- Command can force to enable NKRO even when boot mode
- After boot keyboard may be in boot mode due to BIOS' request

- NKRO is used only when keyboard_protocol = 1(report)

This takes the last, reserved bit there, but doesn't necessitate
a revision to the magic number because it doesn't alter byte order.
Add reference to NKRO virtual dip-switch to documentation.

To have full control of the backlight level.

Including documentation.

- change API of ps2_mouse; ps2_mouse_task()
- remove mouse_report from host.c

- Add action_util.c and remove action_oneshot.c
- Add oneshot_mods for MODS_ONESHOT
- Add weak_mods for MODS_KEY and MACRO
- weak_mods is cleared when layer switching

- See https://github.com/tmk/tmk_keyboard/issues/60
- **Except for modifiers** a key pressed before the tapping starts should be released immediately
- 'Mod-Tap key'(like shift-;) didn't work from this fix: 4d0b3aa Fix Tapping: release of a key pressed before tap
This key sequence should register ':', not ';'. With the fix Shift is
released before settlement of tapping, this registers ';'.
    Shift   ~~___~~~~~~~
    ;(Tap)  ~~~____~~~~

- Add print messages of USB intialize procesure.
- call out sei() in earlier stage. LUFA API doc of USB_Init() says:
interrupts must be enabled within 500ms ... to ensure that the host does
not time out whilst enumerating the device
- remove matrix_init() from suspend_wakeup_init(). It is not needed in
  fact and if matrix_init() takes long time to initialize it prevents
host emnumerating the device.

- Call of function pointer is compiled into 'icall' instruction.
It should use word address but it has used byte address :( It seems
jump has worked luckily by chance until now. why it worked?

- immediately process release event of a key pressed before tapping