2012-03-23 16:43:37 +00:00
/*
Copyright 2012 Jun Wako < wakojun @ gmail . com >
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 2 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# ifndef CONFIG_H
# define CONFIG_H
# define VENDOR_ID 0xFEED
# define PRODUCT_ID 0x6800
2016-03-29 01:52:25 +00:00
# define DEVICE_VER 0x0001
2012-03-23 16:43:37 +00:00
# define MANUFACTURER t.m.k.
# define PRODUCT SHARP X68000 keyboard converter
# define DESCRIPTION converts SHARP X68000 keyboard protocol into USB
/* matrix size */
# define MATRIX_ROWS 16
# define MATRIX_COLS 8
/* key combination for command */
# define IS_COMMAND() ( \
2012-10-17 12:43:44 +00:00
keyboard_report - > mods = = ( MOD_BIT ( KC_LALT ) | MOD_BIT ( KC_RALT ) ) | | \
2013-06-21 12:48:18 +00:00
keyboard_report - > mods = = ( MOD_BIT ( KC_LGUI ) | MOD_BIT ( KC_RGUI ) ) | | \
keyboard_report - > mods = = ( MOD_BIT ( KC_LCTL ) | MOD_BIT ( KC_RCTL ) ) \
2012-03-23 16:43:37 +00:00
)
/* USART configuration
* asynchronous , 2400 baud , 8 - data bit , non parity , 1 - stop bit , no flow control
*/
2016-03-29 01:52:25 +00:00
# if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__)
2013-06-21 07:34:39 +00:00
# define SERIAL_UART_BAUD 2400
# define SERIAL_UART_DATA UDR1
# define SERIAL_UART_UBRR ((F_CPU / (16UL*SERIAL_UART_BAUD))-1)
# define SERIAL_UART_RXD_VECT USART1_RX_vect
# define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
# define SERIAL_UART_INIT() do { \
UBRR1L = ( uint8_t ) SERIAL_UART_UBRR ; /* baud rate */ \
UBRR1H = ( uint8_t ) ( SERIAL_UART_UBRR > > 8 ) ; /* baud rate */ \
UCSR1B = ( 1 < < RXCIE1 ) | ( 1 < < RXEN1 ) | /* RX: interrupt, RX: enable */ \
( 1 < < TXEN1 ) ; /* TX: enable */ \
2013-06-21 12:48:18 +00:00
UCSR1C = ( 0 < < UPM11 ) | ( 0 < < UPM10 ) | /* parity: none(00), even(01), odd(11) */ \
( 0 < < UCSZ12 ) | ( 1 < < UCSZ11 ) | ( 1 < < UCSZ10 ) ; /* data-8bit(011) */ \
2013-06-21 07:34:39 +00:00
sei ( ) ; \
2012-03-23 16:43:37 +00:00
} while ( 0 )
# else
# error "USART configuration is needed."
# endif
# endif