1fe4406f37
b9e0ea0 Merge commit '7fa9d8bdea3773d1195b04d98fcf27cf48ddd81d' as 'tool/mbed/mbed-sdk' 7fa9d8b Squashed 'tool/mbed/mbed-sdk/' content from commit 7c21ce5 git-subtree-dir: tmk_core git-subtree-split: b9e0ea08cb940de20b3610ecdda18e9d8cd7c552
535 lines
12 KiB
C++
535 lines
12 KiB
C++
/* mbed AX-12+ Servo Library
|
|
*
|
|
* Copyright (c) 2010, cstyles (http://mbed.org)
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "AX12.h"
|
|
#include "mbed.h"
|
|
|
|
AX12::AX12(PinName tx, PinName rx, int ID, int baud)
|
|
: _ax12(tx,rx) {
|
|
_baud = baud;
|
|
_ID = ID;
|
|
_ax12.baud(_baud);
|
|
|
|
}
|
|
|
|
// Set the mode of the servo
|
|
// 0 = Positional (0-300 degrees)
|
|
// 1 = Rotational -1 to 1 speed
|
|
int AX12::SetMode(int mode) {
|
|
|
|
if (mode == 1) { // set CR
|
|
SetCWLimit(0);
|
|
SetCCWLimit(0);
|
|
SetCRSpeed(0.0);
|
|
} else {
|
|
SetCWLimit(0);
|
|
SetCCWLimit(300);
|
|
SetCRSpeed(0.0);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
|
|
// if flag[0] is set, were blocking
|
|
// if flag[1] is set, we're registering
|
|
// they are mutually exclusive operations
|
|
int AX12::SetGoal(int degrees, int flags) {
|
|
|
|
char reg_flag = 0;
|
|
char data[2];
|
|
|
|
// set the flag is only the register bit is set in the flag
|
|
if (flags == 0x2) {
|
|
reg_flag = 1;
|
|
}
|
|
|
|
// 1023 / 300 * degrees
|
|
short goal = (1023 * degrees) / 300;
|
|
#ifdef AX12_DEBUG
|
|
printf("SetGoal to 0x%x\n",goal);
|
|
#endif
|
|
|
|
data[0] = goal & 0xff; // bottom 8 bits
|
|
data[1] = goal >> 8; // top 8 bits
|
|
|
|
// write the packet, return the error code
|
|
int rVal = write(_ID, AX12_REG_GOAL_POSITION, 2, data, reg_flag);
|
|
|
|
if (flags == 1) {
|
|
// block until it comes to a halt
|
|
while (isMoving()) {}
|
|
}
|
|
return(rVal);
|
|
}
|
|
|
|
|
|
// Set continuous rotation speed from -1 to 1
|
|
int AX12::SetCRSpeed(float speed) {
|
|
|
|
// bit 10 = direction, 0 = CCW, 1=CW
|
|
// bits 9-0 = Speed
|
|
char data[2];
|
|
|
|
int goal = (0x3ff * abs(speed));
|
|
|
|
// Set direction CW if we have a negative speed
|
|
if (speed < 0) {
|
|
goal |= (0x1 << 10);
|
|
}
|
|
|
|
data[0] = goal & 0xff; // bottom 8 bits
|
|
data[1] = goal >> 8; // top 8 bits
|
|
|
|
// write the packet, return the error code
|
|
int rVal = write(_ID, 0x20, 2, data);
|
|
|
|
return(rVal);
|
|
}
|
|
|
|
|
|
int AX12::SetCWLimit (int degrees) {
|
|
|
|
char data[2];
|
|
|
|
// 1023 / 300 * degrees
|
|
short limit = (1023 * degrees) / 300;
|
|
|
|
#ifdef AX12_DEBUG
|
|
printf("SetCWLimit to 0x%x\n",limit);
|
|
#endif
|
|
|
|
data[0] = limit & 0xff; // bottom 8 bits
|
|
data[1] = limit >> 8; // top 8 bits
|
|
|
|
// write the packet, return the error code
|
|
return (write(_ID, AX12_REG_CW_LIMIT, 2, data));
|
|
|
|
}
|
|
|
|
int AX12::SetCCWLimit (int degrees) {
|
|
|
|
char data[2];
|
|
|
|
// 1023 / 300 * degrees
|
|
short limit = (1023 * degrees) / 300;
|
|
|
|
#ifdef AX12_DEBUG
|
|
printf("SetCCWLimit to 0x%x\n",limit);
|
|
#endif
|
|
|
|
data[0] = limit & 0xff; // bottom 8 bits
|
|
data[1] = limit >> 8; // top 8 bits
|
|
|
|
// write the packet, return the error code
|
|
return (write(_ID, AX12_REG_CCW_LIMIT, 2, data));
|
|
}
|
|
|
|
|
|
int AX12::SetID (int CurrentID, int NewID) {
|
|
|
|
char data[1];
|
|
data[0] = NewID;
|
|
|
|
#ifdef AX12_DEBUG
|
|
printf("Setting ID from 0x%x to 0x%x\n",CurrentID,NewID);
|
|
#endif
|
|
|
|
return (write(CurrentID, AX12_REG_ID, 1, data));
|
|
|
|
}
|
|
|
|
|
|
int AX12::SetBaud (int baud) {
|
|
|
|
char data[1];
|
|
data[0] = baud;
|
|
|
|
#ifdef AX12_DEBUG
|
|
printf("Setting Baud rate to %d\n",baud);
|
|
#endif
|
|
|
|
return (write(0xFE, AX12_REG_BAUD, 1, data));
|
|
|
|
}
|
|
|
|
|
|
|
|
// return 1 is the servo is still in flight
|
|
int AX12::isMoving(void) {
|
|
|
|
char data[1];
|
|
read(_ID,AX12_REG_MOVING,1,data);
|
|
return(data[0]);
|
|
}
|
|
|
|
|
|
void AX12::trigger(void) {
|
|
|
|
char TxBuf[16];
|
|
char sum = 0;
|
|
|
|
#ifdef AX12_TRIGGER_DEBUG
|
|
// Build the TxPacket first in RAM, then we'll send in one go
|
|
printf("\nTriggered\n");
|
|
printf("\nTrigger Packet\n Header : 0xFF, 0xFF\n");
|
|
#endif
|
|
|
|
TxBuf[0] = 0xFF;
|
|
TxBuf[1] = 0xFF;
|
|
|
|
// ID - Broadcast
|
|
TxBuf[2] = 0xFE;
|
|
sum += TxBuf[2];
|
|
|
|
#ifdef AX12_TRIGGER_DEBUG
|
|
printf(" ID : %d\n",TxBuf[2]);
|
|
#endif
|
|
|
|
// Length
|
|
TxBuf[3] = 0x02;
|
|
sum += TxBuf[3];
|
|
|
|
#ifdef AX12_TRIGGER_DEBUG
|
|
printf(" Length %d\n",TxBuf[3]);
|
|
#endif
|
|
|
|
// Instruction - ACTION
|
|
TxBuf[4] = 0x04;
|
|
sum += TxBuf[4];
|
|
|
|
#ifdef AX12_TRIGGER_DEBUG
|
|
printf(" Instruction 0x%X\n",TxBuf[5]);
|
|
#endif
|
|
|
|
// Checksum
|
|
TxBuf[5] = 0xFF - sum;
|
|
#ifdef AX12_TRIGGER_DEBUG
|
|
printf(" Checksum 0x%X\n",TxBuf[5]);
|
|
#endif
|
|
|
|
// Transmit the packet in one burst with no pausing
|
|
for (int i = 0; i < 6 ; i++) {
|
|
_ax12.putc(TxBuf[i]);
|
|
}
|
|
|
|
// This is a broadcast packet, so there will be no reply
|
|
return;
|
|
}
|
|
|
|
|
|
float AX12::GetPosition(void) {
|
|
|
|
#ifdef AX12_DEBUG
|
|
printf("\nGetPosition(%d)",_ID);
|
|
#endif
|
|
|
|
char data[2];
|
|
|
|
int ErrorCode = read(_ID, AX12_REG_POSITION, 2, data);
|
|
short position = data[0] + (data[1] << 8);
|
|
float angle = (position * 300)/1024;
|
|
|
|
return (angle);
|
|
}
|
|
|
|
|
|
float AX12::GetTemp (void) {
|
|
|
|
#ifdef AX12_DEBUG
|
|
printf("\nGetTemp(%d)",_ID);
|
|
#endif
|
|
|
|
char data[1];
|
|
int ErrorCode = read(_ID, AX12_REG_TEMP, 1, data);
|
|
float temp = data[0];
|
|
return(temp);
|
|
}
|
|
|
|
|
|
float AX12::GetVolts (void) {
|
|
|
|
#ifdef AX12_DEBUG
|
|
printf("\nGetVolts(%d)",_ID);
|
|
#endif
|
|
|
|
char data[1];
|
|
int ErrorCode = read(_ID, AX12_REG_VOLTS, 1, data);
|
|
float volts = data[0]/10.0;
|
|
return(volts);
|
|
}
|
|
|
|
|
|
int AX12::read(int ID, int start, int bytes, char* data) {
|
|
|
|
char PacketLength = 0x4;
|
|
char TxBuf[16];
|
|
char sum = 0;
|
|
char Status[16];
|
|
|
|
Status[4] = 0xFE; // return code
|
|
|
|
#ifdef AX12_READ_DEBUG
|
|
printf("\nread(%d,0x%x,%d,data)\n",ID,start,bytes);
|
|
#endif
|
|
|
|
// Build the TxPacket first in RAM, then we'll send in one go
|
|
#ifdef AX12_READ_DEBUG
|
|
printf("\nInstruction Packet\n Header : 0xFF, 0xFF\n");
|
|
#endif
|
|
|
|
TxBuf[0] = 0xff;
|
|
TxBuf[1] = 0xff;
|
|
|
|
// ID
|
|
TxBuf[2] = ID;
|
|
sum += TxBuf[2];
|
|
|
|
#ifdef AX12_READ_DEBUG
|
|
printf(" ID : %d\n",TxBuf[2]);
|
|
#endif
|
|
|
|
// Packet Length
|
|
TxBuf[3] = PacketLength; // Length = 4 ; 2 + 1 (start) = 1 (bytes)
|
|
sum += TxBuf[3]; // Accululate the packet sum
|
|
|
|
#ifdef AX12_READ_DEBUG
|
|
printf(" Length : 0x%x\n",TxBuf[3]);
|
|
#endif
|
|
|
|
// Instruction - Read
|
|
TxBuf[4] = 0x2;
|
|
sum += TxBuf[4];
|
|
|
|
#ifdef AX12_READ_DEBUG
|
|
printf(" Instruction : 0x%x\n",TxBuf[4]);
|
|
#endif
|
|
|
|
// Start Address
|
|
TxBuf[5] = start;
|
|
sum += TxBuf[5];
|
|
|
|
#ifdef AX12_READ_DEBUG
|
|
printf(" Start Address : 0x%x\n",TxBuf[5]);
|
|
#endif
|
|
|
|
// Bytes to read
|
|
TxBuf[6] = bytes;
|
|
sum += TxBuf[6];
|
|
|
|
#ifdef AX12_READ_DEBUG
|
|
printf(" No bytes : 0x%x\n",TxBuf[6]);
|
|
#endif
|
|
|
|
// Checksum
|
|
TxBuf[7] = 0xFF - sum;
|
|
#ifdef AX12_READ_DEBUG
|
|
printf(" Checksum : 0x%x\n",TxBuf[7]);
|
|
#endif
|
|
|
|
// Transmit the packet in one burst with no pausing
|
|
for (int i = 0; i<8 ; i++) {
|
|
_ax12.putc(TxBuf[i]);
|
|
}
|
|
|
|
// Wait for the bytes to be transmitted
|
|
wait (0.00002);
|
|
|
|
// Skip if the read was to the broadcast address
|
|
if (_ID != 0xFE) {
|
|
|
|
|
|
|
|
// response packet is always 6 + bytes
|
|
// 0xFF, 0xFF, ID, Length Error, Param(s) Checksum
|
|
// timeout is a little more than the time to transmit
|
|
// the packet back, i.e. (6+bytes)*10 bit periods
|
|
|
|
int timeout = 0;
|
|
int plen = 0;
|
|
while ((timeout < ((6+bytes)*10)) && (plen<(6+bytes))) {
|
|
|
|
if (_ax12.readable()) {
|
|
Status[plen] = _ax12.getc();
|
|
plen++;
|
|
timeout = 0;
|
|
}
|
|
|
|
// wait for the bit period
|
|
wait (1.0/_baud);
|
|
timeout++;
|
|
}
|
|
|
|
if (timeout == ((6+bytes)*10) ) {
|
|
return(-1);
|
|
}
|
|
|
|
// Copy the data from Status into data for return
|
|
for (int i=0; i < Status[3]-2 ; i++) {
|
|
data[i] = Status[5+i];
|
|
}
|
|
|
|
#ifdef AX12_READ_DEBUG
|
|
printf("\nStatus Packet\n");
|
|
printf(" Header : 0x%x\n",Status[0]);
|
|
printf(" Header : 0x%x\n",Status[1]);
|
|
printf(" ID : 0x%x\n",Status[2]);
|
|
printf(" Length : 0x%x\n",Status[3]);
|
|
printf(" Error Code : 0x%x\n",Status[4]);
|
|
|
|
for (int i=0; i < Status[3]-2 ; i++) {
|
|
printf(" Data : 0x%x\n",Status[5+i]);
|
|
}
|
|
|
|
printf(" Checksum : 0x%x\n",Status[5+(Status[3]-2)]);
|
|
#endif
|
|
|
|
} // if (ID!=0xFE)
|
|
|
|
return(Status[4]);
|
|
}
|
|
|
|
|
|
int AX12::write(int ID, int start, int bytes, char* data, int flag) {
|
|
// 0xff, 0xff, ID, Length, Intruction(write), Address, Param(s), Checksum
|
|
|
|
char TxBuf[16];
|
|
char sum = 0;
|
|
char Status[6];
|
|
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf("\nwrite(%d,0x%x,%d,data,%d)\n",ID,start,bytes,flag);
|
|
#endif
|
|
|
|
// Build the TxPacket first in RAM, then we'll send in one go
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf("\nInstruction Packet\n Header : 0xFF, 0xFF\n");
|
|
#endif
|
|
|
|
TxBuf[0] = 0xff;
|
|
TxBuf[1] = 0xff;
|
|
|
|
// ID
|
|
TxBuf[2] = ID;
|
|
sum += TxBuf[2];
|
|
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf(" ID : %d\n",TxBuf[2]);
|
|
#endif
|
|
|
|
// packet Length
|
|
TxBuf[3] = 3+bytes;
|
|
sum += TxBuf[3];
|
|
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf(" Length : %d\n",TxBuf[3]);
|
|
#endif
|
|
|
|
// Instruction
|
|
if (flag == 1) {
|
|
TxBuf[4]=0x04;
|
|
sum += TxBuf[4];
|
|
} else {
|
|
TxBuf[4]=0x03;
|
|
sum += TxBuf[4];
|
|
}
|
|
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf(" Instruction : 0x%x\n",TxBuf[4]);
|
|
#endif
|
|
|
|
// Start Address
|
|
TxBuf[5] = start;
|
|
sum += TxBuf[5];
|
|
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf(" Start : 0x%x\n",TxBuf[5]);
|
|
#endif
|
|
|
|
// data
|
|
for (char i=0; i<bytes ; i++) {
|
|
TxBuf[6+i] = data[i];
|
|
sum += TxBuf[6+i];
|
|
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf(" Data : 0x%x\n",TxBuf[6+i]);
|
|
#endif
|
|
|
|
}
|
|
|
|
// checksum
|
|
TxBuf[6+bytes] = 0xFF - sum;
|
|
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf(" Checksum : 0x%x\n",TxBuf[6+bytes]);
|
|
#endif
|
|
|
|
// Transmit the packet in one burst with no pausing
|
|
for (int i = 0; i < (7 + bytes) ; i++) {
|
|
_ax12.putc(TxBuf[i]);
|
|
}
|
|
|
|
// Wait for data to transmit
|
|
wait (0.00002);
|
|
|
|
// make sure we have a valid return
|
|
Status[4]=0x00;
|
|
|
|
// we'll only get a reply if it was not broadcast
|
|
if (_ID!=0xFE) {
|
|
|
|
|
|
// response packet is always 6 bytes
|
|
// 0xFF, 0xFF, ID, Length Error, Param(s) Checksum
|
|
// timeout is a little more than the time to transmit
|
|
// the packet back, i.e. 60 bit periods, round up to 100
|
|
int timeout = 0;
|
|
int plen = 0;
|
|
while ((timeout < 100) && (plen<6)) {
|
|
|
|
if (_ax12.readable()) {
|
|
Status[plen] = _ax12.getc();
|
|
plen++;
|
|
timeout = 0;
|
|
}
|
|
|
|
// wait for the bit period
|
|
wait (1.0/_baud);
|
|
timeout++;
|
|
}
|
|
|
|
|
|
// Build the TxPacket first in RAM, then we'll send in one go
|
|
#ifdef AX12_WRITE_DEBUG
|
|
printf("\nStatus Packet\n Header : 0x%X, 0x%X\n",Status[0],Status[1]);
|
|
printf(" ID : %d\n",Status[2]);
|
|
printf(" Length : %d\n",Status[3]);
|
|
printf(" Error : 0x%x\n",Status[4]);
|
|
printf(" Checksum : 0x%x\n",Status[5]);
|
|
#endif
|
|
|
|
|
|
}
|
|
|
|
return(Status[4]); // return error code
|
|
}
|