tmk_keyboard_custom/common/bootloader.c

#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <util/delay.h>
#include "bootloader.h"

#ifdef PROTOCOL_LUFA
#include <LUFA/Drivers/USB/USB.h>
#endif


/* Boot Section Size in bytes
 * Teensy halfKay   512
 * Atmel DFU loader 4096
 * LUFA bootloader  4096
 */
#ifndef BOOT_SIZE
#define BOOT_SIZE 512
#endif
#define FLASH_SIZE          (FLASHEND + 1)
#define BOOTLOADER_START    (FLASH_SIZE - BOOT_SIZE)


/* 
 * Entering the Bootloader via Software 
 * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
 */
#define BOOTLOADER_RESET_KEY 0xB007B007
uint32_t reset_key  __attribute__ ((section (".noinit")));

/* initialize MCU status by watchdog reset */
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
    USB_Disable();
    cli();
    _delay_ms(2000);
#endif

#ifdef PROTOCOL_PJRC
    cli();
    UDCON = 1;
    USBCON = (1<<FRZCLK);
    UCSR1B = 0;
    _delay_ms(5);
#endif

    // watchdog reset
    reset_key = BOOTLOADER_RESET_KEY;
    wdt_enable(WDTO_250MS);
    for (;;);
}


/* this runs before main() */
void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
void bootloader_jump_after_watchdog_reset(void)
{
    if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {

        #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
        // This makes custom USBasploader come up.
        MCUSR = 0;
        #endif

        reset_key = 0;
        ((void (*)(void))BOOTLOADER_START)();
    }
}


#if 0
/* Jumping To The Bootloader
 * http://www.pjrc.com/teensy/jump_to_bootloader.html
 * 
 * This method doen't work when using LUFA. idk why.
 * - needs to initialize more regisers or interrupt setting?
 */
void bootloader_jump(void) {
#ifdef PROTOCOL_LUFA
    USB_Disable();
    cli();
    _delay_ms(2000);
#endif

#ifdef PROTOCOL_PJRC
    cli();
    UDCON = 1;
    USBCON = (1<<FRZCLK);
    UCSR1B = 0;
    _delay_ms(5);
#endif

    /*
     * Initialize
     */
#if defined(__AVR_AT90USB162__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
    TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
    DDRB = 0; DDRC = 0; DDRD = 0;
    PORTB = 0; PORTC = 0; PORTD = 0;
#elif defined(__AVR_ATmega32U4__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
    DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
    PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB646__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
    DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
    PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#elif defined(__AVR_AT90USB1286__)
    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
    DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
    PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#endif

    /*
     * USBaspLoader
     */
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
    // This makes custom USBasploader come up.
    MCUSR = 0;

    // initialize ports
    PORTB = 0; PORTC= 0; PORTD = 0;
    DDRB = 0; DDRC= 0; DDRD = 0;

    // disable interrupts
    EIMSK = 0; EECR = 0; SPCR = 0;
    ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
    ADCSRA = 0; TWCR = 0; UCSR0B = 0;
#endif

    // start Bootloader
    ((void (*)(void))BOOTLOADER_START)();
}
#endif