Keyboard firmwares for Atmel AVR and Cortex-M
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
di0ib ac70ea56ae Update readme.md пре 3 година
..
pcb Update readme.md пре 3 година
FLASH.bin mf68 пре 3 година
GNAP.jpg GNAP keyboard пре 3 година
LED_FastGPIO.ino GNAP keyboard пре 3 година
Makefile GNAP keyboard пре 3 година
config.h GNAP keyboard пре 3 година
gnap.bin mf68 пре 3 година
keymap_common.h i75, cleanup keymaps пре 3 година
keymap_gnap.c update keymap пре 3 година
led.c mf68 пре 3 година
matrix.c i75, cleanup keymaps пре 3 година
pcb-front.png GNAP keyboard пре 3 година
readme.md Update readme пре 3 година
schematic.png GNAP keyboard пре 3 година

readme.md

GNAP! keyboard firmware

GNAP! 1.0 Assembled

GNAP! dual matrix, dual controller. Per key LED control, reactive lighting. GNAP! 1.0 PCB Front GNAP! 1.0 PCB Schematic

Dual Pro Micro’s. One running TMK, the other running an Arduino sketch driving the LEDs. Pro Micro’s are connected to each other via hardware serial UART.

Pinout

Rows D1, D0, D4, C6 
Cols D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4

keymap_gnap.c contains functions to send bytes to the LED controller. The Arduino code interprets these to change modes or brightness.

//GNAP keymap functions
void gnaplight_step(void) {
    serial_send(101);
}

void gnaplight_toggle(void) {
    serial_send(100);
}

\tmk_core\common\keyboard.c was modified to send the row/column of the key being pressed encoded as as single byte over the serial link to the LED controller.

#ifdef GNAP_ENABLE
                //send single byte with value of row column
                serial_send((r*16)+c);
#endif

The example Arduino sketch LED_FastGPIO.ino uses the fastGPIO and TimerOne libraries. These can be installed with the Library manager.

FastGPIO TimerOne