IBM 4704 to USB keyboard converter ================================== This firmware converts IBM 4704 keyboard protocol to USB HID. Keyboard initialization process takes a few seconds at start up. **You may need to plug USB cable after hooking up your keyboard to the converter.** TMK Converter for IBM4704 is available here: https://geekhack.org/index.php?topic=72052.0 Update ------ - 2016/09/30 Unimap editor support - 2015/09/07 Added keymap for Alps 102-key. Thanks, tai @ geekhack! - 2015/05/05 Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack! - 2015/05/19 Fixed a protocol handling bug. Supported Keyboard ------------------ ### IBM capacitive switch models: - 6019273 Model 100 50-key (grid layout) http://kishy.ca/?p=894 - 6019284 Model 200 62-key Alpha(60% layout) http://kishy.ca/?p=894 - 6019303 Model 300 77-key Expanded Alpha http://deskthority.net/photos-f62/ibm-6019303-t8502.html - 6020218 Model 400 107-key Full key http://kishy.ca/?p=894 ### Alps switch(vintage Green) models: - 5954339 Japanese 102-key http://deskthority.net/post87127.html#p87127 - 6112883 Japanese 102-key http://geekhack.org/index.php?topic=52888.msg1194489#msg1194489 - 6112884 Japanese 102-key http://geekhack.org/index.php?topic=50437.msg1193047#msg1193047 - 6341739 Chinese 102-key http://geekhack.org/index.php?topic=52888.msg1176566#msg1176566 Connector --------- Keyboard Plug from front: DSUB-9 ------------- \ N 2 3 4 5 / \ N N N N / --------- 2 GND 3 VCC 5V 4 DATA 5 CLOCK N No connection/No pin. Connection ---------- In case of using ATMega32U4/U2 1. Supply power with VCC and GND. 2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h. 3. Optionally you may need pull-up register. 1KOhm probably work. TMK Converter can supports IBM 4704. https://github.com/tmk/keyboard_converter Build Firmware -------------- Just run `make`: $ make -f For TMK Converter rev.1 use `Makefile.rev1` as makefile: $ make -f Makefile.rev1 For TMK Converter rev.2 use `Makefile.rev2` as makefile: $ make -f Makefile.rev2 To select keymap: $ make -f KEYMAP=[plain|alsp102key|...] To indentify your TMK Converter revision see [this](https://github.com/tmk/keyboard_converter#pcb-revisions). Keymap ------ Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_.c` and see keymap document(you can find in top README.md) and existent keymap files. Use `KEYMAP_ALPS102()` to define your keymap for Alps models.