Keyboard firmwares for Atmel AVR and Cortex-M
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293
  1. /*
  2. Copyright 2012 Jun Wako <[email protected]>
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #ifndef CONFIG_H
  15. #define CONFIG_H
  16. /* USB Device descriptor parameter */
  17. #define VENDOR_ID 0xFEED
  18. #define PRODUCT_ID 0x0A0C
  19. #define DEVICE_VER 0x0009
  20. #define MANUFACTURER di0ib
  21. #define PRODUCT The GNAP! Keyboard
  22. #define DESCRIPTION A compact keyboard
  23. /* key matrix size */
  24. #define MATRIX_ROWS 4
  25. #define MATRIX_COLS 12
  26. /* define if matrix has ghost */
  27. //#define MATRIX_HAS_GHOST
  28. /* Set 0 if debouncing isn't needed */
  29. #define DEBOUNCE 5
  30. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  31. #define LOCKING_SUPPORT_ENABLE
  32. /* Locking resynchronize hack */
  33. #define LOCKING_RESYNC_ENABLE
  34. /* key combination for command */
  35. #define IS_COMMAND() ( \
  36. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
  37. )
  38. /* Enable GNAP matrix serial output */
  39. #define GNAP_ENABLE
  40. /* USART configuration */
  41. #ifdef __AVR_ATmega32U4__
  42. # define SERIAL_UART_BAUD 9600
  43. # define SERIAL_UART_DATA UDR1
  44. # define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
  45. # define SERIAL_UART_RXD_VECT USART1_RX_vect
  46. # define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
  47. # define SERIAL_UART_INIT() do { \
  48. /* baud rate */ \
  49. UBRR1L = SERIAL_UART_UBRR; \
  50. /* baud rate */ \
  51. UBRR1H = SERIAL_UART_UBRR >> 8; \
  52. /* enable TX */ \
  53. UCSR1B = _BV(TXEN1); \
  54. /* 8-bit data */ \
  55. UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
  56. sei(); \
  57. } while(0)
  58. # else
  59. # error "USART configuration is needed."
  60. #endif
  61. /*
  62. * Feature disable options
  63. * These options are also useful to firmware size reduction.
  64. */
  65. /* disable debug print */
  66. //#define NO_DEBUG
  67. /* disable print */
  68. //#define NO_PRINT
  69. /* disable action features */
  70. //#define NO_ACTION_LAYER
  71. //#define NO_ACTION_TAPPING
  72. //#define NO_ACTION_ONESHOT
  73. //#define NO_ACTION_MACRO
  74. //#define NO_ACTION_FUNCTION
  75. #endif