@@ -63,8 +63,10 @@ CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# atmega32u4 Teensy2.0 | |||
# atemga32u4 TMK Converter rev.1 | |||
# atemga32u2 TMK Converter rev.2 | |||
MCU = atmega32u2 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
@@ -106,7 +108,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 |
@@ -1,73 +0,0 @@ | |||
# Target file name (without extension). | |||
TARGET = adb_usb_pjrc | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
adb.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_ansi.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
#MCU = at90usb162 # Teensy 1.0 | |||
MCU = atmega32u4 # Teensy 2.0 | |||
#MCU = at90usb646 # Teensy++ 1.0 | |||
#MCU = at90usb1286 # Teensy++ 2.0 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+5000) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+600) | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover(+500) | |||
ADB_MOUSE_ENABLE = yes | |||
# ADB Mice need acceleration for todays much bigger screens. | |||
OPT_DEFS += -DADB_MOUSE_MAXACC=8 | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol/pjrc.mk | |||
include $(TMK_DIR)/protocol.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -0,0 +1,143 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = adb_usb_lufa | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
adb.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_ansi.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
# atmega32u4 Teensy2.0 | |||
# atemga32u4 TMK Converter rev.1 | |||
# atemga32u2 TMK Converter rev.2 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||
ADB_MOUSE_ENABLE = yes | |||
# ADB Mice need acceleration for todays much bigger screens. | |||
OPT_DEFS += -DADB_MOUSE_MAXACC=8 | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol/lufa.mk | |||
include $(TMK_DIR)/protocol.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -0,0 +1,143 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = adb_usb_lufa | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
adb.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_ansi.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
# atmega32u4 Teensy2.0 | |||
# atemga32u4 TMK Converter rev.1 | |||
# atemga32u2 TMK Converter rev.2 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=512 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||
ADB_MOUSE_ENABLE = yes | |||
# ADB Mice need acceleration for todays much bigger screens. | |||
OPT_DEFS += -DADB_MOUSE_MAXACC=8 | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol/lufa.mk | |||
include $(TMK_DIR)/protocol.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -1,8 +1,7 @@ | |||
ADB to USB keyboard converter | |||
============================= | |||
This firmware converts ADB keyboard protocol to USB. | |||
You can use PJRC Teensy for this converter, though, other USB AVR(ATMega32U4, AT90USB64/128 or etc) should work. | |||
But binary size is about 10KB or more it doesn't fit into 8K flash like ATMega8U2. | |||
You can use TMK Converter, PJRC Teensy2.0 and other USB AVR MCU(ATMega32U4, AT90USB64/128 or etc) for this. But binary size is probably more than 10KB and it won't fit into 8K flash. | |||
Discuss: http://geekhack.org/showwiki.php?title=Island:14290 | |||
@@ -54,22 +53,34 @@ Define following macros for ADB connection in config.h if you use other than por | |||
ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT | |||
Build | |||
----- | |||
See doc/build.md. In short, | |||
Build firmware and Program microcontroller | |||
------------------------------------------ | |||
See [doc/build.md](../../tmk_core/doc/build.md). | |||
To build firmware: | |||
$ make clean | |||
$ make | |||
$ make -f Makefile clean | |||
$ make -f Makefile | |||
You can select keymap(ansi is default) like this: | |||
$ make KEYMAP=[ansi|iso|hasu] | |||
$ make -f Makefile KEYMAP=[ansi|iso|hasu] | |||
To program TMK Converter: | |||
$ make -f Makefile dfu | |||
To program Teensy2.0: | |||
$ make -f Makefile.teensy teensy | |||
Use **Makefile.rev1** for TMK Converter rev.1 and **Makefile.teensy** for Teensy2.0 instead of **Makefile**. For TMK Converter rev.2 just use **Makefile**. | |||
Keymap | |||
------ | |||
You can change a keymap by editing code of keymap_[ansi|iso|hasu|yours].c. | |||
How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see doc/keymap.md for more detail. | |||
How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see [doc/keymap.md](../../tmk_core/doc/keymap.md) for more detail. | |||
Magic command | |||
@@ -85,6 +96,12 @@ https://github.com/tmk/tmk_keyboard/blob/master/README.md#mechanical-locking-sup | |||
Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch. | |||
Mouse support | |||
------------- | |||
ADB mouse support was added by @mek-apelsin on Apr,2015. It supports only one button as of now. | |||
https://github.com/tmk/tmk_keyboard/pull/207 | |||
Notes | |||
----- | |||
Not-extended ADB keyboards have no discrimination between right modifier and left one, |