|
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139 |
- /* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
-
- This software may be distributed and modified under the terms of the GNU
- General Public License version 2 (GPL2) as published by the Free Software
- Foundation and appearing in the file GPL2.TXT included in the packaging of
- this file. Please note that GPL2 Section 2[b] requires that all works based
- on this software must also be made publicly available under the terms of
- the GPL2 ("Copyleft").
-
- Contact information
- -------------------
-
- Circuits At Home, LTD
- Web : http://www.circuitsathome.com
- e-mail : [email protected]
- */
-
- #ifndef USB_HOST_SHIELD_SETTINGS_H
- #define USB_HOST_SHIELD_SETTINGS_H
- #include "macros.h"
-
- ////////////////////////////////////////////////////////////////////////////////
- // DEBUGGING
- ////////////////////////////////////////////////////////////////////////////////
-
- /* Set this to 1 to activate serial debugging */
- #define ENABLE_UHS_DEBUGGING 0
-
- /* This can be used to select which serial port to use for debugging if
- * multiple serial ports are available.
- * For example Serial3.
- */
- #ifndef USB_HOST_SERIAL
- #define USB_HOST_SERIAL Serial
- #endif
-
- ////////////////////////////////////////////////////////////////////////////////
- // Manual board activation
- ////////////////////////////////////////////////////////////////////////////////
-
- /* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */
- #define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually
-
- /* Set this to 1 if you are using a Black Widdow */
- #define USE_UHS_BLACK_WIDDOW 0
-
- /* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */
- #define USE_XMEM_SPI_LOCK 0
-
- ////////////////////////////////////////////////////////////////////////////////
- // Wii IR camera
- ////////////////////////////////////////////////////////////////////////////////
-
- /* Set this to 1 to activate code for the Wii IR camera */
- #define ENABLE_WII_IR_CAMERA 0
-
- ////////////////////////////////////////////////////////////////////////////////
- // MASS STORAGE
- ////////////////////////////////////////////////////////////////////////////////
- // <<<<<<<<<<<<<<<< IMPORTANT >>>>>>>>>>>>>>>
- // Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives.
- // Each LUN needs ~13 bytes to be able to track the state of each unit.
- #ifndef MASS_MAX_SUPPORTED_LUN
- #define MASS_MAX_SUPPORTED_LUN 8
- #endif
-
- ////////////////////////////////////////////////////////////////////////////////
- // Set to 1 to use the faster spi4teensy3 driver.
- ////////////////////////////////////////////////////////////////////////////////
- #ifndef USE_SPI4TEENSY3
- #define USE_SPI4TEENSY3 1
- #endif
-
- ////////////////////////////////////////////////////////////////////////////////
- // AUTOMATIC Settings
- ////////////////////////////////////////////////////////////////////////////////
-
- // No user serviceable parts below this line.
- // DO NOT change anything below here unless you are a developer!
-
- #include "version_helper.h"
-
- #if defined(__GNUC__) && defined(__AVR__)
- #ifndef GCC_VERSION
- #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
- #endif
- #if GCC_VERSION < 40602 // Test for GCC < 4.6.2
- #ifdef PROGMEM
- #undef PROGMEM
- #define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4
- #ifdef PSTR
- #undef PSTR
- #define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source
- #endif
- #endif
- #endif
- #endif
-
- #if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING
- #define DEBUG_USB_HOST
- #endif
-
- #if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA
- #define WIICAMERA
- #endif
-
- // To use some other locking (e.g. freertos),
- // define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock.
- // NOTE: NO argument is passed. You have to do this within your routine for
- // whatever you are using to lock and unlock.
- #if !defined(XMEM_ACQUIRE_SPI)
- #if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API)
- #include <xmem.h>
- #else
- #define XMEM_ACQUIRE_SPI() (void(0))
- #define XMEM_RELEASE_SPI() (void(0))
- #endif
- #endif
-
- #if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP)
- #include <xmem.h>
- #else
- #define EXT_RAM 0
- #endif
-
- #if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__))
- #define USING_SPI4TEENSY3 USE_SPI4TEENSY3
- #else
- #define USING_SPI4TEENSY3 0
- #endif
-
- #if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3
- #include <SPI.h> // Use the Arduino SPI library for the Arduino Due, RedBearLab nRF51822, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available
- #endif
- #if defined(__PIC32MX__) || defined(__PIC32MZ__)
- #include <../../../../hardware/pic32/libraries/SPI/SPI.h> // Hack to use the SPI library
- #endif
-
- #endif /* SETTINGS_H */
|