tmk_keyboard

Keyboard firmwares for Atmel AVR and Cortex-M

di0ib 2bf5c97afa Update readme		vor 7 Jahren
..
FLASH.bin	GNAP keyboard	vor 7 Jahren
GNAP.jpg	GNAP keyboard	vor 7 Jahren
LED_FastGPIO.ino	GNAP keyboard	vor 7 Jahren
Makefile	GNAP keyboard	vor 7 Jahren
config.h	GNAP keyboard	vor 7 Jahren
keymap_common.h	GNAP keyboard	vor 7 Jahren
keymap_gnap.c	GNAP keyboard	vor 7 Jahren
led.c	GNAP keyboard	vor 7 Jahren
matrix.c	GNAP keyboard	vor 7 Jahren
pcb-front.png	GNAP keyboard	vor 7 Jahren
readme.md	Update readme	vor 7 Jahren
schematic.png	GNAP keyboard	vor 7 Jahren

GNAP! keyboard firmware

GNAP! dual matrix, dual controller. Per key LED control, reactive lighting.

Dual Pro Micro’s. One running TMK, the other running an Arduino sketch driving the LEDs. Pro Micro’s are connected to each other via hardware serial UART.

Pinout

Rows D1, D0, D4, C6 
Cols D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4

keymap_gnap.c contains functions to send bytes to the LED controller. The Arduino code interprets these to change modes or brightness.

//GNAP keymap functions
void gnaplight_step(void) {
    serial_send(101);
}

void gnaplight_toggle(void) {
    serial_send(100);
}

\tmk_core\common\keyboard.c was modified to send the row/column of the key being pressed encoded as as single byte over the serial link to the LED controller.

#ifdef GNAP_ENABLE
                //send single byte with value of row column
                serial_send((r*16)+c);
#endif

The example Arduino sketch LED_FastGPIO.ino uses the fastGPIO and TimerOne libraries. These can be installed with the Library manager.

FastGPIO TimerOne

readme.md

GNAP! keyboard firmware