1
0
tmk_keyboard/keyboard/mf68
2016-11-29 09:07:45 -10:00
..
pcb Create readme.md 2016-11-29 09:07:45 -10:00
backlight.c mf68 2016-11-01 07:35:01 -10:00
config.h mf68 2016-11-01 07:35:01 -10:00
keymap_common.h mf68 2016-11-01 07:35:01 -10:00
keymap_mf68.c mf68 2016-11-01 07:35:01 -10:00
led.c mf68 2016-11-01 07:35:01 -10:00
Makefile mf68 2016-11-01 07:35:01 -10:00
matrix.c mf68 2016-11-01 07:35:01 -10:00
pcb-bottom.png updated images 2016-11-01 07:39:48 -10:00
pcb-top.png updated images 2016-11-01 07:39:48 -10:00
readme.md update readme 2016-11-01 07:42:18 -10:00

mf68 keyboard firmware

mf68 1.0 Assembled

mf68 keyboard. 9x8 matrix. mf68 1.0 PCB Front mf68 1.0 PCB Bottom

Replacement PCB for Magicforce 68. Arduino Pro Micro controller.

Pinout

col: D3  D2  D1  D0  D4  C6  D7  E6  B4
row: B6  B2  B3  B1  F7  F6  F5  F4

Mosfet on B5 to control backlight.

6x6mm pushbutton connected between ground and reset pin.

BOM

1	Pro Micro
2	12pin SIP headers (usually comes with chinese Pro Micros)
1	Micro USB cable to cut up to make a pigtail
68	1n4148 diodes
1	6x6mm square tactile switch

Needed if you want LEDs

68-70	LEDs (68 in switches and 2 additional under spacebar)
68-70	Resistors for LEDs. Use online LED caculator to choose value
1	FDS6630A SOIC FET
1	100ohm resistor (R71)
1	100Kilo ohm resistor (R72)

Recycled from original keyboard

1	Original Plate/Case
68	Switches
1	Set of keycaps
1	Set of stabilizers
1	Mini USB cable

If making custom sandwich style case

mini USB connector
Molex part 54819-0519