12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182 |
- /*
- Copyright 2012 Jun Wako <[email protected]>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef CONFIG_H
- #define CONFIG_H
-
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x3333
- #define DEVICE_VER 0x0100
- #define MANUFACTURER t.m.k.
- #define PRODUCT Sun keyboard converter
- #define DESCRIPTION converts Sun keyboard protocol into USB
-
-
- /* matrix size */
- #define MATRIX_ROWS 16
- #define MATRIX_COLS 8
-
-
- /* key combination for command */
- #define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
- keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
- )
-
-
- /* Serial(USART) configuration
- * asynchronous, negative logic, 1200baud, no flow control
- * 1-start bit, 8-data bit, non parity, 1-stop bit
- */
- #define SERIAL_BAUD 1200
-
- #define SERIAL_RXD_DDR DDRD
- #define SERIAL_RXD_PORT PORTD
- #define SERIAL_RXD_PIN PIND
- #define SERIAL_RXD_BIT 2
- #define SERIAL_RXD_VECT INT2_vect
- #define SERIAL_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_RXD_DDR &= ~(1<<SERIAL_RXD_BIT); \
- SERIAL_RXD_PORT |= (1<<SERIAL_RXD_BIT); \
- /* enable interrupt: INT2(rising edge) */ \
- EICRA |= ((1<<ISC21)|(1<<ISC20)); \
- EIMSK |= (1<<INT2); \
- } while (0)
- #define SERIAL_RXD_INT_ENTER()
- #define SERIAL_RXD_INT_EXIT() do { \
- /* clear interrupt flag */ \
- EIFR = (1<<INTF2); \
- } while (0)
- #define SERIAL_RXD_READ() (~SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT))
-
- #define SERIAL_TXD_DDR DDRD
- #define SERIAL_TXD_PORT PORTD
- #define SERIAL_TXD_PIN PIND
- #define SERIAL_TXD_BIT 3
- /* negative logic */
- #define SERIAL_TXD_ON() do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0)
- #define SERIAL_TXD_OFF() do { SERIAL_TXD_PORT |= (1<<SERIAL_TXD_BIT); } while (0)
- #define SERIAL_TXD_INIT() do { \
- /* pin configuration: output */ \
- SERIAL_TXD_DDR |= (1<<SERIAL_TXD_BIT); \
- /* idle */ \
- SERIAL_TXD_ON(); \
- } while (0)
-
- #endif
|