Keyboard firmwares for Atmel AVR and Cortex-M
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
di0ib ff60175a71 Update readme.md 7 年之前
..
bootloader kwark bootloader 7 年之前
pcb Update readme.md 7 年之前
FLASH.bin Revert "Revert "keymp updated"" 7 年之前
LED_FastGPIO.ino kwark 1.0 7 年之前
Makefile kwark 1.0 7 年之前
config.h kwark 1.0 7 年之前
keymap_common.h kwark 1.0 7 年之前
keymap_kwark.c Revert "Revert "keymp updated"" 7 年之前
kwark.bin Revert "Revert "keymp updated"" 7 年之前
kwark.jpg kwark 1.0 7 年之前
led.c pro micro LEDs as capslock indicator 7 年之前
matrix.c kwark 1.0 7 年之前
pcb_top.png kwark pcb 7 年之前
readme.md kwark pcb 7 年之前

readme.md

KWARK keyboard firmware

KWARK 1.0 Assembled

KWARK dual matrix, dual controller. Per key LED control, reactive lighting. KWARK 1.0 PCB Front Based on the GNAP!

Dual Pro Micro’s. One running TMK, the other running an Arduino sketch driving the LEDs. Pro Micro’s are connected to each other via hardware serial UART.

Pinout

Rows D1, D0, D4, C6 
Cols D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4

keymap_kwark.c contains functions to send bytes to the LED controller. The Arduino code interprets these to change modes or brightness.

//GNAP keymap functions
void gnaplight_step(void) {
    serial_send(101);
}

void gnaplight_toggle(void) {
    serial_send(100);
}

\tmk_core\common\keyboard.c was modified to send the row/column of the key being pressed encoded as as single byte over the serial link to the LED controller.

#ifdef GNAP_ENABLE
                //send single byte with value of row column
                serial_send((r*16)+c);
#endif

The example Arduino sketch LED_FastGPIO.ino uses the fastGPIO and TimerOne libraries. These can be installed with the Library manager.

FastGPIO TimerOne

Original Quark Keyboard