di0ib/tmk_keyboard
1
0
Fork 0
Code Releases Activity
66b088e30e
tmk_keyboard/converter/xt_usb
History
tmk 7b31d1b9d9 Remove keymap read code from project directories
2016-08-29 13:54:44 +09:00
..
config.h Update config.h 2016-06-01 16:57:31 +02:00
keymap_common.h Remove keymap read code from project directories 2016-08-29 13:54:44 +09:00
keymap_jis.c Remove keymap read code from project directories 2016-08-29 13:54:44 +09:00
keymap_plain.c Remove keymap read code from project directories 2016-08-29 13:54:44 +09:00
keymap_spacefn.c Remove keymap read code from project directories 2016-08-29 13:54:44 +09:00
led.c Codes appear to be detected correctly, the break codes are broken. 2016-03-01 21:37:22 -08:00
Makefile Remove keymap read code from project directories 2016-08-29 13:54:44 +09:00
matrix.c Mostly working. Is unstable, will emit bad codes after a while. 2016-03-02 23:34:13 -08:00
README.md Update XT converter readme. 2016-06-01 08:34:14 -07:00

README.md

XT to USB keyboard converter

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

In case of Teensy2.0(ATMega32U4):

  1. Connect Vcc and GND.
  2. Connect Clock and Data line.
    • Interrupt: Clock is on PD1 and Data on PD0.(Recommended. Soarer's converter compatible)
  3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.

To change pin configuration edit config.h and Makefile.

Build Firmware

For PJRC Teensy just run make:

$ make clean
$ make

To select keymap:

$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]

After that you will find HEX file xt_usb_lufa.hex in current directory.

Keymap

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named keymap_<name>.c and see keymap document(you can find in README.md of top directory) and existent keymap files.