- M0110/M0110A to USB keyboard converter
- ======================================
- This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
- Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
- you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
-
- ![M0110](https://raw.github.com/tmk/tmk_keyboard/master/converter/m0110_usb/doc/m0110.jpg)
-
- - M0110A support was contributed by [skagon@github](https://github.com/skagon).
- - M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.
-
-
-
- Connection
- ----------
- You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
- Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
- you can change pin configuration with editing *config.h*.
-
- You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
- while Macintosh keyboard cable is *straight*.
-
- [![Conection](https://raw.github.com/tmk/tmk_keyboard/master/converter/m0110_usb/doc/teensy.jpg)]
-
- In this pic:
-
- 1. `GND`(Black)
- 2. `CLOCK`(Red)
- 3. `DATA`(Green)
- 4. `+5V`(Yellow)
-
- Note that wire colors may vary in your cable.
-
-
- ### Pinout
- - <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
- - <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
-
- ![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
-
-
- ### Pull-up Registor
- You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
- when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
- In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
-
-
-
- Building Frimware
- -----------------
- To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
- You can edit *Makefile* and *config.h* to change compile options and pin configuration.
-
- $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
- $ cd m0110_usb
- $ make -f Makefile.lufa clean
- $ make -f Makefile.lufa
-
- and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
-
-
-
- Keymap
- ------
- You can change keymaps by editing *keymap.c*.
-
- ### M0110 & M0120
- #### *Default*
- ,---------------------------------------------------------. ,---------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| -|Lft|Rgt|
- |---------------------------------------------------------| |---------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up|
- |---------------------------------------------------------| |---------------|
- |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| Dn|
- |---------------------------------------------------------| |---------------|
- |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
- `---------------------------------------------------------' |-----------|Ent|
- |Ctl|Alt | Space |Gui |Ctl| | 0| .| |
- `-----------------------------------------------' `---------------'
- #### *HHKB/WASD Layer(WASD/IJKL)*
- ,---------------------------------------------------------. ,---------------.
- |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt|
- |---------------------------------------------------------| |---------------|
- |Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau|Ins| | 7| 8| 9| Up|
- |---------------------------------------------------------| |---------------|
- |Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| Dn|
- |---------------------------------------------------------| |---------------|
- |Shift |End| |PgD| | | |PgD| |End| |Shift | | 1| 2| 3| |
- `---------------------------------------------------------' |-----------|Ent|
- |Ctl|Alt | Space |Gui |Ctl| | 0| .| |
- `-----------------------------------------------' `---------------'
-
- ### M0110A
- #### *Default*
- ,---------------------------------------------------------. ,---------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| =| /| *|
- |---------------------------------------------------------| |---------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
- |-----------------------------------------------------' | |---------------|
- |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
- |---------------------------------------------------------| |---------------|
- |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft| Up| | 1| 2| 3| |
- |---------------------------------------------------------| |-----------|Ent|
- |Alt |Gui | Space | \|Lft|Rgt| Dn| | 0| .| |
- `---------------------------------------------------------' `---------------'
- #### *Cursor Layer(WASD/IJKL)*
- ,---------------------------------------------------------. ,---------------.
- |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
- |---------------------------------------------------------| |---------------|
- |Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau| | | 7| 8| 9| -|
- |-----------------------------------------------------' | |---------------|
- |Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| +|
- |---------------------------------------------------------| |---------------|
- |Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| |
- |---------------------------------------------------------| |-----------|Ent|
- |Alt |Gui | Space |Ins|Hom|End|PgD| | 0| .| |
- `---------------------------------------------------------' `---------------'
-
-
-
- Debug
- -----
- You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
-
- The converter has some functions for debug, press `<magickey>+H` simultaneously to get help.
- These function is totally undocumented, tentative, inconsistent and buggy.
-
- magickey: Shift+Option+Command(Shift+Alt+Gui or Shift+Alt+Control)
|