|
1234567891011121314151617181920212223242526272829303132333435363738 |
- ASCII to USB keyboard protocol converter
- ========================================
- This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
- Target MCU is ATMega32u4 but other USB capable AVR will also work.
-
-
- Hardware
- --------
- Connect RX, TX and GND to UART pin of AVR. Note that you may need line drvier/level shfiter like MAX232 to interface high voltage of RS-232C.
-
-
-
- Build Firmware
- --------------
- Configure UART setting and Just use 'make'
-
- $ cd ascii_usb
- $ make
-
- Then, load the binary to MCU with your favorite programmer.
-
-
-
- Limitation
- ----------
- - This cannot see key up event, you cannot hold a key.
- - Alt, Gui(Win/Mac) modifier key are not available.
-
-
-
- TRS-80 model 100
- ----------------
- Use TELCOM program with setting: 19200bps/8bit/odd parity/1stop bit
- To set this configuration push Stat(F3) and input '9801D,10'. Then push Term(F4) to connect.
-
-
-
-
|