123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156 |
- /*
- Copyright 2012 Jun Wako <[email protected]>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef CONFIG_H
- #define CONFIG_H
-
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x1111
- #define DEVICE_VER 0x0001
- #define MANUFACTURER geekhack
- #define PRODUCT Onekey
- #define DESCRIPTION t.m.k. keyboard firmware for Onekey
-
- /* key matrix size */
- #define MATRIX_ROWS 1
- #define MATRIX_COLS 1
-
- /* define if matrix has ghost */
- //#define MATRIX_HAS_GHOST
-
- /* Set 0 if debouncing isn't needed */
- #define DEBOUNCE 5
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /* key combination for command */
- #define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
- )
-
-
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
-
- /* PS/2 mouse */
- #ifdef PS2_USE_BUSYWAIT
- # define PS2_CLOCK_PORT PORTD
- # define PS2_CLOCK_PIN PIND
- # define PS2_CLOCK_DDR DDRD
- # define PS2_CLOCK_BIT 1
- # define PS2_DATA_PORT PORTD
- # define PS2_DATA_PIN PIND
- # define PS2_DATA_DDR DDRD
- # define PS2_DATA_BIT 2
- #endif
-
-
- /* PS/2 mouse interrupt version */
- #ifdef PS2_USE_INT
- /* uses INT1 for clock line(ATMega32U4) */
- #define PS2_CLOCK_PORT PORTD
- #define PS2_CLOCK_PIN PIND
- #define PS2_CLOCK_DDR DDRD
- #define PS2_CLOCK_BIT 1
- #define PS2_DATA_PORT PORTD
- #define PS2_DATA_PIN PIND
- #define PS2_DATA_DDR DDRD
- #define PS2_DATA_BIT 2
-
- #define PS2_INT_INIT() do { \
- EICRA |= ((1<<ISC11) | \
- (0<<ISC10)); \
- } while (0)
- #define PS2_INT_ON() do { \
- EIMSK |= (1<<INT1); \
- } while (0)
- #define PS2_INT_OFF() do { \
- EIMSK &= ~(1<<INT1); \
- } while (0)
- #define PS2_INT_VECT INT1_vect
- #endif
-
-
- /* PS/2 mouse USART version */
- #ifdef PS2_USE_USART
- #if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
- /* XCK for clock line and RXD for data line */
- #define PS2_CLOCK_PORT PORTD
- #define PS2_CLOCK_PIN PIND
- #define PS2_CLOCK_DDR DDRD
- #define PS2_CLOCK_BIT 5
- #define PS2_DATA_PORT PORTD
- #define PS2_DATA_PIN PIND
- #define PS2_DATA_DDR DDRD
- #define PS2_DATA_BIT 2
-
- /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
- /* set DDR of CLOCK as input to be slave */
- #define PS2_USART_INIT() do { \
- PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
- PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
- UCSR1C = ((1 << UMSEL10) | \
- (3 << UPM10) | \
- (0 << USBS1) | \
- (3 << UCSZ10) | \
- (0 << UCPOL1)); \
- UCSR1A = 0; \
- UBRR1H = 0; \
- UBRR1L = 0; \
- } while (0)
- #define PS2_USART_RX_INT_ON() do { \
- UCSR1B = ((1 << RXCIE1) | \
- (1 << RXEN1)); \
- } while (0)
- #define PS2_USART_RX_POLL_ON() do { \
- UCSR1B = (1 << RXEN1); \
- } while (0)
- #define PS2_USART_OFF() do { \
- UCSR1C = 0; \
- UCSR1B &= ~((1 << RXEN1) | \
- (1 << TXEN1)); \
- } while (0)
- #define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
- #define PS2_USART_RX_DATA UDR1
- #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
- #define PS2_USART_RX_VECT USART1_RX_vect
- #endif
- #endif
-
- #endif
|