94 line
3.2 KiB
Plaintext
94 line
3.2 KiB
Plaintext
/** \file
|
|
*
|
|
* This file contains special DoxyGen information for the generation of the main page and other special
|
|
* documentation pages. It is not a project source file.
|
|
*/
|
|
|
|
/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
|
|
*
|
|
* \section Sec_Compat Demo Compatibility:
|
|
*
|
|
* The following list indicates what microcontrollers are compatible with this demo.
|
|
*
|
|
* \li Series 7 USB AVRs (AT90USBxxx7)
|
|
* \li Series 6 USB AVRs (AT90USBxxx6)
|
|
* \li Series 4 USB AVRs (ATMEGAxxU4)
|
|
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
|
|
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
|
|
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
|
|
*
|
|
* \section Sec_Info USB Information:
|
|
*
|
|
* The following table gives a rundown of the USB utilization of this demo.
|
|
*
|
|
* <table>
|
|
* <tr>
|
|
* <td><b>USB Mode:</b></td>
|
|
* <td>Device</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>USB Class:</b></td>
|
|
* <td>Communications Device Class (CDC) \n
|
|
* Mass Storage Device</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>USB Subclass:</b></td>
|
|
* <td>Abstract Control Model (ACM) \n
|
|
* Bulk-Only Transport</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>Relevant Standards:</b></td>
|
|
* <td>USBIF CDC Class Standard \n
|
|
* USBIF Mass Storage Standard \n
|
|
* USB Bulk-Only Transport Standard \n
|
|
* SCSI Primary Commands Specification \n
|
|
* SCSI Block Commands Specification</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>Supported USB Speeds:</b></td>
|
|
* <td>Full Speed Mode</td>
|
|
* </tr>
|
|
* </table>
|
|
*
|
|
* \section Sec_Description Project Description:
|
|
*
|
|
* Combined Communications Device Class/Mass Storage demonstration application.
|
|
* This gives a simple reference application for implementing a combined
|
|
* CDC and Mass Storage device acting as a both a virtual serial port and a flash
|
|
* drive. Joystick actions are transmitted to the host as strings, and data can be
|
|
* written to or read from the exposed flash drive interface in the same manner as
|
|
* other USB flash drives. The device does not respond to serial data sent from the
|
|
* host.
|
|
*
|
|
* After running this demo for the first time on a new computer,
|
|
* you will need to supply the .INF file located in this demo
|
|
* project's directory as the device's driver when running under
|
|
* Windows. This will enable Windows to use its inbuilt CDC drivers,
|
|
* negating the need for custom drivers for the device. Other
|
|
* Operating Systems should automatically use their own inbuilt
|
|
* CDC-ACM drivers.
|
|
*
|
|
* \section Sec_Options Project Options
|
|
*
|
|
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
|
|
*
|
|
* <table>
|
|
* <tr>
|
|
* <th><b>Define Name:</b></th>
|
|
* <th><b>Location:</b></th>
|
|
* <th><b>Description:</b></th>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>TOTAL_LUNS</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
|
|
* this can be set to any positive non-zero amount.</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>DISK_READ_ONLY</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Configuration define, indicating if the disk should be write protected or not.</td>
|
|
* </tr>
|
|
*/
|
|
|