Keyboard firmwares for Atmel AVR and Cortex-M
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Makefile 2.4KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283
  1. # Target file name (without extension).
  2. TARGET = pc98_usb
  3. # Directory common source filess exist
  4. TMK_DIR = ../../tmk_core
  5. # Directory keyboard dependent files exist
  6. TARGET_DIR = .
  7. # keyboard dependent files
  8. SRC = keymap.c \
  9. matrix.c \
  10. led.c \
  11. protocol/serial_uart.c
  12. # protocol/serial_soft.c
  13. CONFIG_H = config.h
  14. # MCU name, you MUST set this to match the board you are using
  15. # type "make clean" after changing this, so all files will be rebuilt
  16. #MCU = at90usb162 # Teensy 1.0
  17. MCU = atmega32u4 # Teensy 2.0
  18. #MCU = at90usb646 # Teensy++ 1.0
  19. #MCU = at90usb1286 # Teensy++ 2.0
  20. # Processor frequency.
  21. # Normally the first thing your program should do is set the clock prescaler,
  22. # so your program will run at the correct speed. You should also set this
  23. # variable to same clock speed. The _delay_ms() macro uses this, and many
  24. # examples use this variable to calculate timings. Do not add a "UL" here.
  25. F_CPU = 16000000
  26. #
  27. # LUFA specific
  28. #
  29. # Target architecture (see library "Board Types" documentation).
  30. ARCH = AVR8
  31. # Input clock frequency.
  32. # This will define a symbol, F_USB, in all source code files equal to the
  33. # input clock frequency (before any prescaling is performed) in Hz. This value may
  34. # differ from F_CPU if prescaling is used on the latter, and is required as the
  35. # raw input clock is fed directly to the PLL sections of the AVR for high speed
  36. # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  37. # at the end, this will be done automatically to create a 32-bit value in your
  38. # source code.
  39. #
  40. # If no clock division is performed on the input clock inside the AVR (via the
  41. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  42. F_USB = $(F_CPU)
  43. # Interrupt driven control endpoint task
  44. OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  45. # Build Options
  46. # *Comment out* to disable the options.
  47. #
  48. MOUSEKEY_ENABLE = yes # Mouse keys
  49. EXTRAKEY_ENABLE = yes # Audio control and System control
  50. CONSOLE_ENABLE = yes # Console for debug
  51. #NKRO_ENABLE = yes # USB Nkey Rollover
  52. # Boot Section Size in bytes
  53. # Teensy halfKay 512
  54. # Atmel DFU loader 4096
  55. # LUFA bootloader 4096
  56. OPT_DEFS += -DBOOTLOADER_SIZE=4096
  57. # Search Path
  58. VPATH += $(TARGET_DIR)
  59. VPATH += $(TMK_DIR)
  60. include $(TMK_DIR)/protocol/lufa.mk
  61. include $(TMK_DIR)/protocol.mk
  62. include $(TMK_DIR)/common.mk
  63. include $(TMK_DIR)/rules.mk