12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879 |
- # Target file name (without extension).
- PROJECT = ch
-
- # Directory common source files exist
- TMK_DIR = ../../tmk_core
-
- # Directory keyboard dependent files exist
- TARGET_DIR = .
-
- # project specific files
- SRC = matrix.c \
- led.c
-
- ifdef KEYMAP
- SRC := keymap_$(KEYMAP).c $(SRC)
- else
- SRC := keymap_plain.c $(SRC)
- endif
-
- CONFIG_H = config.h
-
- # GENERIC STM32F103C8T6 board - stm32duino bootloader
- OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
- MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
- BOARD = GENERIC_STM32_F103
-
- # GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
- # OPT_DEFS =
- # MCU_LDSCRIPT = STM32F103x8
- # BOARD = GENERIC_STM32_F103
-
- # MAPLE MINI
- # OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
- # MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
- # BOARD = MAPLEMINI_STM32_F103
-
- ## chip/board settings
- # the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F1xx
- # linker script to use
- # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <this_dir>/ld/
- # startup code to use
- # is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP = stm32f1xx
- # it should exist either in <chibios>/os/hal/boards/
- # or <this_dir>/boards
- # Cortex version
- # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
- MCU = cortex-m3
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
- # If you want to be able to jump to bootloader from firmware on STM32 MCUs,
- # set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
- # ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
- # a custom board definition that you plan to reuse).
- # If you're not setting it here, leave it commented out.
- # It is chip dependent, the correct number can be looked up here (page 175):
- # http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- # This also requires a patch to chibios:
- # <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
- # Build Options
- # comment out to disable the options.
- #
- #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
- ## BOOTMAGIC is not supported on STM32 chips yet.
- MOUSEKEY_ENABLE = yes # Mouse keys
- EXTRAKEY_ENABLE = yes # Audio control and System control
- # CONSOLE_ENABLE = yes # Console for debug
- COMMAND_ENABLE = yes # Commands for debug and configuration
- SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
- NKRO_ENABLE = yes # USB Nkey Rollover
-
- include $(TMK_DIR)/tool/chibios/common.mk
- include $(TMK_DIR)/tool/chibios/chibios.mk
|