Šis repozitorijs ir arhivēts. Ir iespējams aplūkot tā failus un to konēt, bet nav iespējams iesūtīt izmaiņas, kā arī izveidot jaunas problēmas vai izmaiņu pieprasījumus.
1. Install [WinAVR][winavr]. This is old but works well for this purpose. `WinAVR` is a tool set to build firmware including C compiler(gcc) and make commands. You can use [CrossPack][crosspack] instead if you are on Mac.
2. Install [Atmel FLIP][flip]. `FLIP` is a tool to program(load) firmware into AVR controller(ATMega32u4) via DFU bootloader. ATMega32u4 has DFU bootloader by factory default. You can use [dfu-programmer][dfu-prog] instead if you are on Mac.
3. Install driver for DFU bootloader. At first time you start DFU bootloader on Chip 'Found New Hardware Wizard' will come up on Windows. If you install device driver properly you can find chip name like 'ATmega32U4' under 'LibUSB-Win32 Devices' tree on 'Device Manager'. If not you shall need to update its driver on 'Device Manager'. You will find the driver in `FLIP` install directory like: C:\Program Files (x86)\Atmel\Flip 3.4.5\usb\. If you use `dfu-programmer` install its driver.
If you use PJRC Teensy you don't need step 2 and 3, just get [Teensy loader][teensy-loader].
### Download source
You can find firmware source at github: https://github.com/tmk/tmk_keyboard
If you are familiar with `Git` tools you are recommended to use it.
If not you can download zip archive from: https://github.com/tmk/tmk_keyboard/archive/master.zip
1. Open terminal window to get access to commands. You can use `cmd` in Windows or `Terminal.app` on Mac OSX. In Windows press `Windows` key and `R` then enter `cmd` in Run command dialog showing up.
2. Move to project directory in the firmware source.
cd tmk_keyboard/{keyboard or converter}/<project>
3. Build firmware using GNU `make` command. You'll see <project>_<variant>.hex file in that directory unless something unexpected occurs in build process.
Sock AVR USB chip including ATmega32U4 has DFU bootloader by factory default, you can use DFU tools for this purpose. `FLIP` is a DFU tool on Windows offered by Atmel. Open source command line DFU tool `dfu-programmer` also supports AVR chips, which run on Linux, Mac OSX and even Windows. If you have a PJRC Teensy you should use `Teensy Loader`.
#### DFU bootloader
To program AVR chip with DFU bootloader use `FLIP` or `dfu-programmer`.
If you have PJRC Teensy see instruction of `Teensy Loader` at: <http://www.pjrc.com/teensy/loader.html>
Or use this command if you have command line version of Teensy Loader installed.
$ make -f Makefile.<variant> teensy
#### Other programmer
You may want to use other you favorite programmer like `avrdude` with AVRISPmkII, Aruduino or USBasp. In that case you can still use make target `program` for build with configuring PROGRAM_CMD in Makefile.
$ make -f Makefile.<variant> program
#### FLIP GUI tutorial
1. On menu bar click Device -> Select, then. `ATmega32u4`.
2. On menu bar click Settings -> Communication -> USB, then click 'Open' button on 'USB Port Connection' dialog.
At this point you'll see greyouted widgets on the app get colored and ready.
3. On menu bar click File -> Load HEX File, then select your firmware hex file on File Selector dialog.
4. On 'Operations Flow' panel click 'Run' button to load the firmware binary to the chip. Note that you should keep 'Erase', 'Blank Check', 'Program' and 'Verify' check boxes selected.
5. Re-plug USB cord or click 'Start Application' button to restart your controller.
Many of existent projects offer keymap framework to define your own keymap easily. The following will explain how you can define keymap using this framework.
Instead, you can also implement your own `keymap_get_action()` to return action code for each key if you want.
This is keymap example for [HHKB](http://en.wikipedia.org/wiki/Happy_Hacking_Keyboard) keyboard. Keyamp is defined in `keymaps[]` array.
See `common/keycode.h`. Keycode is 8bit internal code to inidicate action performed on key in keymap. Keycode has `KC_` prefixed symbol respectively. Most of keycodes like 'KC_A' have simple action register key on press and unregister on release, on the other some of keycodes has some special actions like Fn keys, Media contorl keys, System control keys and Mouse keys.
***In `KEYMAP` definition you need to omit prefix part `KC_` of keycode to keep keymap compact.*** For example, just use `A` instead you place `KC_A` in `KEYMAP`. Some keycodes has 4-letter short name in addition to descriptive name, you'll prefer short one in `KEYMAP`.
**`KC_NO`** indicates the key has no keycode to transmit.
**`KC_LGUI`** and **`KC_RGUI`** are windows key or command key in Mac.
**`KC_FNnn`** are `Fn` keys which not given any action at the beginning unlike most of keycodes has its own action. To use these keys in `KEYMAP` you need to assign action you want at first. Action of `Fn` is defined in `fn_actions[]` and index of the array is identical with number part of `KC_FNnn`. Thus `KC_FN0` designates action defined in first element of the array. ***32 `Fn` keys can be defined at most.***
In regard to implementation side most of keycodes are identical with [HID usage] sent to host for real and some virtual keycodes are defined to support special actions.
See `common/action.h`. Action is a 16bit code and defines function to perform on events of a key like press, release, hold and tap. You can define various actions to use various action codes.
Most of keys just register 8bit keycode as HID usage(or scan code) to host, but to support other complex functions needs 16bit extended action codes internally. But using 16bit action codes with keymap results in double size in memory against keycodes. To avoid this waste 8bit keycodes are used in `KEYMAP` to define instead of action codes. ***Keycodes can be considered as subset of action codes.*** Like `KC_A`(0x04) is equal to a `Key` action(0x0004) that transmit keycode of `A`.
#### 2.1 Key action
Key is simple action that registers keycode on press of key and unregister on release.
You can define `Key` action on `A` with:
ACTION_KEY(KC_A)
But you won't need to use this expression directly because you can just put symbol like `A` in `KEYMAP`.
Say you want to assign a key to `Shift + 1` to get *!* or `Alt + Tab` to switch windows.
`Function` action can be defined freely in C function. ***TODO***
`Function` action is implemented in `keymap_call_function()`
### 3. Layer
Layer is key-action map to assign action to every physical key. You can define multiple layers in keymap and select a layer out of keymap during operation at will.
First layer is indexed by `Layer 0` which usually become **`default layer`** and active in initial state. **`current layer`** is active layer at that time and can be changed with user interaction. You can define **16 layers** at most in default keymap framework.
you can define a layer with placing keycode symbols separated with `comma` in `KEYMAP`, which is formed with resemblance to physical keyboard layout so as you can easily put keycode on place you want to map. ***You can define most of keys with just using keycodes*** except for `Fn` key serving special actions.
### 4. Layer switching
You can have some ways to switch layer with these actions.
There are two kind of layer switch action `Layer Set` and `Layer Bit` and two type of switching behaviour **Momentary** and **Toggle**.
#### 4.1 Momentary switching
Momentary switching changes layer only while holding Fn key.
##### 4.1.1 Momentary Set
This `Layer Set` action sets new layer(`Layer 1`) to `current layer` on key press event.
ACTION_LAYER_SET(1)
It switches to destination layer immediately when key is pressed, after that actions on keymap of destination layer is perfomed. ***Thus you shall need to place action to come back on destination layer***, or you will be stuck in destination layer without way to get back. To get back to `default layer` you can use this action.
ACTION_LAYER_DEFAULT
##### 4.1.2 Momentary Bit
This `Layer Bit` action performs XOR(`1`) with `current layer` on both press and release event. If you are on `Layer 0` now next layer to switch will be `Layer 1`. To come back to previous layer you need to place same action on destination layer.
ACTION_LAYER_BIT(1)
#### 4.2 Toggle switching
Toggle switching changes layer after press then release. You keep being on the layer until you press key to return.
##### 4.2.1 Toggle Set
This `Layer Set Toggle` action is to set `Layer 1` to `current layer` on release and do none on press.
ACTION_LAYER_SET_TOGGLE(1)
To get back to `default layer` you can use this action.
ACTION_LAYER_DEFAULT
##### 4.2.2 Toggle Bit
This `Layer Bit Toggle` action is to XOR `1` with `current layer` on release and do none on press. If you are on `Layer 2` you'll switch to `Layer 3` on press. To come back to previous layer you need to place same action on destination layer.
ACTION_LAYER_BIT_TOGGLE(1)
#### 4.3 Momentary switching with Tap key
These actions switch to layer only while holding `Fn` key and register key on tap. **Tap** means to press and release key quickly.
ACTION_LAYER_SET_TAP_KEY(2, KC_SCLN)
ACTION_LAYER_SET_BIT_KEY(2, KC_SCLN)
With these you can place layer switching function on normal alphabet key like `;` without losing its original register function.
#### 4.4 Momentary switching with Tap Toggle
This changes layer only while holding `Fn` key and toggle layer after several taps. **Tap** means to press and release key quickly.
ACTION_LAYER_SET_TAP_TOGGLE(layer)
ACTION_LAYER_BIT_TAP_TOGGLE(layer)
Number of taps can be defined with `TAPPING_TOGGLE` in `config.h`, `5` by default.
Legacy Keymap
-------------
This was used in prior version and still works due to legacy support code in `common/keymap.c`. Legacy keymap doesn't support many of features that new keymap offers.
In comparison with new keymap how to define Fn key is different. It uses two arrays `fn_layer[]` and `fn_keycode[]`. The index of arrays corresponds with postfix number of `Fn` key. Array `fn_layer[]` indicates destination layer to switch and `fn_keycode[]` has keycodes to send when tapping `Fn` key.
In following setting example, `Fn0`, `Fn1` and `Fn2` switch layer to 1, 2 and 2 respectively. `Fn2` registers `Space` key when tap while `Fn0` and `Fn1` doesn't send any key.
`Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.