123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249 |
- /*******************************************************************************
- * DISCLAIMER
- * This software is supplied by Renesas Electronics Corporation and is only
- * intended for use with Renesas products. No other uses are authorized. This
- * software is owned by Renesas Electronics Corporation and is protected under
- * all applicable laws, including copyright laws.
- * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
- * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
- * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
- * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
- * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
- * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
- * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
- * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
- * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * Renesas reserves the right, without notice, to make changes to this software
- * and to discontinue the availability of this software. By using this software,
- * you agree to the additional terms and conditions found by accessing the
- * following link:
- * http://www.renesas.com/disclaimer
- * Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
- *******************************************************************************/
- /*******************************************************************************
- * File Name : usb1_function_intrn.c
- * $Rev: 1116 $
- * $Date:: 2014-07-09 16:29:19 +0900#$
- * Device(s) : RZ/A1H
- * Tool-Chain :
- * OS : None
- * H/W Platform :
- * Description : RZ/A1H R7S72100 USB Sample Program
- * Operation :
- * Limitations :
- *******************************************************************************/
-
-
- /*******************************************************************************
- Includes <System Includes> , "Project Includes"
- *******************************************************************************/
- #include "usb1_function.h"
-
-
- /*******************************************************************************
- Typedef definitions
- *******************************************************************************/
-
-
- /*******************************************************************************
- Macro definitions
- *******************************************************************************/
-
-
- /*******************************************************************************
- Imported global variables and functions (from other files)
- *******************************************************************************/
-
-
- /*******************************************************************************
- Exported global variables and functions (to be accessed by other files)
- *******************************************************************************/
-
-
- /*******************************************************************************
- Private global variables and functions
- *******************************************************************************/
-
-
- /*******************************************************************************
- * Function Name: usb1_function_brdy_int
- * Description : Executes BRDY interrupt(USB_FUNCTION_PIPE1-9).
- * : According to the pipe that interrupt is generated in,
- * : reads/writes buffer allocated in the pipe.
- * : This function is executed in the BRDY interrupt handler.
- * : This function clears BRDY interrupt status and BEMP interrupt
- * : status.
- * Arguments : uint16_t Status ; BRDYSTS Register Value
- * : uint16_t Int_enbl ; BRDYENB Register Value
- * Return Value : none
- *******************************************************************************/
- #if 0
- void usb1_function_brdy_int (uint16_t status, uint16_t int_enb)
- {
- uint32_t int_sense = 0;
- uint16_t pipe;
- uint16_t pipebit;
-
- for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
- {
- pipebit = g_usb1_function_bit_set[pipe];
-
- if ((status & pipebit) && (int_enb & pipebit))
- {
- USB201.BRDYSTS = (uint16_t)~pipebit;
- USB201.BEMPSTS = (uint16_t)~pipebit;
- if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA)
- {
- if (g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] != USB_FUNCTION_DMA_READY)
- {
- usb1_function_dma_interrupt_d0fifo(int_sense);
- }
-
- if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
- {
- usb1_function_read_dma(pipe);
- usb1_function_disable_brdy_int(pipe);
- }
- else
- {
- USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR;
- g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
- }
- }
- else if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_DMA)
- {
- if (g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] != USB_FUNCTION_DMA_READY)
- {
- usb1_function_dma_interrupt_d1fifo(int_sense);
- }
-
- if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
- {
- usb1_function_read_dma(pipe);
- usb1_function_disable_brdy_int(pipe);
- }
- else
- {
- USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR;
- g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
- }
- }
- else
- {
- if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_DIR_SHIFT, USB_PIPECFG_DIR) == 0)
- {
- usb1_function_read_buffer(pipe);
- }
- else
- {
- usb1_function_write_buffer(pipe);
- }
- }
- }
- }
- }
- #endif
-
- /*******************************************************************************
- * Function Name: usb1_function_nrdy_int
- * Description : Executes NRDY interrupt(USB_FUNCTION_PIPE1-9).
- * : Checks NRDY interrupt cause by PID. When the cause if STALL,
- * : regards the pipe state as STALL and ends the processing.
- * : Then the cause is not STALL, increments the error count to
- * : communicate again. When the error count is 3, determines
- * : the pipe state as DEVDRV_USBF_PIPE_NORES and ends the processing.
- * : This function is executed in the NRDY interrupt handler.
- * : This function clears NRDY interrupt status.
- * Arguments : uint16_t status ; NRDYSTS Register Value
- * : uint16_t int_enb ; NRDYENB Register Value
- * Return Value : none
- *******************************************************************************/
- void usb1_function_nrdy_int (uint16_t status, uint16_t int_enb)
- {
- uint16_t pid;
- uint16_t pipe;
- uint16_t bitcheck;
-
- bitcheck = (uint16_t)(status & int_enb);
-
- USB201.NRDYSTS = (uint16_t)~status;
-
- for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
- {
- if ((bitcheck&g_usb1_function_bit_set[pipe]) == g_usb1_function_bit_set[pipe])
- {
- if (RZA_IO_RegRead_16(&USB201.SYSCFG0, USB_SYSCFG_DCFM_SHIFT, USB_SYSCFG_DCFM) == 1)
- {
- if (g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_WAIT)
- {
- pid = usb1_function_get_pid(pipe);
- if ((pid == DEVDRV_USBF_PID_STALL) || (pid == DEVDRV_USBF_PID_STALL2))
- {
- g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_STALL;
- }
- else
- {
- g_usb1_function_PipeIgnore[pipe]++;
- if (g_usb1_function_PipeIgnore[pipe] == 3)
- {
- g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_NORES;
- }
- else
- {
- usb1_function_set_pid_buf(pipe);
- }
- }
- }
- }
- else
- {
- /* USB Function */
- }
- }
- }
- }
-
- /*******************************************************************************
- * Function Name: usb1_function_bemp_int
- * Description : Executes BEMP interrupt(USB_FUNCTION_PIPE1-9).
- * Arguments : uint16_t status ; BEMPSTS Register Value
- * : uint16_t int_enb ; BEMPENB Register Value
- * Return Value : none
- *******************************************************************************/
- void usb1_function_bemp_int (uint16_t status, uint16_t int_enb)
- {
- uint16_t pid;
- uint16_t pipe;
- uint16_t bitcheck;
- uint16_t inbuf;
-
- bitcheck = (uint16_t)(status & int_enb);
-
- USB201.BEMPSTS = (uint16_t)~status;
-
- for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
- {
- if ((bitcheck&g_usb1_function_bit_set[pipe]) == g_usb1_function_bit_set[pipe])
- {
- pid = usb1_function_get_pid(pipe);
-
- if ((pid == DEVDRV_USBF_PID_STALL) || (pid == DEVDRV_USBF_PID_STALL2))
- {
- g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_STALL;
- }
- else
- {
- inbuf = usb1_function_get_inbuf(pipe);
-
- if (inbuf == 0)
- {
- usb1_function_disable_bemp_int(pipe);
- usb1_function_set_pid_nak(pipe);
- g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
- }
- }
- }
- }
- }
-
- /* End of File */
|