123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899 |
- # Target file name (without extension).
- TARGET = terminal_bluefruit
-
- # Directory common source filess exist
- TMK_DIR = ../../tmk_core
-
- # Directory keyboard dependent files exist
- TARGET_DIR = .
-
- # keyboard dependent files
- SRC = keymap.c \
- matrix.c \
- led.c
-
- CONFIG_H = config.h
-
- BLUEFRUIT_TRACE_SERIAL=true
-
- # MCU name, you MUST set this to match the board you are using
- # type "make clean" after changing this, so all files will be rebuilt
- #MCU = at90usb162 # Teensy 1.0
- MCU = atmega32u4 # Teensy 2.0
- #MCU = at90usb646 # Teensy++ 1.0
- #MCU = at90usb1286 # Teensy++ 2.0
-
-
- # Processor frequency.
- # Normally the first thing your program should do is set the clock prescaler,
- # so your program will run at the correct speed. You should also set this
- # variable to same clock speed. The _delay_ms() macro uses this, and many
- # examples use this variable to calculate timings. Do not add a "UL" here.
- F_CPU = 16000000
-
-
- #
- # LUFA specific
- #
- # Target architecture (see library "Board Types" documentation).
- ARCH = AVR8
-
- # Input clock frequency.
- # This will define a symbol, F_USB, in all source code files equal to the
- # input clock frequency (before any prescaling is performed) in Hz. This value may
- # differ from F_CPU if prescaling is used on the latter, and is required as the
- # raw input clock is fed directly to the PLL sections of the AVR for high speed
- # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
- # at the end, this will be done automatically to create a 32-bit value in your
- # source code.
- #
- # If no clock division is performed on the input clock inside the AVR (via the
- # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
- F_USB = $(F_CPU)
-
- # Interrupt driven control endpoint task
- OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
- # Boot Section Size in bytes
- # Teensy halfKay 512
- # Atmel DFU loader 4096
- # LUFA bootloader 4096
- OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
- # Build Options
- # comment out to disable the options.
- #
- BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
- MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
- EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
- CONSOLE_ENABLE = yes # Console for debug(+400)
- COMMAND_ENABLE = yes # Commands for debug and configuration
- #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
- #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-
-
- #
- # PS/2 protocol implementations
- # USART is recommended if it is available, others are for reference purpose.
- # INT implementation will drop simultaneous key strokes.
- #
- #PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
- PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
- #PS2_USE_BUSYWAIT = yes # uses primitive reference code
-
- #---------------- Programming Options --------------------------
- PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
- # Search Path
- VPATH += $(TARGET_DIR)
- VPATH += $(TMK_DIR)
-
-
- include $(TMK_DIR)/protocol.mk
- include $(TMK_DIR)/protocol/bluefruit.mk
- include $(TMK_DIR)/protocol.mk
- include $(TMK_DIR)/common.mk
- include $(TMK_DIR)/rules.mk
|