tmk
9 years ago
3 changed files with 3 additions and 3 deletions
+ 1
- 1
converter/adb_usb/README.md
View File
| @@ -88,7 +88,7 @@ modifiers except for GUI key(Windows/Command). | |||
| And most ADB keyboard has no diodes in its matrix so they are not NKRO, | |||
| though ADB protocol itself supports it. See protocol/adb.c for more info. | |||
| If keyobard has ISO layout you need to use ISO keymap with `make KEYMAP=iso`. With ANSI | |||
| If keyboard has ISO layout you need to use ISO keymap with `make KEYMAP=iso`. With ANSI | |||
| keymap you will suffer from swapped keys problem. | |||
| https://github.com/tmk/tmk_keyboard/issues/35 | |||
+ 1
- 1
keyboard/hhkb/rn42/MEMO.txt
View File
| @@ -161,7 +161,7 @@ TROUBLE SHOOT | |||
| 07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive. | |||
| Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before. | |||
| 07/18 On Linux, had an USB related trouble; keyobard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it. | |||
| 07/18 On Linux, had an USB related trouble; keyboard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it. | |||
| 12/07 rn42_rts() read 1 every time. R12 broke in open mode(no coductive), idk why, too much heat with soldering? and PF1 pin was not soldered. | |||
| It resolved with resoldering PF1 and new resistor on R12. | |||
+ 1
- 1
protocol/adb.c
View File
| @@ -360,7 +360,7 @@ Commands | |||
| 3: mice | |||
| Registers: | |||
| 0: application(keyobard uses this to store its data.) | |||
| 0: application(keyboard uses this to store its data.) | |||
| 1: application | |||
| 2: application(keyboard uses this for LEDs and state of modifiers) | |||
| 3: status and command | |||