12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697 |
- #
- # Makefile for V-USB
- #
-
-
- # Target file name (without extension).
- TARGET = hhkb_vusb
-
- # Directory common source filess exist
- TMK_DIR = ../../tmk_core
-
- # Directory keyboard dependent files exist
- TARGET_DIR = .
-
- # keyboard dependent files
- SRC = \
- keymap.c \
- matrix.c \
- led.c
-
- CONFIG_H = config_vusb.h
-
-
- # V-USB debug level: To use ps2_usart.c level must be 0
- # ps2_usart.c requires USART to receive PS/2 signal.
- OPT_DEFS = -DDEBUG_LEVEL=0
-
-
- # MCU name, you MUST set this to match the board you are using
- # type "make clean" after changing this, so all files will be rebuilt
- MCU = atmega328p
- # avrdude doesn't know atmega168p
- AVRDUDE_MCU = $(MCU)
-
-
- # Processor frequency.
- # Normally the first thing your program should do is set the clock prescaler,
- # so your program will run at the correct speed. You should also set this
- # variable to same clock speed. The _delay_ms() macro uses this, and many
- # examples use this variable to calculate timings. Do not add a "UL" here.
- F_CPU = 12000000
-
-
- # Build Options
- # comment out to disable the options.
- #
- BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
- MOUSEKEY_ENABLE = yes # Mouse keys
- EXTRAKEY_ENABLE = yes # Audio control and System control
- CONSOLE_ENABLE = yes # Console for debug
- COMMAND_ENABLE = yes # Commands for debug and configuration
- #NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
- #---------------- Programming Options --------------------------
- AVRDUDE = avrdude
- # Type: avrdude -c ? to get a full listing.
- AVRDUDE_PROGRAMMER = usbasp
- AVRDUDE_PORT =
- AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
- #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
- # Uncomment the following if you want avrdude's erase cycle counter.
- # Note that this counter needs to be initialized first using -Yn,
- # see avrdude manual.
- #AVRDUDE_ERASE_COUNTER = -y
-
- # Uncomment the following if you do /not/ wish a verification to be
- # performed after programming the device.
- #AVRDUDE_NO_VERIFY = -V
-
- # Increase verbosity level. Please use this when submitting bug
- # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
- # to submit bug reports.
- #AVRDUDE_VERBOSE = -v -v
-
- #AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
- AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
- AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
- AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
- AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
- PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-
- # Search Path
- VPATH += $(TARGET_DIR)
- VPATH += $(TMK_DIR)
-
- include $(TMK_DIR)/protocol/vusb.mk
- include $(TMK_DIR)/common.mk
- include $(TMK_DIR)/rules.mk
-
- debug-on: EXTRAFLAGS += -DDEBUG
- debug-on: all
|