123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107 |
- # Target file name (without extension).
- TARGET = ps2_usb_vusb
-
- # Directory common source filess exist
- TMK_DIR = ../../tmk_core
-
- # Directory keyboard dependent files exist
- TARGET_DIR = .
-
- # keyboard dependent files
- SRC = matrix.c \
- led.c
-
- ifdef KEYMAP
- SRC := keymap_$(KEYMAP).c $(SRC)
- else
- SRC := keymap_plain.c $(SRC)
- endif
-
- CONFIG_H = config.h
-
-
- # Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful.
- PS2_USE_USART = yes
-
-
- # V-USB debug level: To use ps2_usart.c level must be 0
- # ps2_usart.c requires USART to receive PS/2 signal.
- OPT_DEFS += -DDEBUG_LEVEL=0
-
-
- # MCU name, you MUST set this to match the board you are using
- # type "make clean" after changing this, so all files will be rebuilt
- #MCU = at90usb162 # Teensy 1.0
- #MCU = atmega32u4 # Teensy 2.0
- #MCU = at90usb646 # Teensy++ 1.0
- #MCU = at90usb1286 # Teensy++ 2.0
- #MCU = atmega168
- MCU = atmega328p
-
-
- # Processor frequency.
- # Normally the first thing your program should do is set the clock prescaler,
- # so your program will run at the correct speed. You should also set this
- # variable to same clock speed. The _delay_ms() macro uses this, and many
- # examples use this variable to calculate timings. Do not add a "UL" here.
- F_CPU = 12000000
-
-
- # Build Options
- # comment out to disable the options.
- #
- MOUSEKEY_ENABLE = yes # Mouse keys
- EXTRAKEY_ENABLE = yes # Audio control and System control
- #NKRO_ENABLE = yes # USB Nkey Rollover
- NO_UART = yes # UART is unavailable
-
-
-
- #---------------- Programming Options --------------------------
- AVRDUDE = avrdude
- # Type: avrdude -c ? to get a full listing.
- AVRDUDE_PROGRAMMER = usbasp
- AVRDUDE_PORT =
- AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
- #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
- # Uncomment the following if you want avrdude's erase cycle counter.
- # Note that this counter needs to be initialized first using -Yn,
- # see avrdude manual.
- #AVRDUDE_ERASE_COUNTER = -y
-
- # Uncomment the following if you do /not/ wish a verification to be
- # performed after programming the device.
- #AVRDUDE_NO_VERIFY = -V
-
- # Increase verbosity level. Please use this when submitting bug
- # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
- # to submit bug reports.
- #AVRDUDE_VERBOSE = -v -v
-
- #AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
- AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
- AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
- AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
- AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
- PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
- # Boot Section Size in bytes
- # Teensy halfKay 512
- # Atmel DFU loader 4096
- # LUFA bootloader 4096
- # USBasp 2048
- OPT_DEFS += -DBOOTLOADER_SIZE=2048
-
-
- # Search Path
- VPATH += $(TARGET_DIR)
- VPATH += $(TMK_DIR)
-
-
- include $(TMK_DIR)/protocol.mk
- include $(TMK_DIR)/common.mk
- include $(TMK_DIR)/protocol/vusb.mk
- include $(TMK_DIR)/rules.mk
|