Keyboard firmwares for Atmel AVR and Cortex-M
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符
di0ib ff60175a71 Update readme.md 7 年前
..
bootloader kwark bootloader 7 年前
pcb Update readme.md 7 年前
FLASH.bin Revert "Revert "keymp updated"" 7 年前
LED_FastGPIO.ino kwark 1.0 7 年前
Makefile kwark 1.0 7 年前
config.h kwark 1.0 7 年前
keymap_common.h kwark 1.0 7 年前
keymap_kwark.c Revert "Revert "keymp updated"" 7 年前
kwark.bin Revert "Revert "keymp updated"" 7 年前
kwark.jpg kwark 1.0 7 年前
led.c pro micro LEDs as capslock indicator 7 年前
matrix.c kwark 1.0 7 年前
pcb_top.png kwark pcb 7 年前
readme.md kwark pcb 7 年前

readme.md

KWARK keyboard firmware

KWARK 1.0 Assembled

KWARK dual matrix, dual controller. Per key LED control, reactive lighting. KWARK 1.0 PCB Front Based on the GNAP!

Dual Pro Micro’s. One running TMK, the other running an Arduino sketch driving the LEDs. Pro Micro’s are connected to each other via hardware serial UART.

Pinout

Rows D1, D0, D4, C6 
Cols D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4

keymap_kwark.c contains functions to send bytes to the LED controller. The Arduino code interprets these to change modes or brightness.

//GNAP keymap functions
void gnaplight_step(void) {
    serial_send(101);
}

void gnaplight_toggle(void) {
    serial_send(100);
}

\tmk_core\common\keyboard.c was modified to send the row/column of the key being pressed encoded as as single byte over the serial link to the LED controller.

#ifdef GNAP_ENABLE
                //send single byte with value of row column
                serial_send((r*16)+c);
#endif

The example Arduino sketch LED_FastGPIO.ino uses the fastGPIO and TimerOne libraries. These can be installed with the Library manager.

FastGPIO TimerOne

Original Quark Keyboard