c2d830c07c
USB initialize when plug-in during battery powered
il y a 9 ans
8f5f25fcd5
Revert lufa/lufa.c
il y a 9 ans
7dde35d4f7
integrated serial mouse drivers as a feature into the firmware architecture
* can be enabled by defining Makefile macro SERIAL_MOUSE_MICROSOFT_ENABLE or
SERIAL_MOUSE_MOUSESYSTEMS_ENABLE.
* Serial implementation can be chosen via SERIAL_MOUSE_USE_SOFT and
SERIAL_MOUSE_USE_UART macros
* UART configuration still has to be done in config.h: I added working clauses
for both mouse protocols to ps2_usb's config.h
il y a 10 ans
32997200f7
Fix NKRO code when NKRO is disable
il y a 10 ans
abe5edcaa7
Fix set LED for NKRO keyboard interface
il y a 10 ans
b03717a10c
Unused endpoint of console OUT is commentout'd
il y a 10 ans
22854eb71b
NKRO is disable when SET_PROTOCOL(boot)
- Command can force to enable NKRO even when boot mode
- After boot keyboard may be in boot mode due to BIOS' request
il y a 10 ans
5e3f2d2b2e
Make NKRO deafult when it is available
- NKRO is used only when keyboard_protocol = 1(report)
il y a 10 ans
ad4cba172b
Move macro definitions from lufa.c to lufa.h
il y a 10 ans
a5d4a1f3e1
Return when ready check loop is timeouted(Fix #115)
il y a 10 ans
532e100450
Add ps2_usart.c and fix set_led at USB wake
il y a 10 ans
9d40be1990
Wait for USB starting up to make debug print available
il y a 10 ans
d267ee2ada
Fix LUFA blocking during startup
- Blocking occurs if built without option INTERRUPT_CONTROL_ENDPOINT
il y a 10 ans
7d692c492c
Fix USB initilaize on LUFA
- Add print messages of USB intialize procesure.
- call out sei() in earlier stage. LUFA API doc of USB_Init() says:
interrupts must be enabled within 500ms ... to ensure that the host does
not time out whilst enumerating the device
- remove matrix_init() from suspend_wakeup_init(). It is not needed in
fact and if matrix_init() takes long time to initialize it prevents
host emnumerating the device.
il y a 10 ans
daa4a4235f
Add NKRO support for LUFA
il y a 11 ans
1eb67303ee
Fix LUFA host driver for unconfigured state
il y a 11 ans
afc3148e23
Add supsend and wakeup to pjrc stack
il y a 11 ans
f0c5f1b910
Add breathing sleep LED during USB suspend
il y a 11 ans
42f6ff0886
Add power down mode sleep and watchdog interrupt
il y a 11 ans
c8cfde0138
Add intial code of RemoteWakeUp
il y a 11 ans
e9e4c0edc5
Add support for LUFA-120730
il y a 11 ans
16a583d7fd
Fix usage of debug flag
il y a 11 ans
4ae979f6ef
Initial version of new code for layer switch is added.
il y a 11 ans
45ea1874d6
Fix timeout logic of LUFA sendchar(), sned_*().
il y a 11 ans
c5060ea819
test build of 'Host shield' in minimal env.
il y a 11 ans
7350b7c6aa
Fix the way of sending out IN packet.
This fixes problem that it losts keycode when send keycodes in row in layer.c.
Undef CONSOLE_ENABLE build option makes this problem clear.
il y a 11 ans
e075361b6f
Add CONSOLE_ENABLE build option to LUFA.
il y a 12 ans
8947029950
Interrupt driven Control ep and Console task
il y a 12 ans
a112f3614e
confirm SetReport LED.
il y a 12 ans
f2ebac101d
Add conditional compile for MOUSE_ENABLE and EXTRAKEY_ENABLE.
il y a 12 ans
cc68adeb57
Add protocol/lufa. LUFA supported now.
il y a 12 ans
3d81d5221e
Add consumer/system control feature to LUFA.
il y a 12 ans
a9a3610dd4
Add LUFA mouse feature and fix mouse report.
- add LUFA boot mouse feature
- remove report_id from mouse report
- fix LUFA descriptor
il y a 12 ans
effa5914bf
clean descriptor setting. Remove keyboard OUT Endpoint.
- to make descriptor get VID/PID/Version from config.h.
- remove keyboard out endpoint. Instead host can use control request.
il y a 12 ans
3969ec09b4
Add sendchar with Generic HID to support debug print.
il y a 12 ans
dd93d2915f
initial attempt for LUFA.
Add keyboard/lufa macway keyobard with LUFA.
Add new program target to rule.mk; flip, dfu and teensy
il y a 12 ans
tmk
Robin Haberkorn