |||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program | |||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 | |||||
$(REMOVE) $(TARGET)eep.hex | |||||
dfu-ee: $(TARGET).hex $(TARGET).eep | |||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep | |||||
dfu-programmer $(MCU) reset | |||||
# Generate avr-gdb config/init file which does the following: | # Generate avr-gdb config/init file which does the following: | ||||
# define the reset signal, load the target file, connect to target, and set | # define the reset signal, load the target file, connect to target, and set | ||||
# Compile: create object files from C source files. | # Compile: create object files from C source files. | ||||
$(OBJDIR)/%.o : %.c | $(OBJDIR)/%.o : %.c | ||||
@echo | @echo | ||||
mkdir -p $(@D) | |||||
@echo $(MSG_COMPILING) $< | @echo $(MSG_COMPILING) $< | ||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ | $(CC) -c $(ALL_CFLAGS) $< -o $@ | ||||
$(REMOVE) $(OBJ:.o=.s) | $(REMOVE) $(OBJ:.o=.s) | ||||
$(REMOVE) $(OBJ:.o=.i) | $(REMOVE) $(OBJ:.o=.i) | ||||
$(REMOVE) -r .dep | $(REMOVE) -r .dep | ||||
$(REMOVEDIR) $(OBJDIR) | |||||
$(REMOVE) -r $(OBJDIR) | |||||
show_path: | |||||
@echo VPATH=$(VPATH) | |||||
@echo SRC=$(SRC) | |||||
# Create object files directory | # Create object files directory | ||||
# Listing of phony targets. | # Listing of phony targets. | ||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ | .PHONY : all begin finish end sizebefore sizeafter gccversion \ | ||||
build elf hex eep lss sym coff extcoff \ | build elf hex eep lss sym coff extcoff \ | ||||
clean clean_list program debug gdb-config | |||||
clean clean_list debug gdb-config show_path \ | |||||
program teensy dfu flip dfu-ee flip-ee dfu-start |