123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129 |
- #include <hidboot.h>
- #include <usbhub.h>
-
- // Satisfy the IDE, which needs to see the include statment in the ino too.
- #ifdef dobogusinclude
- #include <spi4teensy3.h>
- #include <SPI.h>
- #endif
-
- class KbdRptParser : public KeyboardReportParser
- {
- void PrintKey(uint8_t mod, uint8_t key);
-
- protected:
- void OnControlKeysChanged(uint8_t before, uint8_t after);
-
- void OnKeyDown (uint8_t mod, uint8_t key);
- void OnKeyUp (uint8_t mod, uint8_t key);
- void OnKeyPressed(uint8_t key);
- };
-
- void KbdRptParser::PrintKey(uint8_t m, uint8_t key)
- {
- MODIFIERKEYS mod;
- *((uint8_t*)&mod) = m;
- Serial.print((mod.bmLeftCtrl == 1) ? "C" : " ");
- Serial.print((mod.bmLeftShift == 1) ? "S" : " ");
- Serial.print((mod.bmLeftAlt == 1) ? "A" : " ");
- Serial.print((mod.bmLeftGUI == 1) ? "G" : " ");
-
- Serial.print(" >");
- PrintHex<uint8_t>(key, 0x80);
- Serial.print("< ");
-
- Serial.print((mod.bmRightCtrl == 1) ? "C" : " ");
- Serial.print((mod.bmRightShift == 1) ? "S" : " ");
- Serial.print((mod.bmRightAlt == 1) ? "A" : " ");
- Serial.println((mod.bmRightGUI == 1) ? "G" : " ");
- };
-
- void KbdRptParser::OnKeyDown(uint8_t mod, uint8_t key)
- {
- Serial.print("DN ");
- PrintKey(mod, key);
- uint8_t c = OemToAscii(mod, key);
-
- if (c)
- OnKeyPressed(c);
- }
-
- void KbdRptParser::OnControlKeysChanged(uint8_t before, uint8_t after) {
-
- MODIFIERKEYS beforeMod;
- *((uint8_t*)&beforeMod) = before;
-
- MODIFIERKEYS afterMod;
- *((uint8_t*)&afterMod) = after;
-
- if (beforeMod.bmLeftCtrl != afterMod.bmLeftCtrl) {
- Serial.println("LeftCtrl changed");
- }
- if (beforeMod.bmLeftShift != afterMod.bmLeftShift) {
- Serial.println("LeftShift changed");
- }
- if (beforeMod.bmLeftAlt != afterMod.bmLeftAlt) {
- Serial.println("LeftAlt changed");
- }
- if (beforeMod.bmLeftGUI != afterMod.bmLeftGUI) {
- Serial.println("LeftGUI changed");
- }
-
- if (beforeMod.bmRightCtrl != afterMod.bmRightCtrl) {
- Serial.println("RightCtrl changed");
- }
- if (beforeMod.bmRightShift != afterMod.bmRightShift) {
- Serial.println("RightShift changed");
- }
- if (beforeMod.bmRightAlt != afterMod.bmRightAlt) {
- Serial.println("RightAlt changed");
- }
- if (beforeMod.bmRightGUI != afterMod.bmRightGUI) {
- Serial.println("RightGUI changed");
- }
-
- }
-
- void KbdRptParser::OnKeyUp(uint8_t mod, uint8_t key)
- {
- Serial.print("UP ");
- PrintKey(mod, key);
- }
-
- void KbdRptParser::OnKeyPressed(uint8_t key)
- {
- Serial.print("ASCII: ");
- Serial.println((char)key);
- };
-
- USB Usb;
- //USBHub Hub(&Usb);
- HIDBoot<HID_PROTOCOL_KEYBOARD> HidKeyboard(&Usb);
-
- uint32_t next_time;
-
- KbdRptParser Prs;
-
- void setup()
- {
- Serial.begin( 115200 );
- #if !defined(__MIPSEL__)
- while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
- #endif
- Serial.println("Start");
-
- if (Usb.Init() == -1)
- Serial.println("OSC did not start.");
-
- delay( 200 );
-
- next_time = millis() + 5000;
-
- HidKeyboard.SetReportParser(0, (HIDReportParser*)&Prs);
- }
-
- void loop()
- {
- Usb.Task();
- }
|