123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112 |
- /*
- Copyright 2011 Jun Wako <[email protected]>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef CONFIG_H
- #define CONFIG_H
-
-
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x4242
- #define DEVICE_VER 0x0104
- #define MANUFACTURER t.m.k.
- #define PRODUCT HHKB mod
- #define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
-
-
- /* matrix size */
- #ifdef HHKB_JP
- # define MATRIX_ROWS 16
- #else
- # define MATRIX_ROWS 8
- #endif
- #define MATRIX_COLS 8
-
-
- /* key combination for command */
- #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-
- /* period of tapping(ms) */
- #define TAPPING_TERM 300
- /* tap count needed for toggling a feature */
- #define TAPPING_TOGGLE 5
- /* Oneshot timeout(ms) */
- #define ONESHOT_TIMEOUT 300
-
- /* Boot Magic salt key: Space */
- #define BOOTMAGIC_KEY_SALT KC_SPACE
-
- /* power control of key switch board */
- #define HHKB_POWER_SAVING
-
- /*
- * Hardware Serial(UART)
- * Baud rate are calculated with round off(+0.5).
- */
- #ifdef __AVR_ATmega32U4__
- /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
- #define UCSR1D _SFR_MEM8(0xCB)
- #define RTSEN 0
- #define CTSEN 1
-
- #define SERIAL_UART_BAUD 115200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
- UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
- UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
- DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
- sei(); \
- } while(0)
- #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
- #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
- #else
- #error "USART configuration is needed."
- #endif
-
-
- /* for debug */
- #define SUART_OUT_PORT PORTD
- #define SUART_OUT_BIT 0
- #define SUART_IN_PIN PIND
- #define SUART_IN_BIT 1
-
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
- #endif
|